• Journal of the Korean Society of Safety
• /
• v.7 no.4
• /
• pp.13-21
• /
• 1992

The purpose of this reserch is to suggest grinding temperature for high effect grinding and to clarify the sufficient grinding heat by experiment and theory(developed finite element program). Main results to be obtained are as follows : 1) The grinding temperature distribution by F. E. M is comparatively in good apreement with the experimental results. 2) The up cut grinding method of grinding methods is decreased burning effect. 3) Regardless of the table speed on the temperature distribution in grinding surface layer, cooling effect is about 6-8times when developed nozzle is used.

• Journal of the Speleological Society of Korea
• /
• no.76
• /
• pp.31-36
• /
• 2006

Self propagating High temperature Synthesised (SHS) ceramics have been widely used for various electronic applications. The investigation on SHS materials has been reported. The purposes of this study were as follows: fabricating the high temperature functional materials, and evaluating crystal structure and electrical properties. The regularities and peculiarities in SHS structures of high temperature materials as a result of the molecular interactions during burning process are considered.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.399-400
• /
• 2005

Self-propagating High-temperature Synthesised (SHS) ceramics have been widely used for various electronic applications. The investigation on SHS materials has been reported. The purposes of this study were as follows: fabricating the high-temperature functional materials, and evaluating crystal structure and electrical properties. The regularities and peculiarities in SHS structures of high-temperature materials as a result of the molecular interactions during burning process are considered.

• Journal of Ginseng Research
• /
• v.35 no.4
• /
• pp.449-456
• /
• 2011

Plant leaf cuticle is related to the prevention of moisture loss, transpiration, and diffusion of light reflection. The purpose of this study was to examine the morphological characteristics of ginseng leaves in ginseng plants resistant and susceptible to hightemperature injury (HTI) to be related with the leaf-burning. For the HTI resistant lines Yunpoong, high-temperature injury resistance (HTIR) 1, HTIR 2, and HTIR 3, and the HTI-susceptible line Chunpoong, the cuticle densities were 53.0%, 46.2%, 44.9%, 48.0%, and 17.0%; the adaxial leaf cuticle layers were 141.3, 119.7, 119.7, 159.4, and 85.0 nm in thickness; the abaxial leaf cuticle layers were 153.6, 165.8, 157.9, 199.6, and 119.4 nm in thickness; and the stomtal lengths were 21.7, 32.4, 29.4, 30.9, and $21.8{\mu}m$, respectively. All of these aspects suggest that HTI resistant lines have higher cuticle density, thickicker adaxial and abaxial leaf cuticle layers, and longer of stomta length than the HTI-susceptible line, protecting leaves from moisture loss and excessive transpiration under high temperatures to be resistant against the leaf-burning.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1303-1310
• /
• 2001

In order to be applicable to the combustion modelling of stratified charged combustion like that of - lean burn and GDI engine, the correlations of laminar burring velocities fur several hydrocarbon fuels and methanol are needed over a wide range of equivalence ratio, pressure and temperature. In this study, these correlations are modeled in the 1311owing form based on the experimental and Muller\`s modeling results for several fuels, where $\alpha$, ξ, and ξ are functions of pressure and temperature, $S_{L}$ =$\alpha$ exp[-ξ($\Phi$-$\Phi$$_{m}$)$^{2}$ -exp {-ζ($\Phi$-$\Phi$$_{m}$)}-ζ($\Phi$-$\Phi$$_{m}$)]. By using the results calculated by PREMIX code with Sloane\`s detailed chemical reaction mechanism for propane, it is verified that the coefficients of the abode modeling can be determined by considering laminar burning velocity data only in a range of equivalence ratio less than $\Phi$$_{m}$. Therefore, Muller\`s modeling results can be adopted leer modeling of the pressure and temperature dependency. Compared with the results of the existing Keck'and Gulder's models, those of the present one showed the good agreement of the recent experimental data, especially in the range of lean and rich sides.s.des.s.

• Journal of Biosystems Engineering
• /
• v.12 no.4
• /
• pp.31-43
• /
• 1987

This study was performed to develop a hot water boiler system with small scale automatic rice hull furnace for the multi-purpose use in the farm. For the experiment a prototype hot water boiler system with rice hull furnace was fabricated, which was equipped with automatic hull feeder, igniter and ash removal device. Optimum operational conditions of the prototype: system were analyzed. The results arc summarized as follows. 1. The temperature measured right above the burning surface should be higher than $500^{\circ}C$ combustion. 2. The top zone of the combustion chamber was the most suitable location of the thermocouple to pick up the control temperature for the automatic operation of the rice hull furnace. 3. The content of carbon monoxide in the flue gas was increased with the filling height of burning material but it was less than 0.3 percent in volume in this experiment. When the filling height was expressed as the ratio of rice hull feed rate to the volume of the combustion chamber above the burning surface, the optimum ratio was about $150kg/m^3-h$. 4. The combustion efficiency of the prototype was higher than 95 percent when the feed rate was 1.1 to 2.3 kg/h and moisture content of rice hull was 22.4 percent (w.b.) or less. 5. It was estimated that the optimum operational conditions of the system were 1.3 to 2.0 kg/h in feed rate, 70 to 100 percent in excess air and 500 to $510^{\circ}C$ in control temperature. 6. The efficiency of coil heal exchanger increased with a decrease in feed rate of rice hull. When the rice hull feed rates were 1.1, 1.7 and 2.3 kg/h, the efficiencies of coil heat exchanger were about 34, 30 and 25 percent and heat transfer rates were 5.7, 7.6 and 8.8 MJ/h, respectively. When the flat plate heat exchanger was used in addition to the coil heat exchanger, the efficiency of the heat exchanger system increased to 48 percent.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.2
• /
• pp.78-88
• /
• 2005

The combustion characteristics of End-Burning hybrid combustor using different types of injector system are numerically investigated to visualize the temperature fields in the combustion chamber The basic characteristics of combustion with different O/F ratio is also analyzed in order to capture the main behavior of diffusion flame inside the swirl induced hybrid combustion chamber It was found that the arrangement of oxidizer injectors give strong effect on the temperature field dominating mixing between fuel and oxidizer. The results show that among five different oxidizer injectors arrangement, the counter flow injector has the highest mixing efficiency. However, the observed high wall temperature presence near the oxidizer injectors remains to be solved.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.3
• /
• pp.10-16
• /
• 2004

Untypical unstable burning with very low frequency was observed at firing test of a gas generator using bundle cylindrical grain. The pressure unbalance between inside and outside of cylindrical grain brought such a low unstable burning. The grains were radially holed so that the high pressure gas inside of grain could quickly moved outward of gain, resulting dissipation of the pressure unbalance However too many holes were required to let the burning be stable for all operation regime from low to high temperature of grain and resultantly deteriorate the Progressive increase of gas amount produced by a gas generator. So another idea using grids located both sides of a bundle grain was applied to dissipate actively large vorticities enhanced by unbalance pressure distribution in a combustor. Finally stable burning with progressively increase of gas was established by application of 5${\times}$5 grid slightly away bundle grain to move bundle gain freely in case pressure unbalance were occurred inside of combustor.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.2
• /
• pp.25-32
• /
• 2000

Fire-resistant boom is one of the most important facilities in in situ homing of spilled oil. Thermal response of a fire-resistant boom to turning is experimentally investigated in this paper by using an electric furnace and a burning test facility. This test facility is composed of a test tank, a fire boom, a hood for inhaling smoke, an incinerator for burning up gases and thermocouples, etc. Thereby a systematic method of approach in small laboratory scale is developed to study the performance of a fire-resistant boom. Burning test is carried out for the fire boom model which has been developed through the present study. It is shown that the present fire boom model has capability to withstand the high temperature around 800℃ and high rate of heat flux on it due to homing. For more realistic experimental environments, larger dimensions in devices and longer time in experiments are recommended in near future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.4
• /
• pp.363-368
• /
• 2010

In the solid rocket propellant combustion, the dynamic phase change from solid to liquid to vapor occurs across the melt layer. During the surface burning, liquid and gas phases are mixed in the intermediate zone between the propellant and the flame to form micro scale bubbles. The known thickness of the melt layer is approximately 1 micron at $10^5$ Pa. In this paper, we present a model of the melt layer structure and the dynamic motion of the melt front derived from the classical phase field theory. The model results show that the melt layer grows and propagates uniformly according to exp(-1/$T_s$) with $T_s$ being the propellant surface temperature.