• Title/Summary/Keyword: Burning times

Search Result 158, Processing Time 0.022 seconds

The Evaluation of Early Growth Pattern of Miscanthus sacchariflorus after Cutting and Burning in the Woopo Wetland (우포늪 물억새 (Miscanthus sacchariflorus) 군락에서 생장초기에 잘라주기와 태워주기에 따른 성장변화)

  • Kim, Gu-Yeon;Lee, Chan-Woo;Joo, Gea-Jae
    • Korean Journal of Ecology and Environment
    • /
    • v.37 no.2 s.107
    • /
    • pp.255-262
    • /
    • 2004
  • Growth patterns after the cutting and burning of Miscanthus sacchariflorus community were analyzed in the Woopo Wetland. Three replicates of 5 ${\times}$ 5 m plot of control, burning, and cutting treatments were established in April 2003 and changes of growth pattern were monitored by August 2003. In the control, burning, and cutting plots, a total of 7 families and 8 species, 14 families and 18 species, 6 families and 8species were observed respectively. Burning plot showed high diversity of flora. However, high diversity declined after July and all plots showed a similar species diversity. Vine plant, Humulus japonicus, dominated in the burning plots. Change of shoot density was highest in the early period in the burning plots (176/$m^2$) and shoot density in early May was almost double of the control and cutting plots. Toward to the end of active growth period (August), shoot density in cutting plot (170 ${\pm}\;7/m^2$)was higher than that of burning plots (141 ${\pm}\;9/m^2$). Shoot length of the cutting, burning, and control plot was 205 ${\pm}$ 15 cm, 190 ${\pm}$ 17 cm, and 187 ${\pm}$ 6 cm (n> 100) respectively. Above- ground biomass of cutting plots was higher than that of burning and control plots. Above- ground biomass of cutting plot was 1.6 times higher than the control while burning plot showed 1.4 times. This study indicted that cutting of Miscanthus sacchariflorus community increase shoot density development, length growth, and above- ground biomass.

Burning Rate Characteristics of Solid Propellant at Extremely High Pressure (초고압에서 고체 추진제의 연소속도 특성)

  • Sung, Hong-Gye;Yoo, Ji-Chang
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.10 no.3
    • /
    • pp.60-66
    • /
    • 2006
  • Notable are the burning rate characteristics of solid propellant burning at extremely high pressure(10000-20000 psia). The burning rate test using closed bomb shows the discontinuous increment around 4000 psia so that the exponent of burning rate(n) is almost double, from 0.4 to 0.8. The pressure-increasing rate of the test motor is about 300 times as high as that of the motor operating at the conventional pressure, less than 2000 psia, is, therefor the burning rate is augmented about 5-50 times. The performance prediction reflecting the pressure-change-rate effect are fairly comparable with the test data at various test conditions.

Comparison Study on Burning and Ignition Characteristics for Single Aluminum and Magnesium Particles (EDB에 의해 부양된 알루미늄과 마그네슘 단일 입자의 점화 및 연소 특성 비교 연구)

  • Lim, Ji-Hwan;Yoon, Woong-Sup
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2010.11a
    • /
    • pp.311-316
    • /
    • 2010
  • The ignition and the burning characteristics of aluminum and magnesium particles ($30-110{\mu}m$ in diameter) isolated due to electrodynamic levitation were experimentally investigated. The burning time, the ignition delay time, the flame temperature, and the flame diameter were measured. The thermal radiation intensity was measured using the photomultiplier tube and the combustion history was monitored by high-speed cinematography. Two-wavelength pyrometry measured the temperature of the burning particles. The burning times of aluminum particles were measured approximately 5 to 8 times longer than those of magnesium particles. Exponents of $D^n$-law, for the burning rate of magnesium and aluminum particles of diameters less than $110{\mu}m$, are found to be 0.6 and 1.5, respectively. The instant of aluminum ignition is clearly distinguished with the ignition delay time little less than 10 ms, however the burning history of magnesium particle exhibits no distinct instant of the ignition. The ignition delay time of magnesium particle (less than $110{\mu}m$) were approximately shown in the range from 50 to 200 ns. The flame temperatures of single metal particles are lower than the boiling point of the oxide. The nondimensional flame diameters for magnesium are decreased with increasing of the diameter. The nondimensional flame diameters for aluminum are not changed significantly.

  • PDF

Effect of acoustic wave on the evaporation/combustion of suspended droplet (음파가 고정액적의 증발/연소에 미치는 영향에 관한 연구)

  • Han, Jae-Seob;Kim, Seon-Jin;Kim, Yoo
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.6 no.3
    • /
    • pp.53-60
    • /
    • 2002
  • This paper presents the results of the experimental investigation on the effect of acoustic wave on the combustion of suspended A-1 jet fuel droplets in atmospheric pressure. Experimental results indicate that A-1 jet fuel droplet burning rate constants $k_c$ were independent of initial droplet size and the relative evaporation/burning-rate constant $k_{e'}k_c$(ratio of the acoustically disturbed evaporation/burning-rate constant to the undisturbed evaporation/burning-rate constant) increased remarkably 1.2~1.51times, 1.04~1.42times, for frequency below 100Hz, and sound pressure level above 80dB.

Combustion Characteristics Analysis of Methane-Air Homogeneous Mixture in a Constant Volume Combustion Chamber (정적연소기에서의 메탄-공기 균질혼합기의 연소특성 분석)

  • Lee, Suk-Young;Kim, Sang-Jin;Jeon, Chung-Hwan
    • Journal of the Korean Society of Combustion
    • /
    • v.13 no.3
    • /
    • pp.9-16
    • /
    • 2008
  • In this study, a cylindrical constant volume combustion chamber is used to investigate the flow and combustion characteristics of methane-air homogeneous mixture under various initial charge pressure, excess air ratios and ignition times. The flame and burning speed, mean gas speed are calculated by numerical analysis to analyze the combustion characteristics. It is found that the mean gas velocity during combustion has the maximum value around 300 ms and then decreased gradually on the condition of 10000 ms, and that the combustion duration is shorten and flame speed and burning velocity have the highest value under the conditions of an excess air ratio 1.1, an initial charge pressure of 0.2 MPa and an ignition time of 300 ms in the present study. And, the initial pressure and burning speed are in inverse proportion, so that it is in agreement with Strehlow who presented that the initial pressure and burning speed are in inverse proportion when the burning speed is under 50cm/s.

  • PDF

A Study on The Trend of Occurrence and The Use Possibility of Mass Burning of Solid Waste in Seoul (서울시 쓰레기의 배출추세와 쓰레기 소각열의 이용에 관한 연구)

  • Kim, Shin-Do
    • The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
    • /
    • v.15 no.1
    • /
    • pp.97-104
    • /
    • 1986
  • This is to supply the basic data for saving energy and the appropriate way of waste disposal. The amount of waste disposed and its heat after burning is guessed to get conclusions. 1. The amount of disposable waste in 1990 in Seoul area is expected to be 2.2kg per man/day, coal ashes (YONTAN) 0.7kg, non-coal ashes 1.5kg. 2. The amount of waste combustible and heat after burning will be increased, and it is useful when the waste has Less than $70\%$ of water. 3. The method to collect waste should be specially organized, because most of the waste collected In Korea Is wet. 4. As the heat emitted from mass burning is $4\times10^{12}kcal/y$ in 1985, it is considered to be in senses of energy saving and the rationnal way of waste disposal. 5. Special concern is needed because the environment contaminated will be polluted in result of burning.

  • PDF

Experimental Study on the Suppression of low Frequency Unstable Burning Occurred in a Gas Generator Using Bundle Cylindrical Grain (다발 원통형 그레인을 사용한 가스발생기의 저주파 연소불안정 소멸에 대한 실험적 연구)

  • Sung Hong-Gye;Byun Jong-Ryul
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.8 no.3
    • /
    • pp.10-16
    • /
    • 2004
  • Untypical unstable burning with very low frequency was observed at firing test of a gas generator using bundle cylindrical grain. The pressure unbalance between inside and outside of cylindrical grain brought such a low unstable burning. The grains were radially holed so that the high pressure gas inside of grain could quickly moved outward of gain, resulting dissipation of the pressure unbalance However too many holes were required to let the burning be stable for all operation regime from low to high temperature of grain and resultantly deteriorate the Progressive increase of gas amount produced by a gas generator. So another idea using grids located both sides of a bundle grain was applied to dissipate actively large vorticities enhanced by unbalance pressure distribution in a combustor. Finally stable burning with progressively increase of gas was established by application of 5${\times}$5 grid slightly away bundle grain to move bundle gain freely in case pressure unbalance were occurred inside of combustor.

A study on the laminar burning velocity according to the H2 content variation in a large range of equivalence ratio of syngas(H2/CO)-air premixed flames (넓은 당량비 구간에서 수소 함유량에 따른 합성가스(H2/CO)-공기 예혼합 화염의 층류연소속도에 관한 연구)

  • Jeong, Byeong-Gyu;Hwang, Cheol-Hong;Lee, Kee-Man
    • 한국연소학회:학술대회논문집
    • /
    • 2012.11a
    • /
    • pp.215-218
    • /
    • 2012
  • In this study, syngas laminar burning velocities with various hydrogen contents were studied using both experimental measurements and kinetic simulations. The laminar burning velocities were measured by the angle method of Bunsen flame configuration and the numerical calculations including burning velocities were made using CHEMKIN Package with USC-Mech II. A large range of syngas mixture compositions such as 10:90%, 25:75%, 50:50%, 75:25% and equivalence ratio from lean condition of 0.5 to rich condition of 5.0 have been conducted. The experimental results of burning velocity were in good agreement with previous other research data and numerical simulation. Also, it was shown that the experimental measurements of laminar burning velocity linearly increased with the increasing of $H_2$ content although the flame speed of hydrogen is faster about ten times than carbon monoxide. This phenomenon is attributed to the rapid production of the hydrogen related radicals such as H and OH at the early stage of combustion, which is confirmed the linear increasing of radical concentrations on kinetic simulation.

  • PDF

Combustion Characteristics of Methane-Air Mixture in a Constant Volume Combustion Chamber(1): Homogeneous Charge (정적연소기에서의 메탄-공기 혼합기의 연소특성(1) : 균질급기)

  • 최승환;전충환;장연준
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.11 no.3
    • /
    • pp.48-57
    • /
    • 2003
  • A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at spark plug and the combustion characteristics of homogeneous charge methane-air mixture under various initial pressure, excess air ratio and ignition times in quiescent mixture. The flow characteristics such as mean velocity and turbulence intensity was analyzed by hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer and flame propagation acquired by ICCD camera were used to investigate the effect of initial pressure, excess air ratio and ignition times on pressure, combustion duration, flame speed and burning velocity. Mean velocity and turbulence intensity had the maximum value at 200 or 300ms and then decreased to near 0 value gradually after 3 seconds. Combustion duration, flame speed and burning velocity were observed to be promoted with excess air ratio of 1.1, lower initial pressure and ignition time of 300ms.

The Relation of Three Burning Space And Nutrient & Defensive Qi (삼초(三焦)와 영위(營衛)의 상관성(相關性))

  • Mun, Seong-sik;Kang, Jung-Soo
    • Journal of Haehwa Medicine
    • /
    • v.9 no.1
    • /
    • pp.105-112
    • /
    • 2000
  • Three burning space concentrating mainly on the text of ${\ll}NeiChing{\gg}$, we got this conclusion by looking at a longitudial perspective of three burning space function, nutrient & defensive qi creation, movement and numbers. 1. Longitudial movement is the law of the universe, by looking at oriental medicine by the thought of heaven and man unity we can tell that longitudial movement concept is used to analyze the physiology of our body. And we can look at our body in a cubic movement suck as top and bottom, left and right, outside and inside, internal and external, upward and downward movement. 2. In Nei Ching the concept of three burning space is seperated in to four different types of three burning space which are three burning space as a fu, three burning space as a water metabolism and excretion organ, and three burning space by its position. 3. nutrient & defensive qi's movement in the channel is the same as the twelve regular channels movement in our body, nutrient qi circulates the yang part twenty five during the day and circulates the ying part twenty five times during the night. Since channel functions corresponds with the sun, moon, and the stars the ups and downs of nutrient & defensive qi's property varies with the difference of the periods. 4. By comparing nutrient & defensive qi's production and property with three burning space's positional property, we can see that three burning space's positional property comes out from the longitudial movement of nutrient & defensive qi.

  • PDF