• 한국대기환경학회지
• /
• 제27권6호
• /
• pp.641-649
• /
• 2011

The aim of this study is to understand the characteristics of exhausting particulate matters (PM) and to control emitted PM from meat cooking restaurants. We found that $PM_{2.5}$, $PM_{5.0}$ occupy 69.2% and 98.6% of total PM from pork cooking, respectively. Therefore, we can see that it is not easy to remove PM generated from a pork cooking process. The collection efficiencies of various control devices, which are a condensing scrubber, a cyclone, an impactor, an oil filter and an electrostatic precipitator (ESP), were measured and compared. ESP had the highest collection efficiency (88.6%) and condensing scrubber had the lowest one (68.0%). However, the system recovering property should be considered to choose a control device because PM from meat cooking process are extremely stickiness. Therefore, we can recommend that ESP following an impactor or a cyclone is the best combination to remove PM generated from meat cooking restaurants.

• 청정기술
• /
• 제10권2호
• /
• pp.111-120
• /
• 2004

피혁 탈모 공정 폐수의 질소감소 및 황화물 감소, COD, BOD의 오염부하를 감소할수 있는 탈모공정 처리용 환경 친화적 피혁용 약품을 제조 하였다. 본 연구에서 개발한 Hair saving 공정처리제는 Urea, Mercaptan을 기본 물질로 하는 Liming agent와 Unhairing assist 제품을 제조하였다. Hair saving 공정에 처리한 결과 기존의 Hair burning 방법에 비해 회수된 모의 양이 약 2배 정도 증가하였다. 혁의 품질 및 생산성 평가의 지표인 수율을 좌우하는 Grain상태, 수축현상(Drawing)이 개선이 가능하였다. Wet Blue 및 완성원단에서의 인장, 인열 등의 물성과 Softness및 Touch 등의 가죽 본래의 천연감도 증대되는 효과가 있었다. 또한, 탈모공정후 배출 배수에서의 COD, T-N 농도가 약 50% 이상 감소 가능한 것을 확인 가능하였다.

• 한국추진공학회지
• /
• 제22권3호
• /
• pp.40-45
• /
• 2018

고체 추진기관의 불량 발생 요인 중 가장 큰 부분을 차지하고 있는 추진제 기공 및 크랙은 추진제의 점도와 물성이 큰 영향을 미친다. 본 연구는 혼합형 고체 추진제의 한 종류인 나이트레이트 에스터 폴리이서(Nitrate Ester Polyester; NEPE)계열의 추진제에서 주로 사용되는 RDX의 입도 및 혼합 함량에 따른 추진제 점도, 기계적 물성 및 연소특성 변화를 관찰하였다. RDX 입도와 혼합 함량에 따라 미경화 추진제의 경시적 점도가 크게 변화가 되었으며, 이에 따른 추진제 물성 또한 변화가 있었다. 추진제의 낮은 점도와 안정된 기계적 물성을 동시에 고려할 때, RDX의 입도 및 혼합 함량은 NEPE계 추진제의 주요 인자로 확인할 수 있다.

• Composites Research
• /
• 제30권5호
• /
• pp.303-309
• /
• 2017

Organo-montmorillonite (OMMT) has attracted much attention for fiber-reinforced polymer composites as a filler material due to high aspect ratio and low charge density. The present study focused on the fabrication of nanocomposites using Vinyl ester and Jute fabric as matrix and reinforcement respectively. The OMMT was uniformly dispersed in vinyl ester resin at 1, 2 and 3 wt%, loading through high speed mechanical stirrer at room temperature and further nanocomposites were manufactured through vacuum assisted resin infusion (VARI) technique. Effects of OMMT on the mechanical properties of vinyl ester/Jute composites were carefully investigated through tensile, bending and Izod impact tests, which revealed significant improvement in mechanical properties. The morphology of the nanocomposites after tensile test was investigated by SEM which affirmed that OMMT filled nanocomposites has improved interactions with the host matrix than the pure composites. Based on the nature and flame retardancy mechanism, the OMMT slightly improved the flammability property which was clearly explained by horizontal burning test.

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.874-878
• /
• 1994

To increase the anti-oxidation and anti-wear properties of graphite for the propellant-burning environment, SiC, Pt and Al2O3 multi-layer coatings were conducted succesisvely and the optimum condition was researched. The SiC layer was produced by pack cementation and SiC layer in thickness of 30 ${\mu}{\textrm}{m}$ coating was produced after coating for 6 hours. Pt layer was coated by sputtering, and the Al2O3 layer was coated by reactive sputtering. the thickness of Pt layer and Al2O3 layer was less than one-tenth of that of SiC layer. The pack coated specimens and multi-layer coated specimens were made using above conditions and test-fired. The test result showed that the wear rate of SiC layer is approximately 1/10 compared to that of uncoated graphite.

• 한국안전학회지
• /
• 제12권3호
• /
• pp.173-178
• /
• 1997

본질적인 난연 및 내열성의 PQXS, PIQS, PQS 3종류의 폴리머를 2,3-dichloroquinoxaline, 1,3-dichloroisoquinoline, 4,7-dichloroquinoline을 각각 출발 물질로 하여 합성하였다. 이들을 FT-IR, UV/Vis 분광분석, DTA, 원소분석 등에 따라 특성분석을 행하였다. 이들 폴리머소재는 내열 및 난연특성 시험에서 녹는점 기준 $350^{\circ}C$ 이상의 높은 내열성과 LOI값 기준으로 41~42의 높은 수치의 난연특성을 나타내었으며 또한 수직연소시험에서 UL 94 V-0 등급의 높은 난연특성을 나타내었다.

• 한국연소학회지
• /
• 제2권1호
• /
• pp.1-8
• /
• 1997

Premixed combustion within porous ceramic media is numerically studied to understand burning characteristics and to find best configurations for burner implementations. Among many parameters, critical to burner performance, flame location and extinction coefficient are selected as major parameters for this study. The flame structure and burner performance with respect to these two parameters are observed. In the study, it is found that the location of flame is the most important in porous burner operation since it affects the rate of heat transfer and flame structure. Stability of the flame within the porous ceramic burner is discussed with respect to the flame location. It is found that to obtain high radiative output, the flame should be located downstream section of the burner. But the flame is to be unstable at most of downstream section except near the exit plane. To overcome this problem, new porous ceramic burner, using different ceramic properties in one burner instead of single property ceramic, is made and tested. With a combination of ceramics of high extinction coefficient at upstream and another material of low extinction coefficient at downstream of the burner, the flame can be stabilized at wider region of the burner with higher radiative output compared to the original burner configuration.

• 유통과학연구
• /
• 제18권9호
• /
• pp.67-75
• /
• 2020

Purpose: The purpose of this study is to enhance sales promotion efficiency for using solid refuse fuel facilities. Renewable energy technology using Solid Refuse Fuel (SRF) is an economic efficiency technology that recovers waste by burning various wastes. A survey on the pollutants discharged from the solid fuels facilities was investigated so that the SRF facilities could be expanded, distributed and reflected in the policy. Research design, data, and methodology: In this study, 9 business sites using SRF and Bio-SRF as main raw materials were investigated for 2 years. The characteristics of target business sites such as the type of fuel used, combustion method, combustion temperature, daily fuel consumption and environmental prevention facilities were studied. Results: The average pollution & ammonia concentration of Bio-SRF facilities was found to be 88.15% higher than that of SRF facilities. But the average acetaldehyde concentration of SRF facilities was found to be 88.15% higher than that of Bio-SRF facilities. Conclusions: The main issue is how much electric power generation using combustible materials affects air pollution. The waste recycling law provides the standard value according to the fuel property, but there is a considerable gap with the mixed fuel. Therefore, for efficient utilization of facilities using solid fuel products, additional research is needed to improve the distribution structure of exhaust pollutants is needed.

• 한국화재소방학회논문지
• /
• 제12권4호
• /
• pp.41-49
• /
• 1998

본 연구에서는 FRP용 모재수지로 사용되는 이소프탈산계 불포화폴리에스터 수지의 난 연제 첨가에 따른 연소특성의 변화에 대하여 알아보았다. 난연제로 수산화 알루미늄 ( (AHOHh), 삼산화 안티몬(Sb203), 알루미나 분말을 사용하였다. 난연제 첨가량의 증가에 따라 수지의 경도값이 감소하였다. 수산화 알루미늄의 첨가량이 증가할수록 연소속도가 감소되었다. 삼산화 안티몬을 추가로 소량(2.5 phr) 첨가할 때 잔유물의 생성량(char yield : : 31%)이 증가되고, 연소특성이 더욱 개선되었다. 결론적으로, 난연처리를 하지 않은 수지 의 경우 다량의 화염과 연기를 발생하며 격렬히 연소하였지만 난연처리하였을 경우 자기 소화성을 가지며 화염과 연기의 양이 상당히 줄어들게 됨을 알 수 있었다.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1691-1701
• /
• 1998

Fly ash produced in coal combustion is a fine-grained material consisting mostly of spherical, glassy, and porous particles. A study on the formation mechanism of the fly ash from coal particles in the pulverized coal power plant is investigated with a physical, morphological, and chemical characteristic analysis of fly ash collected from the Samchonpo power plant. This study may contribute to the data base of domestic fly ash, the improvement of combustion efficiency, fouling phenomena and ash collection in the electrostatic precipitator. The physical property of fly ash is determined using a particle counter for the measurement of ash size distribution. Morphological characteristic of fly ash is performed using a scanning electron micrograph. The chemical components of fly ash are determined using an inductively coupled plasma emission spectrometry(ICP). The distribution of fly ash size was bi-modal and ranged from 12 to $19{\mu}m$ in mass median diameter. Exposure conditions of flue gas temperature and duration within the combustion zone of the boiler played an important role on the morphological properties of the fly ash such as shape, particle size and chemical components. The evolution of ash formation during pulverized coal combustion has revealed three major mechanisms by large particle formation due to break-up process, gas to particle conversion and growth by coagulation and agglomeration.