• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.3
• /
• pp.55-61
• /
• 2000

This paper presents an efficient hardware architecture of frame memory interface in MPEG-2 video encoder. To reduce the size of memory buffers between SDRAM and the frame memory module, the number of clocks needed for each memory access is minimized with dual bank operation and burst length change. By allocating the remaining cycles not used by SDRAM access, to the random access cycle, the internal buffer size, the data bus width, and the size of the control logic can be minimized. The proposed architecture is operated with 54MHz clock and designed with the VT $I^{тм}$ 0.5 ${\mu}{\textrm}{m}$ CMOS TLM standard cell library. It is verified by comparing the test vectors generated by the c-code model with the simulation results of the synthesized circuit. The buffer area of the proposed architecture is reduced to 40 % of the existing architecture.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.67-74
• /
• 2005

Crypto-systems have difficulties in designing hardware due to the various standards. We propose a programmable and configurable architecture for cryptography coprocessors to accommodate various crypto-systems. The proposed architecture has a 32 bit I/O interface and internal bus width, and consists of a programmable finite field arithmetic unit, an input/output unit, a register file, and a control unit. The crypto-system is determined by the micro-codes in memory of the control unit, and is configured by programming the micro-codes. The coprocessor has a modular structure so that the arithmetic unit can be replaced if a substitute has an appropriate 32 bit I/O interface. It can be used in many crypto-systems by re-programming the micro-codes for corresponding crypto-system or by replacing operation units. We implement an elliptic curve crypto-processor using the proposed architecture and compare it with other crypto-processors

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.4
• /
• pp.360-368
• /
• 2017

This paper proposes the 80-kW high-efficiency bidirectional hybrid SiC boost/buck converter using droop control for DC nano-grid. The proposed converter consists of four 20-kW modules to achieve fault tolerance, ease of thermal management, and reduced component stress. Each module is constructed as a cascaded structure of the two basic bi-directional converters, namely, interleaved boost and buck converters. A six-pack hybrid SiC intelligent power module (IPM) suitable for the proposed cascaded structure is adopted for high-efficiency and compactness. The proposed converter with hybrid switching method reduces the switching loss by minimizing switching of insulated gate bipolar transistor (IGBT). Each module control achieves smooth transfer from buck to boost operation and vice versa, since current controller switchover is not necessary. Furthermore, the proposed parallel control using DC droop with secondary control, enhances the current sharing accuracy while well regulating the DC bus voltage. A 20-kW prototype of the proposed converter has been developed and verified with experiments and indicates a 99.3% maximum efficiency and 98.8% rated efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.610-616
• /
• 2020

This study conducted joint research with the Navy logistics command ship technology research institute to resolve the occurrence of naval vessel's high-temperature warning and equipment shutdown caused by VRTU overheating during summer operation and the dispatch of troops to equatorial regions. The cooling effect was checked according to the installation of a thermoelectric device cooling system, and heat flow and heat transfer characteristics inside VRTU was analyzed using Computational Fluid Dynamics. In addition, the temperature distribution inside the engine room was assessed through interpretation, and the optimal installation location to prevent VRTU overheating was identified. As a result, the average volume temperature inside the VRTU decreased by approximately 10 ℃ with the installation of the cooling system, and the fan installed in the cooling system made the heat circulation smooth, enhancing the cooling effect. The inside of the engine room showed a high-temperature distribution at the top of the engine room, and the end of the HVAC duct diffuser showed the lowest temperature distribution.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.77-85
• /
• 2003

The conversion into a new Local Area Network (LAN) environment without clear analysis of the problems with the conventional LAN environment nay bring about some improvement of performance, but in general, the result would not be as good as expected. Besides, in case new traffic or application programs are added In the near future, traffic overload similar to the past may incur. Therefore, the conversion into a new LAN environment should not only relieve the problems with the conventional environment but also be able to cope with future expansion of the network flexibly. In the present paper, in view of the above, the problems with protocols and traffic that may occur in the Bus-structured 10/100 Mbps shared Ethernet that has been widely used by many institutions are reviewed, and as a case study whether such conversion into a new LAN environment in order to increase the efficiency in the operation, management, and utilization of the network would be proper for the actual operational environment is implemented, and the results are analyzed.

• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.70-80
• /
• 2017

According with annual report by the OECD (Organization for Economic Co-operation and Development), South Korea is at the top of the list of countries with bad air pollution (fine dust particles) and the South Korean government announced the cause to be due to the particle emissions of large and old diesel vehicles. To solve this issue, the government (jointly with related ministries), promoted the "Special Measures for Comprehensive Fine Dust Management Program" as a way to improve environmental pollution by reducing the overall output of fine dust particles emitted by public vehicles. The measure implemented a gas subsidy system to convert eco-friendly vehicles of city and chartered buses throughout the country. In this study, we take a look at the economical evaluation, comparison and analysis of the conversion of diesel vehicles to natural gas (CNG) vehicles. This report represent the basis for the need to expand the funds of the subsidy program and reviews the feasibility of the policy by taking into consideration the social and economical benefits and the effect in the environment when converting diesel fuel to natural gas vehicles through the type-specific fuel conversion scenarios.

• Plant Journal
• /
• v.12 no.4
• /
• pp.37-43
• /
• 2016

Power system which provides electricity to the accident mitigation load for nuclear power plant should be verified to maintain the proper voltage level under the various loading and source conditions. For this purpose, it was needed to collect the voltage data of safety related buses during operation of the Reactor Coolant Pump(RCP) motor and Component Cooling Water Pump(CCWP) motor, respectively, under the certain loading condition of the plant. The data (such as, voltage, current, power factor) collected from actual measurement were used to modify the existing ETAP model and then the reanalysis was conducted to simulate the testing conditions. Through these actual measurement and analysis, it ensures that the existing electrical system analysis including assumptions and methods was conducted properly. Finally, the voltage of safety related buses was not dropped below the acceptable level, and the discrepancy between two results was within the limit.

• Journal of the Korea Society for Simulation
• /
• v.15 no.2
• /
• pp.23-29
• /
• 2006

This paper studies the Internet stream server which serves multimedia stream services such as VoD and MoD. The Internet multimedia stream server is developed to provide 50 users with continuous multimedia stream contents simultaneously. This paper focuses on introducing design concepts, operation details and on evaluating system performance and doing sensitivity analysis with respect to the change of the system components. The performance evaluation is performed using simulation in order to identify the system component that mostly affects the system performance. The sensitivity analysis shows the service delay rates of the multimedia stream server depending on the user's service request pattern. Also, the analysis is made on the utilization rates of the core system components such as the PCI bus and the Ethernet card, and on the system performance change by adding more system components.

• Journal of Family Resource Management and Policy Review
• /
• v.21 no.3
• /
• pp.23-42
• /
• 2017

The purpose of this study was to identify the social networks used by the rural elderly and to analyze the effects of these social networks on the need for life services. The research subjects were 1,000 people aged 65 years and over living in the rural areas of Korea. Among the total 1,000 respondents, 979 elderly who have children were included in this study. The data were analyzed using frequency analysis, descriptive statistics, and multiple regression analysis. The results of this study were as follows. First, the frequency of contact with friends/neighbors was higher than that of children, whereas the social support of children was higher than that of friends/neighbors(excluding physical support). Second, the rate of use of home services and the elderly welfare center was very low. Promotion, a minimum cost burden, convenient transportation (circulation bus operation, etc.), and the provision of visiting services are examples of ways to be using them much more. Third, the elderly who do not live with their children have a higher need for life services. As well unlike the elderly who live with their children, in the case of the elderly who do not live with their children, the necessity for life services was influenced not only by their children but also by the relationship with their friends/neighbors and by home services. This implies that comprehensive social networks are important for the elderly who do not live with their children. Therefore, it is necessary to activate the social support of the community as well as of children and friends/neighbors.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1682-1688
• /
• 2017

In modern society, the number of industrial customers using equipment sensitive particularly to voltage sags is rapidly increasing. As voltage sags can cause loss of information as well as false operation of the control device, it results in the vast economic damage in industrial processes. One way to mitigate voltage sags in the sensitive loads is the installation of distributed generation (DGs) on the periphery of these loads. In addition, renewable energy sources are currently in the spot light as the potential solution for the energy crisis and environmental issues. In particular, wind power generation which is connected to a grid is rising rapidly because it is energy efficient and also economically feasible compared to other renewable energy sources. On the basis of the above information, in this paper, with Wind Turbine Generators (WTGs) installed nearby the sensitive load, the analysis of the mitigating effect comparison by types of WTGs is performed using voltage sag assessment on the IEEE-30 bus test system. That is, the areas of vulnerability according to types of WTGs are expected to be different by how much reactive power is produced or consumed as WTG reactive power capability is related to the types of WTGs. Using the concept of 'Vulnerable area' with the failure rate for buses and lines, the annual number of voltage sags at the sensitive load with the installation of WTGs per type is studied. This research will be anticipated to be useful data when determining the interconnection of wind power generation in the power system with the consideration of voltage sags.