• Journal of Korean Society of Transportation
• /
• v.31 no.4
• /
• pp.18-31
• /
• 2013

The operational purpose of exclusive bus lanes is to ease traffic congestion through the increase of person-carrying capacity on arterial roads. It is necessary to study on the route suitability for exclusive bus lanes because their operation may worsen traffic congestion due to the misuse of general purpose lane for an exclusive bus lane. This research quantifies the route suitability for exclusive bus lanes in Kwangju-city utilizing 7 indexes such as bus traffic volume, number of bus routes, traffic volume per lane, number of lane, number of intersection, number of streets, rate of curvature for the exclusive bus lane, recognizing the problem that the current installation standard of exclusive bus lanes is only limited to the bus traffic volume and the number of bus passengers. In addition, this research analyzes the operational efficiency for exclusive bus lanes, which is currently operated and their optimal operation hours.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.85-97
• /
• 2010

The present study aims at estimating the model of bus bunching duration along with its influential determinants in an attempt to understand the status of bus bunching being created by buses from various routes converging into one bus stop. To do so, the duration analysis, a well-known survival analysis, was adopted in order to capture the distribution of duration time as for 8 base lines, accordingly developing the model best fit for weibull distribution. Key attention to draw out the duration time model for bus bunching phenomena was laid, by analyzing 18 impact factors, on such criterion variables as number of berth, number of bus line in each berth and maximum capacity of on-and-off passengers in each line. Comparison in two typical types of bus lane was made between bus-only center lane(Dobong Mia-ro) and normal street-side lane(Tongil Euiju-ro). In this regard, the study, based on the model as above, suggested appropriate alternatives to improve the bus operation by effectively controlling bus bunching.

• Journal of Korean Society of Transportation
• /
• v.29 no.5
• /
• pp.43-54
• /
• 2011

After implementing "Semi-public management system of intra-city bus", the burden of financial aid for unprofitable routes is on the increase in Busan metro city. It becomes a heavy burden on the local finance, which needs to be resolved for improving the intra-bus system. The rainfall is one of the factors influencing the demands for intra-bus in urban transportation. Motivated by this fact, this study investigates the impact of rainfall on the intra-city bus demand. Actual bus users are surveyed on their patterns and recognition of using the bus according to the amount of rainfall. A rainfall forecast model using ordered probit model is presented, and the elasticity of the intra-city bus utilization to the amount of rainfall is also analyzed. The resulting findings could be applied to promote the use of intra-city buses and also be utilized as basic data for other studies to improve the intra-city bus system.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.53-61
• /
• 2005

The Seoul City Government recently reformed the entire public transport system in an effort to prevent further deterioration in urban bus system's performance and service level. To analyze into impact on the productivity of Seoul's urban bus firms, this paper measures firm-level technical efficiency and productivity change with data envelopment analysis and Malmquist index approach. The paper then conceptualizes that these forms produce three kinds of output (bus-kilometers, passengers, or bus-kilometers and passengers) using five inputs (driver, maintenance, management, vehicle and fuel). The findings show that most (over one half) firms experienced a decline (an improvement) in productivity in the case of specifying only bus-kilometers (passengers) as output. As a result, it is discovered that an average firm had no change in productivity in the case of combining bus-kilometers and passengers as output. This is because the efficiency of an average firm declined due to increase in employees per bus and to an decrease in kilometers per bus. while its effectiveness improved due to an increase in passengers per bus which was caused by an increase in routes and a change in fare structure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2455-2464
• /
• 2013

This study is focused on the effect of reformation of public transportation system on the efficiency of bus route system as a result of change of government subsidy scheme. Two types of government subsidy scheme has been considered and before and after analysis by Data Envelopment Analysis technique has been carried out for bus routes in Ulsan Metropolitan City. The analysis output has shown that there is no clear evidence to clarify the relationship between the change of government subsidy scheme and the efficiency of bus route system. There are two types of backgrounds may be suggested for this situation such as more longer period necessary to identify the policy effect and limitation to increase the number of passenger in a provincial city. Tobit regression analysis has also been conducted to discover the most effective variables for maximum efficiency and three variables including route length, frequency per vehicle per day, and headway are found to be influential. It is also seen that strategy to minimising input factors and service upgrade plan such as shortened route length and headway, increasing frequency per vehicle are necessary to develop the efficiency of bus routes operated in Ulsan city.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.93-103
• /
• 2019

In metropolitan cities have been reorganizing the routes of the city buses periodically due to changes in the spatial structure and traffic pattern and the lack of supply due to new developments. However, there is a lack of system to comprehensively evaluate the routes. Even if the evaluation index is not clearly defined, it may not be reasonable. Therefore, it is difficult to set the improvement direction when the bus route is reorganized. In this study, the existing evaluation indexes were reviewed and further investigation was conducted on the problematic indexes. In particular, the degree of curvature has been used as a very important index in the evaluation of the route system, but the existing curvature based curvature has a limitation in considering the traffic characteristics of individual users. For this purpose, a virtual city bus network was set up and the degree of curvature was calculated and compared based on the point - based curvature and stopping point based on individual user O/D. In this study, it is considered that more efficient and practical analysis and evaluation are possible in the evaluation of the city bus route system through the curvature considering the individual user O/D based on the stopping point. It is expected that it will be used at the time of reorganization of city bus route performed by individual local governments in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.223-229
• /
• 2010

The bus transfer system has been extended from Seoul to Gyonggi province to provide better Seoul metropolitan area transit service in September, 2008. Moreover, the curved bus routes, except existing rapid bus routes, which cause longer travel time have been straightened out. Also, the Skip Stop operation suggested by passengers has been introduced to main stops in the newly added express bus lines. This study surveyed passengers service satisfaction for the recent adopted bus policies such as the transfer discount system and the express bus system in Seoul Metropolitan area. The survey results may be important foundation for future strategies for improvement. The survey included questionnaires about the importance and the satisfaction level on both quantitative and qualitative factors. The results were statistically analyzed by the modified IPA (Importance-Performance Analysis). As the result of the survey, the newly adopted services such as fare system, fare discount on transferring, travel time savings and increased number of stops are economically feasible and satisfactory, whereas the accessibility to stops, ventilation and air quality in vehicles are the priorities to be improved. Also, the safety and the information system is in need of improvement.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.3
• /
• pp.205-213
• /
• 2015

The objective of the current study was to assess the comparative risk associated with exposure to particulate matter (PM) while commuting via different public transport modes in Fukuoka, Japan. For the given routes and measuring days, a trip-maker carried a lightweight portable bag loaded the real-time measurement devices which take simultaneous measurement for size-fractioned particle number concentration, $PM_{2.5}$ mass concentration, and total suspended particle (TSP) collection. The results of the present study have shown significant differences between public transports as commuting modes in Fukuoka. The PM exposure levels on subway platform and inside subway train were overwhelmingly higher than those of other points on commuting route. The relative ratio between modes (i.e., the ratio of $PM_{2.5}$ inside subway to that inside bus) provides an idea for choosing a right commuting mode for our health. This study clearly provided evidence of the extremely high levels of iron exposure by subway uses compared to bus uses. The result of theoretically reconstructed mass concentration of $PM_{2.0-0.3}$ collected on subway platform suggests that the PM of underground subway will be associated with PM both generated in subway system and inleakaged from outdoor environment.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.479-484
• /
• 2003

In the case of the feeder bus route choice, it is more desirable to choose the route by treating as a single route linked from origin to destination than the whole network. This study is to establish a concept that frames the feeder bus route choice technique for the change of the existing single bus route or the creation of the new feeder bus route. The concept of the feeder bus route choice technique in this study is not to frame the whole bus network but to frame a single route to a unit O-D pair. So, this study has the assumption that does not consider the waiting and transfer time at the bus stop. This system technique consists of the following phases: I) limitation of the road network examined for the study, ii) enumeration of the appropriate candidate routes by the permissive route length, and iii) determination of the optimum bus route by the route evaluation value.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.588-594
• /
• 2016

As more populations are getting older, the number of vulnerable pedestrians is increasing, thereby social problems related to transportations also frequently occur in different areas and situations. Many of such problems come from bus drivers who may pass bus stops not recognizing passengers about to board. In this paper, we propose a new IoT bus notification system developed to avoid these situations. Our implementation aims to gain bus service routes using publicly opened data, notify passengers about bus stop locations using GPS information and finally deliver the positions of those passengers to the bus drivers so that they can hardly miss passengers who are willing to board on the right stop. By creating an application, it was conducted by means of a GPS to communicate the location of the vehicle by means of GPS and transfer data to the location of the vehicle. Experimental results show that it is possible to accurately determine the position of passengers even in a crowded race area. The average error distance is 31m, and if the data to be processed as error is excluded, it provides a high reliability as 19m.