• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.126-133
• /
• 2006

This paper describes an AMBA-based IP to perform forward and inverse transform and quantization required in the H.264 video compression standard. The transform and quantization circuit was optimized for area and performance. The AHB wrapper was added to the circuit for the AMBA-based operation. The user of the IP can specify how long the bus may be occupied by the IP and also where the video data are stored in the external memory. The function of the proposed IP based on AMBA Specification was verified on the platform board with Xilinx FPGA and ARM9 processor. We fabricated an MPW chip using $0.25{\mu}m$ standard cells and observed its correct operations on silicon.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1587-1596
• /
• 2020

The location selection for nuclear power plants (NPP) is a strategic decision, which has significant impact operation of the plant and sustainable development of the region. Further, the ranking of the alternative locations and selection of the most suitable and efficient locations for NPPs is an important multi-criteria decision-making problem. In this paper, the non-sequential Monte Carlo probabilistic method and the Latin hypercube sampling probabilistic method are used to evaluate and select the optimal locations for NPP. These locations are identified by the power plant's onsite loads and the average of the lowest number of relay protection after the NPP's trip, based on electricity considerations. The results obtained from the proposed method indicate that in selecting the optimal location for an NPP after a power plant trip with the purpose of internal onsite loads of the power plant and the average of the lowest number of relay protection power system, on the IEEE RTS 24-bus system network given. This paper provides an effective and systematic study of the decision-making process for evaluating and selecting optimal locations for an NPP.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.31-40
• /
• 2017

A novel voltage-fed single-stage power factor correction (PFC) full-bridge converter based on asymmetric phase-shifted control for battery chargers is proposed in this paper. The attractive feature of the proposed converter is that it can operate in a wide output voltage range without an output low-frequency ripple, which is indispensable in battery charger applications. Meanwhile, the converter can maintain a high power factor and a controllable dc bus voltage over a wide output voltage range. In this paper, the realization of PFC and the operation principle of asymmetric phase-shifted control are given. A small-signal analysis of the proposed single-stage power factor correction (PFC) full-bridge converter is performed. Experimental results obtained from a 1kW experimental prototype are given to validate the feasibility of the proposed converter. The PF is higher than 0.97 over the entire output voltage range with the proposed control strategy.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.7
• /
• pp.324-332
• /
• 2001

In this paper, it is suggested that the selection method of parameter of Power System Stabilizer(PSS) with robustness in low frequency oscillation for Static VAR Compensator(SVC) using a Real Variable Elitism Genetic Algorithm(RVEGA). A SVC, one of the Flexible AC Transmission System(FACTS), constructed by a fixed capacitor(FC) and a thyristor controlled reactor(TCR), is designed and implemented to improve the damping of a synchronous generator, as well as controlling the system voltage. The proposed PSS parameters are optimized using RVEGA in order to maintain optimal operation of generator under the various operating conditions. To decrease the computational time, real variable string is adopted. To verify the robustness of the proposed method, we considered the dynamic response of generator speed deviation and generator terminal voltage by applying a power fluctuation and three-phase fault at heavy load, normal load and light load. Thus, we prove the usefulness of proposed method to improve the stability of single machine-infinite bus with SVC system.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.248-251
• /
• 1992

In this paper, the RedMAP, i.e. a redundant Mini-MAP system for high reliability is proposed. Redundancy is implemented for LLC, MAC, and Physical layer of ISL-Mini -MAP. The detection of error of the network, the broadcasting of the error event, and the network change sequence are three major functions for the dualized Mini-MAP system. The abnormal operation of the network is mainly detected indirectly with the function of the TBC( token bus controller). The time delay to be required for the change of the networks must be minimized. With the RedMAP, we can achieve successful transmission only with short additional recovery time.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.533-538
• /
• 2016

In a power grid that has a high penetration of wind power, the highly-fluctuating output power of wind turbine generators (WTGs) adversely impacts the power quality in terms of the system frequency. This paper proposes a power smoothing scheme of a variable-speed WTG that can smooth its fluctuating output power caused by varying wind speeds, thereby improving system frequency regulation. To achieve this, an additional loop relying on the frequency deviation that operates in association with the maximum power point tracking control loop, is proposed; its control gain is modified with the rotor speed. For a low rotor speed, to ensure the stable operation of a WTG, the gain is set to be proportional to the square of the rotor speed. For a high rotor speed, to improve the power smoothing capability, the control gain is set to be proportional to the cube of the rotor speed. The performance of the proposed scheme is investigated under varying wind speeds for the IEEE 14-bus system using an EMTP-RV simulator. The simulation results indicate that the proposed scheme can mitigate the output power fluctuation of WTGs caused by varying wind speeds by adjusting the control gain depending on the rotor speed, thereby supporting system frequency regulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.841-846
• /
• 2010

Reliability in electrical power system refers to normal operation for schedule time in some system that action consists. It means that if there is no contingency of electric power supply decrease or load curtailment, reliability of the system is high. In this paper, a method for evaluation of transmission capability is proposed considering reliability standards. Deterministic and probabilistic methods for evaluation of transmission capability has been studied. These researches considered uncertainty of system components or N-1 contingency only. However, the proposed method can inform customers and system operators more suitable transmission capability. Well-being method using state probabilities of system components proves to be a more effective method in this paper comparing with calculation of LOLE(Loss of Load Expectation). The length of calculation is shorter but it can give more practical information to the exact system operators. Well-being method is applied to IEEE-RTS 24bus system to evaluate reliability in case study. The result is compared with a existing way to evaluate reliability with LOLE and it shows that transmission capability connected with adjacent networks. This paper informs system operators and power suppliers of reliable information for operating power system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.51-55
• /
• 2015

In this paper, we proposed scheme that obtain diversity gain in the cooperative communication to mitigate, applied to the effects of fading in the vehicle communication. Relay used bus that can available in the city environment. In addition, we applied the double rayleigh fading environment so that can applied in real-environments. Therefore, proposed scheme through this paper applied to vehicle communication, user can acquire a high quality service and the operation efficiency of the network is improved. Finally, performance of the proposed protocol is analyzed in terms of bit error rate.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.10
• /
• pp.977-981
• /
• 2015

We propose a method for the implementation of an EtherCAT communication bus in a Linux-based open source Computerized Numerical Control (CNC) system. Recently, increasingly more CNC systems support real-time Ethernet protocols such as EtherCAT, which is a high-performance industrial communication protocol. For real-time CNC control over an Ethernet-based protocol, an additional layer driver needs to be implemented between the CNC system and the master of industrial communication protocol. Among the various solutions for the connection layer driver, we employ a Hardware Abstraction Layer (HAL) driver based on Linux. The operation of the implemented CNC system is demonstrated and confirmed by Hal Meter, which is used to observe the pins, signals, or parameters of HAL.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.1
• /
• pp.153-160
• /
• 1996

In this paper, we propose an efficient digital architecture for the discrete-time cellular neural networks (DTCNN's). DTCNN's have the locality and the translation invariance in the templates which determine the patterns of the connection between the cells. Using distributed arithmetic (DA) and the characteristics of DTCNN, we propose a simple implementation of DTCNN. The bus width in the cell-to-cell interconnection is reduced to one bit because of DA's bitwise operation. We implemented the reconfigurable architecture of DTCNN using programmable FPGA.