• Journal of Acupuncture Research
• /
• 제39권1호
• /
• pp.29-35
• /
• 2022

Background: Electronic moxibustion has the advantage of temperature control and maintenance, and overcomes the limitations of the existing moxibustion process without the use of the combustion process. However, as the application of electronic moxibustion in clinical practice has increased, safety issues are emerging. Methods: Clinical cases of electronic moxibustion treatment for knee osteoarthritis where burns occurred were collected. In addition, adverse events reported in clinical studies using electronic moxibustion for patients with knee osteoarthritis were collected from studies retrieved from Korean and international databases. Results: There were 3 cases of superficial 2^nd degree burns retrospectively collected through chart reviews. Among the selected 5 studies for literature review, 2 studies reported adverse events which were burns milder than those reported in these 3 cases in this retrospective case review. Conclusion: Since the risk of superficial 2^nd degree burn was discovered in the cases reviewed, further research on safe electronic moxibustion treatment is required without compromising the effectiveness of moxibustion.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.36-37
• /
• 2013

This paper presents high voltage operation sensing boost converter with high side current. Proposed topology has three functions which are high voltage driving, high side current sensing and low voltage boost controller. High voltage gate driving block provides LED dimming function and switch function such as a load switch of LED driver. To protect abnormal fault and burn out of LED bar, it is applied high side current sensing method with high voltage driver. This proposed configuration of boost converter shows the effectiveness capability to LED driver through measurement results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1985년도 하계학술회의논문집
• /
• pp.55-60
• /
• 1985

A state-space model of a burn through point control system of an industrial sintering process is derived. The model is then used in designing a self-tuning controller which consists of the receding horizon control law and a least-squares prediction algorithm. By applying this adaptive controller to POSCO sintering process IV, satisfactory expermental results have been obtained. Some of these practical results are presented in this paper.

• 에너지공학
• /
• 제20권3호
• /
• pp.191-199
• /
• 2011

본 연구에서는 Drop Tube Furnace(DTF)를 이용한 $O_2/N_2$, $O_2/CO_2$ 조건에서 산소 농도(12, 21, 31%)에 따른 아역청탄 입자의 연소특성 및 질소산화물 배출특성에 관한 실험과 수치해석을 수행하였다. $O_2/N_2$, $O_2/CO_2$ 조건에서 산소 농도가 증가함에 따라 촤 연소율이 증가하였고 $O_2/CO_2$ 조건하에서 이산화탄소 경계층에서 석탄입자 표면으로의 산소 확산계수가 낮아지기 때문에 촤 연소율이 감소하였다. 산소 농도가 증가함에 따라 배출되는 NO의 농도는 증가하지만 완전 연소 조건인 31%의 산소 농도에서는 오히려 NO의 농도가 감소하였다. 반면, NO 배출 지수는 산소가 증가함에 따라 점차 감소하였다. $O_2/CO_2$ 조건에서 NO의 농도는 Thermal NO의 결여로 인해 $O_2/N_2$ 조건보다 작게 나타났다.

• Child Health Nursing Research
• /
• 제4권2호
• /
• pp.207-220
• /
• 1998

The purpose of this study was to build a substantive theory about the experience of the maternal uncertainty in childhood chronic illness. The qualitative research method used was grounded theory. The interviewees were 12 mothers who have cared for a child who had chronic illness. The data were collected through in-depth interviews with audiotape recording done by the investigator over a period of nine months. The data were analyzed simutaneously by a constant comparative method in which new data were continuously coded into categories and properties according to Strauss and Corbin's methodology. The 34 concepts were identified as a result of analyzing the grounded data. Ten categories emerged from the analysis. The categories were lack of clarity, unpredictability, unfamiliarity, negative change, anxiety, devotion normalization and burn-out. Causal conditions included : lack of clarity, unpredictability, unfamiliarity and change ; central phenomena : anxiety, being perplexed ; context. seriousness of illness, support ; intervening condition : belief action/interaction strategies devotion, overprotection ; consequences : normalization, burn-out. These categories were synthesized into the core concept-anxiety. The process of experiencing uncertainty was 1) Entering the world of uncertainty, 2) Struggling in the tunnel of uncertainty, 3) Reconstruction of the situation of uncertainty. Four hypotheses were derived from the analysis : (1) The higher the lack of clarity, unpredictability, unfamiliaity, change, the higher the level of uncertainty (2) The more serious the illness and the less the support, the higher the level of uncertainty. (3) The positive believes will influence the devoted care and normalization of the family life. Through this substantive theory, pediatric nurses can understand the process of experiencing maternal uncertainty in childhood chronic illness. Further research to build substantive theories to explain other uncertainties may contribute to a formal theory of how normalization is achieved in the family with chronically ill child.

• 융합정보논문지
• /
• 제10권3호
• /
• pp.16-21
• /
• 2020

본 논문은 저 측엽 안테나를 사용하는 LPI(Low Probability Interceptor)레이다를 재밍하는 원격지원 재머의 특성에 대하여 기술한다. LPI 레이다는 재밍 영향을 줄이기 위해서 송수신 안테나의 측엽을 감소시킨다. 레이다는 재머가 표적과 같은 위치에 있는 자체보호 재머에 대해서는 재밍 효과를 쉽게 예측할 수 있으나, 표적과 다른 위치에서 재밍하는 원격지원 재머에 대해서는 재밍 효과를 예측하기가 어렵다. 본 논문에서는 LPI 레이다의 측엽을 재밍하는 원격지원 재머의 재밍 효과를 신호재밍비(SJR)와 재밍 유효 한계거리를 사용하여 분석하였다. 또한 안테나의 측엽이 -30dB 이하인 경우에는 재밍 효과가 미약하여, 안테나 주엽에 대한 원격지원 재밍 방법을 제안하고 재밍 효과를 분석하였다. 본 연구는 항공기용 원격지원 재머 설계 및 운용에 유용하게 사용될 것으로 판단된다.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.111-119
• /
• 2011

This study was designed to provide basic data applicable to fire investigation through consideration of combustion products and propose vulnerability of combustibles through analysis of $CO_2$ emission. In order to achieve these research objectives, characteristics of combustion products such as smoke release rate of each part(raw leaves, branches and barks), $CO_2$ emission and ash production were considered targeting on 6 oak species(Quercus variabilis Blume, Quercus aliena Blume, Quercus serrata, Quercus mongolica Fisch, Quercus dentata Sapling and Quercus acutissima) using cone calorimeter and smoke density tester. As a result, it was found that raw leaves release smoke more relatively than branches and barks, when they burn, and that Quercus variabilis Blume has the highest smoke density. Also, Quercus acutissima released CO and $CO_2$ which are respectively, 6.67 times and 1.43 times more than Quercus variabilis Blume with low $CO_2$ emission. In addition, branches released CO and $CO_2$ more relatively. There was a big difference in ash production among raw leaves(3.1 g), branches(10.5 g) and barks(16.43 g). It was identified that Quercus serrata produces ashes which are nearly 9.95 times more than Quercus variabilis Blume. It demonstrates that Quercus serrata contains relatively higher minerals and that Quercus variabilis Blume can leave lots of traces like stain and carbonization, as it releases smoke a lot and it's difficult to predict visibility, when a forest fire breaks out in its community area. It is also considered that smoke particles containing oil in the air leave strain on the surface of a tree, and that CO and $CO_2$ emission increases, when crown fire to burn branches breaks out.

• 품질경영학회지
• /
• 제25권3호
• /
• pp.96-107
• /
• 1997

The recent stream to reliability prediction is that it is totally inclusive in depth to consider even the operating and environmental condition at the level of finished goods as well as component itselves. In this study, firstly we present the reliability prediction methods by entire failure rate model which failure rate at the system level is added to the failure rate model at the component level. Secondly we build up the improved bases of reliability demonstration through a, pp.ication of Kaplan-Meier, Cumulative hazard, Johnson's methods as non-parametric and Maximum Likelihood Estimator under exponential & Weibull distribution as parametric. And also present the methods of curve fitting to piecewise failure rate under Weibull distribution, PRST (Probability Ratio Sequential Test), curve fitting to S-shaped reliability growth curve, computer programs of each methods. Lastly we show the practical for determination of optimal burn-in time as a method of reliability enhancement, and also verify the practical usefulness of the above study through the a, pp.ication of failure and test data during 1 year.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.7-12
• /
• 2003

Mixture formation in the cylinder of a lean bum engine has been observed by Laser Induced Fluorescence technique. XeCl laser (308nm) was used to produce a laser sheet. 3-pentanone has been added to iso-octane fuel to produce fluorescence, the intensity of which is proportional to the concentration of the fuel. The laser sheet was introduced through the piston window and the fuel distribution in the vertical plane was observed through a side window. Comparison has been made for the cases of selected fuel injection timing as 0, 360, 405, and 450 CA. For the case of 0 and 360 CA injection, uniform fuel distribution in the combustion chamber has been obtained at the ignition time which is favorable for the high load mode. And the late injection cases, 405 and 450 CA, revealed the stratified formation of rich mixture around the spark plug. That extends the lean misfire limit and reduces cyclic variation in the low load mode.

• 한국콘텐츠학회논문지
• /
• 제19권4호
• /
• pp.621-637
• /
• 2019

본 연구에서는 온라인쇼핑몰 콜센터 상담사의 감정노동이 고객지향성에 미치는 영향을 검증하고 직무소진의 매개효과를 검증하였다. 연구대상은 온라인쇼핑몰을 운영하는 4개 회사의 콜센터 상담사를 대상으로 하였으며 271부를 최종 자료 분석에 사용하였고 연구결과는 다음과 같다. 첫째, 감정노동의 하위요소인 내면행동은 고객지향성에 유의미한 정(+)의 영향을 주는 것으로 나타났다. 둘째, 감정노동의 내면행동은 비인격화와 개인성취감 저하에 부(-)의 영향을 주는 것으로 나타났으며, 표면행동은 감정고갈과 비인격화에 정(+)의 영향을 주는 것으로 나타났다. 셋째, 감정노동의 내면행동은 직무소진의 하위요인인 비인격화와 개인성취감 저하를 경유하여 고객지향성을 높이는 것으로 나타났으며 표면행동은 비인격화에 의해 매개되어 고객지향성을 낮추는 것으로 나타났다. 본 연구의 결과를 통해 고객지향성의 제고를 위해서는 내면행동은 높이고 직무소진을 낮출 필요가 있음을 확인하였다. 또한 직무소진의 역할과 매개효과를 검증하였다는 데에 그 의의가 있다.