• 전기학회논문지P
• /
• 제63권4호
• /
• pp.312-316
• /
• 2014

In this paper, a voltage sag is analyzed in case of superconducting fault current limiter (SFCL) installed in power distribution system where replaces the main power transformer to large one to meet the power demand. First, the power system is configurated to analyze the operation characteristics of the protective relay with replacement of the main transformer and application of the SFCL. Next, the method to meet the protection coordination is analyzed with large transformer using PSCAD/EMTDC. Finally, the bus voltage is investigated according to the impedance of both main transformer and SFCL in case that the SFCL is applied into feeder.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1231-1234
• /
• 1998

Design & Operation of power system for meeting increase of electric power demand is becoming more difficult and complex. One of reasons is increase of fault current. As one of the most effective methods for suppressing the fault current, installation of SFCL is expected. This paper describes a method of fault analyses of power system with SFCLs, and also discusses determination of specification of SFCLs, effects of limiting the fault current due to SFCLs by use of the model system of two - bus electric power system with parallel circuit model transmission line. Also, describes the definition of six specific parameters of SFCL for power system application & a proposal of design method of specific parameter of a resistance type SFCL in overhead transmission lines considering operation of protective relays.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.893-895
• /
• 1998

This paper presents the adaptive setting method of distance relay under the single line ground fault. The apparent impedance measured at the relaying point and actual impedance is different because of fault resistance and various prefault loading condition. For a resistance earth fault detection, relay setting zone is adaptively changed with measured load current and bus voltage at the relaying point to avoid maloperation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.553-558
• /
• 2002

The harmonics in railway high voltage system is due to common use of 3 phase incoming bus and doing the power converter for traction system on the electric car(or electric locomotive). This paper, we analyze the harmonics mechanism and characteristics of railway high voltage system, also we analyze the problem according to the actual measurement about influence of harmonicsontherailwayhighvoltagesystem. And we proved the countermeasure device(passive filter or L-C filter) of harmonics applies in the field. The test result, we have know that the filter is not fit. Consequently, The countermeasure of harmonics for the railway high voltage system be able to resolve by another filter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.243-245
• /
• 2004

This paper proposes the discrimination method for the fault location, whether it is within the line where the distributed generation(DG) is integrated or out of the line (but sharing the same bus of the substation). In general, DG has to be disconnected from the grid when the fault occurs on the interconnected distribution feeder as soon as possible. However, the faults occured on the neighboring feeder would mistakenly cause the disconnection of the DG. For reliable operation of DG, DG should be sustained at the fault occurred on neighboring distribution feeders. The proposed identification method utilizes the impedance monitored from the DG and examines the coordination of overcurrent relay of the distribution system. This paper describes how the proposed method to identify the faulted feeder and how the method can be utilized.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2256-2261
• /
• 2015

In the power plant using high temperature fuel cells such as Molten Carbonate Fuel Cell(MCFC), and Solid Oxide Fuel Cell(SOFC), the generated electric power per area of power generation facilities is much higher than any other renewable energy sources. - High temperature fuel cell systems are capable of operating at MW rated power output. - It also has a feature that is short for length of the line for connecting the interior of the generation facilities. In normal condition, these points are advantages for voltage drops or power losses. However, in abnormal condition such as fault occurrence in electrical system, the fault currents are increased, because of the small impedance of the short length of power cable. Commonly, to minimize the thermal-mechanical stresses on the stack and increase the systems reliability, we divided the power plant configuration to several banks for parallel operation. However, when a fault occurs in the parallel operation system of power main transformer, the fault currents might exceed the interruption capacity of protective devices. In fact, although the internal voltage level of the fuel cell power plant is the voltage level of distribution systems, we should install the circuit breakers for transmission systems due to fault current. To resolve these problems, the SFCL has been studied as one of the noticeable devices. Therefore, we analyzed the effect of application of the SFCL on bus tie in a fuel cell power plants system using PSCAD/EMTDC.

• 한국위성정보통신학회논문지
• /
• 제1권2호
• /
• pp.95-100
• /
• 2006

통신해양기상위성의 전력계는 향상된 Eurostar 3000 버전에 바탕을 두고 있다. Eurostar 3000 전력계는 정상상태 또는 하나의 결함에서도 자율적으로 동작하며 높은 수준의 재구성 능력 및 유연성을 제공한다. 본 논문에서는 통신해양기상위성 전력계 예비설계 결과를 소개한다. 통신해양기상위성 전력계는 하나의 배터리, 태양전지어레이 윙, 전력공급기, 파이로 유닛 및 태양전지어레이 구동기 그리고 릴레이 및 퓨즈 브래킷 들로 구성된다. 통신해양기상위성 전력계는 3 kW의 버스 전력을 제공할 수 있다. 태양전지어레이는 2개의 태양전지판으로 구성된 전개할 수 있는 윙으로 구성된다. 태양전지는 GaAs/Ge 3중 접합 셀로 선정되었다. Li-ion 배터리는 10개의 직렬 연결된 셀 모듈로 구성되며 각 모듈은 셀 5개가 병렬로 연결된다. 전력공급기는 태양전지어레이 및 배터리와 함께 50 V로 완전 정류된 하나의 전력 버스를 생성한다. 전력 버스는 릴레이 및 퓨즈 브래킷 들에 의해 중앙 집중되어 보호되고 분배된다. 파이로 유닛은 점화 작동기 장치로 전력을 공급한다. 태양전지어레이는 자세제어계의 제어로 태양전지어레이 구동기에 의해 회전된다. 전력계의 제어 및 감시는, 특히 배터리, 전력공급기와 탑재 소프트웨어의 결합으로 수행된다.

• KIEE International Transactions on Power Engineering
• /
• 제5A권4호
• /
• pp.357-365
• /
• 2005

This research investigates the influences of distributed generations (DG), which are interconnected to the bus by the dedicated lines, on the overcurrent relays (OCR) of the neighboring distribution feeders and also proposes a novel method to reduce the negative effects on the feeder protection. Due to the grid connected DG, the entire short-circuit capacity of the distribution networks increases, which may raise the current of the distribution feeder during normal operations as well as fault conditions. In particular, during the switching period for loop operation, the current level of the distribution feeder can be larger than the pickup value for the fault of the feeder's OCR, thereby causing the OCR to perform a mal-operation. This paper proposes the adaptive setting algorithm for the OCR of the distribution feeders having the neighboring dedicated feeders for the DG to prevent the mal-operations of the OCR under normal conditions. The proposed method changes the pickup value of the OCR by adapting the power output of the DG monitored at the relaying point in the distribution network. We tested the proposed method with the actual distribution network model of the Hoenggye substation at the Korea Electric Power Co., which is composed of five feeders supplying the power to network loads and two dedicated feeders for the wind turbine generators. The simulation results demonstrate that the proposed adaptive protection method could enhance the conventional OCR of the distribution feeders with the neighboring dedicated lines for the DG.

• Journal of Information Science Theory and Practice
• /
• 제10권spc호
• /
• pp.56-65
• /
• 2022

Korea Institute of Science and Technology Information (KISTI) is a Worldwide LHC Computing Grid (WLCG) Tier-1 center mandated to preserve raw data produced from A Large Ion Collider Experiment (ALICE) experiment using the world's largest particle accelerator, the Large Hadron Collider (LHC) at European Organization for Nuclear Research (CERN). Physical medium used widely for long-term data preservation is tape, thanks to its reliability and least price per capacity compared to other media such as optical disk, hard disk, and solid-state disk. However, decreasing numbers of manufacturers for both tape drives and cartridges, and patent disputes among them escalated risk of market. As alternative to tape-based data preservation strategy, we proposed disk-only erasure-coded archival storage system, Custodial Disk Storage (CDS), powered by Exascale Open Storage (EOS), an open-source storage management software developed by CERN. CDS system consists of 18 high density Just-Bunch-Of-Disks (JBOD) enclosures attached to 9 servers through 12 Gbps Serial Attached SCSI (SAS) Host Bus Adapter (HBA) interfaces via multiple paths for redundancy and multiplexing. For data protection, we introduced Reed-Solomon (RS) (16, 4) Erasure Coding (EC) layout, where the number of data and parity blocks are 12 and 4 respectively, which gives the annual data loss probability equivalent to 5×10^-14. In this paper, we discuss CDS system design based on JBOD products, performance limitations, and data protection strategy accommodating EOS EC implementation. We present CDS operations for ALICE experiment and long-term power consumption measurement.

• 한국빅데이터학회지
• /
• 제7권2호
• /
• pp.75-90
• /
• 2022

코로나19 팬데믹에 따른 경제사회 환경 변화와 빅데이터 기술의 발달로 교통분석에 대한 요구가 다양화되고 있다. 특히 데이터 3법 개정에 따라 이종 데이터 간 가명정보 결합이 가능해져 다각적인 분석이 가능해졌다. 그러나 개인정보보호 강화로 모빌리티 빅데이터의 결합분석에는 데이터 협력, 비용대비 효과 등에 한계가 있어 새로운 분석방법론이 필요하다. 본 연구에서 제시하는 "모빌리티 빅데이터 가상결합 방법론"은 법제상의 제약 해소 및 다각적인 교통분석을 위한 것으로, 모바일 통신 기지국 데이터, 교통카드 데이터 등 다양한 모빌리티 관련 빅데이터를 간접적으로 결합하여 상세 분석을 수행하기 위한 방법론이다. 가상결합은 모바일 데이터를 바탕으로 특정 인원의 시간대별 위치를 파악할 수 있는 MCGM(Mobility Comprehensive Genetic Map)을 생성하여 패턴을 분석하고, 이를 교통카드데이터 등 교통관련 빅데이터와 결합시켜 분석하는 방법론으로 본 연구에서는 청주, 수도권 대상으로 가상결합 분석을 수행하여 활용가능성을 검증하였다.