• 대한두개안면성형외과학회지
• /
• 제21권4호
• /
• pp.264-267
• /
• 2020

Rhinophyma is a painless benign tumor of the skin of the nose. It is the most severe form of rosacea. Rhinophyma is particularly rare among Asians. It can be treated with surgical resection using various methods, including scalpel excision, dermabrasion, cryosurgery, argon laser, carbon dioxide laser, and electrocautery. However, the gold standard treatment of rhinophyma remains unknown. In the present case, we debulked a giant rhinophyma with a scalpel and contoured it using a bur. Along with a relevant literature review, we present a case of rhinophyma in an Asian patient who was treated at no additional cost using a bur widely used in general plastic surgery.

• 대한치과기공학회지
• /
• 제32권2호
• /
• pp.57-63
• /
• 2010

Purpose : This study aimed to find out the effects of treatments on the surface of Zirconia. Methods : To this end, we selected six treatments that have been used widely: steam cleaning, 2bar & 6bar sand blasting, grinding by green stone point, grinding by diamond bur, and grinding by diamond bur with water spray. Results : The results of our study showed that monoclinic rate increased from all six treatments. Monoclinic rate varied by treatments, ranged from 0.6% (steam cleaning) to 6.5% (6bar sand blasting). These values from all six treatments were below ISO 13356 standard, which is 25%. Also, we found that two treatments (green stone point and diamond bur) increased roughness of surface of Zirconia. Conclusion : This study concluded that phase changes of Zirconia were not significant by using six treatments we employed.

• 한국염색가공학회지
• /
• 제12권5호
• /
• pp.280-287
• /
• 2000

For thousands of years, dyes were obtained from natural sources, such as plants and animals. Although synthetic dyes have replaced many natural dyes for commercial use but natural dyes with their fascinating color are still used extensively by some people. To investigate the dyeing properties of chestnut bur, which is most widely found in our country, some experiments were performed under the several dyeing conditions with silk and cotton fabrics. It was found that $\lambda_{max}$ of chestnut but extract was 410nm and the color of the fabric dyed is Yellow Red. The K/S value of silk and cotton fabrics increased when the dyeing temperature was higher than $60^\circ{C}$ and the dyeing time was more than 30 minutes. Optimal dyeing pH was between 5 and 6, and repetition of dyeing increased K/S value of the sample fabrics. K/S value of silk fabric dyed with chestnut bur extract was higher than that of cotton. Post-mordanting method showed higher color yield compared with pre-mordanting, and higher temperature and increased time in mordanting increased the dye-uptake.

• 대한소아치과학회지
• /
• 제35권4호
• /
• pp.692-699
• /
• 2008

본 연구의 목적은 표면처리가 기존의 레진과 새로운 레진 사이의 전단결합강도에 미치는 영향을 평가하는 것이다. 준비된 레진 시편을 6군으로 임의로 배분하여 각각의 표면처리를 한 후 수리용 레진을 축조하였다. 일주일간 보관 후 전단결합강도 를 측정하였고 일원분산 분석법으로 통계처리하여 다음과 같은 결과를 얻었다. 1. 3군과 4군(air abrasion)은 1군(산부식)에 비해 전단결합강도가 유의하게 높게 나타났다(p<0.05). 5군과 6군(diamond bur)은 1군(산부식)에 비해 높은 전단결합강도를 나타냈으나 통계적으로 유의하지 않았다(p>0.05). 2. 2군(자가부식 접착제)은 1군(산부식)에 비해 전단결합강도가 낮게 나타났으나 유의한 차이는 없었다(p>0.05). 3. 3군(air abrasion)과 4군(air abrasion+산부식)에서 전단결합강도의 차이는 유의하지 않았다(p>0.05). 4. 5군(diamond bur)과 6군(diamond bur+산부식)에서 전단결합강도의 차이는 유의하지 않았다(p>0.05). 결론적으로, 복합레진의 수리 시 air abrasion으로 표면처리를 했을 때의 결합강도가 가장 높았고, 산부식 방법과 처리여 부는 수리강도에 유의한 영향을 미치지 않았다.

• 출판저널
• /
• 통권199호
• /
• pp.7-7
• /
• 1996

• 출판저널
• /
• 통권206호
• /
• pp.13-13
• /
• 1997

• 한국조경학회지
• /
• 제32권3호
• /
• pp.43-50
• /
• 2004

This study looked into the water quality improvement effect of reed (Phragmites communis), bur reed (Sparaganium stoloniferum), Alisma canaliculatum, and Hydrocharis dubia in order to develop native hydrophytes suitable to natural-type wetlands for ecological restoration. The result confirms that the concentration of wastewater was lowered in most plants indicating a possibility in wastewater treatment. Among four species, reed (Phragmites communis) and bur reed (Sparaganium stoloniferum) were most effective in removing a majority of contaminants. Considering that reed (Phragmites communis) is a species that has been used most often among hydrophytes, bur reed (Sparaganium stoloniferum), which is a native species in Korea, showed equivalent level of outstanding effect. In the physiological and growing activity and its relations to water quality improvement effect, each species appeared differently. Reed (Phragmites communis) and bur reed (Sparaganium stoloniferum) were best also in physiological and growing activity. In the case of Hydrocharis dubia, growth was strong in polluted water environment but its physiological activity was poor, indicating that it was under stress. The growth and physiological activity of Alisma canaliculatum were also poor, indicating that it too is being stressed. However, measuring organic contents in the plants of each species shows that the organic contents of Alisma canaliculatum was high. Alisma canaliculatum is a species effective in removing pollutants in water, although it is under stress. A unique phenomenon in removing water pollution with plants is that each species removed different pollutants. In the case of Alisma canaliculatum, which was relatively poor in removing pollution, it was remarkable in reducing nitrogen and phosphorus. Hydrocharis dubia was also effective in eliminating floating matter.

• The Journal of Advanced Prosthodontics
• /
• 제12권5호
• /
• pp.291-298
• /
• 2020

PURPOSE. The aim of this study is to evaluate the influence of repeated surface treatments on wettability and surface roughness for zirconia surface and bond strength of zirconia-based ceramics to resin cement. MATERIALS AND METHODS. Seventy blocks (10 × 10 × 3 mm) of zirconia-based ceramics were fabricated and divided into two groups according to the surface treatments: (A) 110 ㎛ Al₂O₃ airborne-particle abrasion and (R) 110 ㎛ silica modified Al₂O₃ airborne-particle abrasion. At stage 2, each group was subdivided into 5 groups according to the surface retreatments: (a) 110 ㎛ Al₂O₃ airborne-particle abrasion, (r) 110 ㎛ silica modified Al₂O₃ airborne-particle abrasion, (D) diamond bur, (Da) diamond bur + 110 ㎛ Al₂O₃ airborne-particle abrasion, and (Dr) diamond bur + 110 ㎛ silica modified Al₂O₃ airborne-particle abrasion. Cylinders of self-adhesive resin cement were cemented onto each treated ceramic surface and subjected to micro-shear bond strength test. Additional specimens were prepared for roughness and wettability analyses. The data were subjected to t-test and One-way ANOVA followed by Tukey's post hoc test (α=.05). RESULTS. At stage 1, group R presented higher bond strength values than group A (P=.000). There was a statistically significant increase of bond strength at stage 2 for group A (P=.003). The diamond bur influenced the surface roughness, increasing the values (P=.023). Group R provided better wettability. Regardless of the applied surface treatment, most of failures were adhesive. CONCLUSION. The combination of application and reapplication of Rocatec Plus showed the best results of bond strength. Surface retreatment and recementation might be an indicated clinical strategy.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.513-533
• /
• 1994

The smooth surface after polishing of composite resin contributes to the patient's comfort, and appearance and longevity of the restoration. This study was performed for the quantitative analysis of the effects of the various finishing and polishing instruments on the surface roughness and reflectivity of the microfill, and hybrid composite resins. Cylindrical specimens 2mm thick and 10mm in diameter of Silux Plus, Durafill VS ; Z100, Prisma TPH, Brilliant, and Herculite XR composite resin were polymerized under the matrix strip. 18 specimens for each composite resin materials were divided into 6 groups ; 5 experimental groups were abraded with # 600 sand paper to remove resin-rich layer, except control. Thereafter, using diamond bur(Mani Dia-Burs), carbide bur(E. T. carbide set 4159), rubber point(Composite polishing kit), aluminum-oxide disk(Sof-Lex disk), polishing paste(Enhance system) ; each specimen was polished to its best achievable surface according to manufacturer's directions. Final polished surfaces were evaluated for the surface roughness with profilometer(${\alpha}$-step 200, Tencor instruments, USA) and for the reflectivity with image analyser(Omniment Image Analyser, Buehler, USA). The results were as follows. 1. Polishing paste or aluminum-oxide disk finish in the microfill, and hybrid composite resins was as smooth as matrix strip finish on the surface roughness test. 2. Polishing paste or aluminum-oxide disk finish in the microfill ; polishing paste finish in the hybrid composite resins was as reflective as matrix strip finish on the refectivity test. 3. For the polishing paste, there were no significant differences between the composite resin materials on the surface roughness and refectivity tests. 4. For the aluminum-oxide disk, the best result was obtained with the microfill composite resin on the surface roughness and reflectivity test. 5. Diamond bur, carbide bur, and rubber point were inappropriate for the final polishing instruments.

• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.536-545
• /
• 1997

본 연구의 목적은 초음파를 이용하여 치근단역충전와동을 형성하는 경우 와동 내벽의 정화도 및 형태를 평가하기 위함이다. 발거된 상악 중절치 20개를 대상으로 근관충전 후 치근단 3 mm를 치아 장축에 직각되게 절단 제거한 다음, 저속의 round bur를 이용한 군을 대조군으로 하고 제2 및 제6 의 출력 단계의 초음파를 이용한 군을 실험군으로 하여 치근단 역충전와동을 형성하고 주사전자현미경 하에서 근관 잔사 및 도말층의 분포와 와벽형태를 검사하여 다음과 같은 결과를 얻었다. 제2 및 제6의 출력 단계의 초음파 기구로 형성한 역충전와동에서는 저속 round bur로 형성한 와동에 비해 도말층의 분포는 적은 것으로 나타났고 (p<0.01), 근관 잔사의 량에는 유의한 차이가 나타나지 않았다(p>0.05). 저속 round bur로 형성된 와동은 비교적 평활한 와벽을 보인 반면, 초음파로 형성된 와동에서는 계단식의 층을 보이는 와벽의 양상을 나타내었다.