• Archives of Plastic Surgery
• /
• v.34 no.4
• /
• pp.535-537
• /
• 2007

Purpose: We experienced a patient with posttraumatic duplication of the sternoclavicular joint causing a protruding deformity, whose major complaint was aesthetic. The patients history, radiologic findings, and surgical treatment are reported. Methods: A 41-year-old bus driver complained a bony prominence at the left medial clavicle, which had developed after a fracture. The patient was annoyed by the protrusion, which was even visible, when he was wearing a pullover. A three dimensional CT scan showed that the medial head was split into two portions, of which the anterior portion was protruding. In general anesthesia the anterior portion of the medial head was excised. Results: The bony prominence was corrected successfully. Follow up three dimensional CT scans showed that the anterior cortex of the clavicle had regenerated completely at the resection line one year after the operation. Conclusion: Surgical interventions for complications after clavicular fracture are usually carried out, only if there is a limitation of function or if it is painful. We report of a patient with posttraumatic bifurcation of the medial clavicular head, most probably caused by malunion. Upon the patient's request, the deformity causing protrusion of the medial clavicular area was successfully resected for cosmetic reasons.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_1
• /
• pp.139-147
• /
• 2020

In order to satisfy the voltage levels of the low voltage battery side and high voltage DC bus, a high voltage gain with bidirectional operation is required. In this system, the cost effectiveness of the design is a critical factor; therefore, the system should be designed using a small number of components. This paper propose a novel bidirectional converter composed with a quasi-sepic and switched-indictor network. The proposed converter consists a small number of components with a high voltage gain ratio. Detailed analysis are made with respect to the operating mode, number of components, voltage and current ripple and efficiency. To verify performance of the proposed converter, simulation was performed is this paper. The simulation results are shown to verify the feasibility and performance of the proposed bidirectional converter.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.437-442
• /
• 2021

This study describes the design and implementation of power supply of dehop/rehop transponder of EQM(Engineering Qualification Model). We materialized the interface of the PLDIU and power supply of a satellite bus, and minimized the potential for the occurrence of such erroneous operation circuit ESD through the WCA of the space environment. We designed a reliable power supply through simulation for TID about space radiation and simulation of the vibration generated during it launched, and we confirmed that it satisfies the environmental test specification through the test space environment after production.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.11-13
• /
• 2019

This paper proposes a novel high step-up non-isolated DC-DC converter, suitable for regulating dc bus in various inherent low voltage micro sources especially for photovoltaic (PV) and fuel cell sources. This novel high voltage Non-isolated Boost DC-DC converter topology is best replacement, where high voltage conversion ratio is required without the transformer and also need continuous input current. Since the proposed topology utilizes the stack-based structure, the voltage gain, and the efficiency are higher than other conventional non-isolated converters. Switches in this topology is easier to control since its control signal is grounding reference. Also, there is no need of extra gate driver and extra power supply for driver circuit, which reduces the cost and size of system. In order to show the feasibility and practicality of the proposed topology principle operation, steady state analysis and simulation result is presented and analyzed in detail. To verify the performance of proposed converter and theoretical analysis 360W laboratory prototype is implemented.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.274-284
• /
• 2019

The control architectures of Chuan Suo (CS) deep submergence rescue vehicle are introduced. The hardware and software architectures are also discussed. The hardware part adopts a distributed control system composed of surface and underwater nodes. A computer is used as a surface control machine. Underwater equipment is based on a multi-board-embedded industrial computer with PC104 BUS, which contains IO, A/D, D/A, eight-channel serial, and power boards. The hardware and software parts complete data transmission through optical fibers. The software part involves an IPC of embedded Vxworks real-time operating system, upon which the operation of I/O, A/D, and D/A boards and serial ports is based on; this setup improves the real-time manipulation. The information flow is controlled by the software part, and the thrust distribution is introduced. A submergence vehicle heeling control method based on ballast water tank regulation is introduced to meet the special heeling requirements of the submergence rescue vehicle during docking. Finally, the feasibility and reliability of the entire system are verified by a pool test.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.97-112
• /
• 2023

The purpose of this study is to design and test a new way of public transportation route guidance system for persons with disabilities, including wheelchair users. The guidance system is smartphone app-based, using, routes that involve disabled-friendly facilities in the vicinity can be searched. A database that contains publicly available data on low-floor bus services, location and extent of disabled-friendly facilities, and suitable subways and stations, was developed for this purpose. The app uses the database to access and query the required information. A pilot study was conducted to test the effectiveness of the guidance system. It was found that the system was able to convey information about the disabled-friendly routes and related guidance information even inside subway stations, effectively. The performance of the system was compared with route guidance services that do not explicitly use data on disabled-friendly services. A notable difference was observed in the travel time estimated by this program and other guidance services. The difference was around 4 to 15 minutes. This is significant savings for persons with disabilities if they use the app and service. The study thus shows that exclusive use of disabled-friendly data in route guidance will bring more benefits for persons with disabilities.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.723-728
• /
• 2022

This study is a method for evaluating and quantifying driver's dangerous driving behavior. The quantification method calculates various driving information in real time after starting the vehicle operation such as the time that the vehicle has been continuously driven without a break, overspeed, rapid acceleration, and overspeed driving time. These quantified risk of driving behavior values can be individually provided as a safe driving index, or can be used to objectify the evaluation of a group of drivers on roads, or vehicle groups such as cargo/bus/passenger vehicles.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1055-1057
• /
• 2009

전력시스템은 발전에서 수요에 이르기까지 다양한 설비 및 기기들이 유기적으로 결합되어 있고, 모든 과정이 실시간으로 운영되고 있는 매우 큰 규모의 시스템이다. 전력시스템에 IT 기술이 접목되면서 다양한 구성요소 간에 수많은 정보교환이 요구되는 시점에서 각 운영시스템별 독립적인 필요에 의해 상이한 플랫폼으로 개발되었기 때문에, 시스템 상호간 연계와 원활한 데이터 교환 및 유통을 통한 전체 전력시스템의 최적화를 이루는 데까지는 도달하지 못하고 있다. 다양한 운영시스템 상호간 데이터 교환을 위한 표준화 요구에 부응하여, 향후 전력시스템은 표준화되고 공개된 정보모델을 활용한 전사적 통합시스템 개발이 요구된다. 본 논문에서는 전력운영시스템 데이터 교환을 위한 메시지 버스에 대하여 기술하였다. 서로 다른 운영환경에서의 단위 운영시스템들을 동일한 플랫폼으로 재구성, 재개발하는 것이 어려운 상황에서 전력시스템 내 유통정보를 총체적으로 관리하고 이를 필요로 하는 운영시스템에 효율적으로 제공할 수 있는 인프라의 구축은 미래의 전력시스템의 부가가치를 높일 수 있는 기반을 제공할 것이다.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.1
• /
• pp.64-68
• /
• 2009

To keep the superconducting (SC) magnet coils of KSTAR at proper operating conditions, not only the coils but also other cold components, such as thermal shields (TS), magnet structures, SC bus-lines (BL), and current leads (CL) must be maintained at their respective cryogenic temperatures. A helium refrigeration system (HRS) with an exergetic equivalent cooling power of 9kW at 4.5K without liquid nitrogen $(LN_2)$ pre-cooling has been manufactured and installed for such purposes. In this proceeding, we will present the commissioning and initial operation results of the KSTAR HRS. Circuits which can simulate the thermal loads and pressure drops corresponding to the cooling channels of each cold component of KSTAR have been integrated into the helium distribution system of the HRS. Using those circuits, the performance and the capability of the HRS, to fulfill the mission of establishing the appropriate operating condition for the KSTAR SC magnet coils, have been successfully demonstrated.

• International journal of advanced smart convergence
• /
• v.11 no.1
• /
• pp.94-100
• /
• 2022

It is common for commercial vehicles to make the top part according to the use after making the bear chassis, and to connect various devices with the bear chassis. Various brackets used in bear chassis for the development of all automobiles, including commercial vehicles, play a role of connecting the components required for driving and operating the car to the car body. In commercial vehicles, components necessary for operation are installed in the bear chassis; that is, the bear chassis of commercial vehicles is a space where the devices required for driving and operating the vehicle are installed. The devices required for the configuration of the vehicle are drive, brake, exhaust and steering, etc. These devices are basically connected to the body, the front axis, or the rear axis. The part interlinking the apparatuses required for the vehicle drive to the car body or axis is bracket. In this study, we analyzed the boundary conditions to evaluate the stability of the three brackets that connect the components of the car to the front axis of the new type of 30-seater bus in the development process. In order to analyze the boundary conditions, the boundary conditions according to the driving condition of the vehicle were classified. For stress analysis to evaluate the stability of brackets according to the driving state of the vehicle, it is reasonable to give the bracket a boundary condition of harsh conditions.