• Journal of Periodontal and Implant Science
• /
• v.35 no.4
• /
• pp.949-959
• /
• 2005

이 연구는 임플란트를 식립하기를 원하는 전신건강상태가 양호하며 구강위생상태가 좋은 14명 환자(남자:8명, 여자:6명, 평균나이 : 44세)의 20개의 발치와 내에 흡수성 차폐막(BioMesh. Sam Yang Corporation, Korea)과 함께 탈회냉동 건조동종 골(dem-ineralized freezedried bone allografts, $250-500{\mu}m$. Pacific Coast Tissue Bank, U.S.A.)과 이종골(Bovine-Bone, Bio-Oss 0.25-1.0 mm, Geistlich, Biomaterials and Osteohealth, Switzerland)을 1:1(부피)로 혼합하여 이식한 후 그 치유양상을 관찰하고자 조직학적 및 면역조직화학적으로 평가하였다. 이직재가 탈락되는 것을 방지하기 위하여 발치한 후 1개윌이 경과된 후에 이식재와 차폐막을 위치시켰다. 표본제작을 위하여 이식술을 시행한 지 약 6개윌 후에 임플란트를 식립하기 직전 식립부위에서 trephine bur로 골을 채취하였는데, 20증례 중 7증례에서 임플란트를 식립하기 전에 차폐막이 노출되었다. 차폐막이 노출되지 않은 것을 대조군으로, 노출된 것을 실험군으로 설정하였다. 조직학적인 관찰을 위하여 통상적인 방법에 따라 탈회 표본을 제작하였고, alkaline phosphotase(ALP)틀 이용하여 면역조직화학적 염색을 시행한 후 골 형성 상태를 평가하여 다음과 같은 결과를 얻었다. 본 연구에서는 발치와내에서 골유도재생술 후 나타나는 치유 형태를 5가지 형태로 분류할 수 있었다. Type I, II와 III는 새로운 골 형성을 나타내지 않았고, 면역조직화학적 검사 시 ALP 음성 소견을 나타내었다. Type V는 새로운 골 형성과 ALP 양성 소견을 나타내었으나 염증, 괴사, 결합조직의 증식 등은 없었다. Type IV와 Type V의 차이는 결합조직의 증식여부로 구분되었다. 막이 노출되지않은 증례들 중 7 증례에서는 Type V의 치유 형태를, 2증례에서는 Type IV의 치유 형태를 나타내었다. 막이 노출되었던 증례에서는 Type I, II, III의 다양한 치유 형태를 나타내었다. 본 연구결과, 발치와 내에 골유도재생술을 시행한 후 차폐막의 노출 여부가 신생골 형성에 중요한 영향을 미칠 것으로 사료되며, 본 연구에서 분류한 치유 형태가 향후 골유도재생술 후의 결과 분석에 활용될 수 있을 것으로 사료된다.

• Journal of Periodontal and Implant Science
• /
• v.36 no.4
• /
• pp.913-923
• /
• 2006

목적 : 최근 발치 후 즉시 임플란트 식립은 널리 사용되는 수술 방식이다. 이 연구의 목적은 임플란트 주위 골결손시 Ca-P으로 표면 처리된 이종골을 사용하여 골재생을 평가하기 위함이다. 재료와 방법 : 두 마리의 개 모델에서 하악 소구치와 제일 대구치를 발치하였다. 발치 6주 후 trephine bur를 이용하여 7.5 mm 지름과 5 mm 깊이를 가진 결손부를 형성하였다. 이 후 이 결손부의 중앙에 3.5 mm 지름과 15mm 길이의 fixture(GS II)를 식립하였다. 결과적으로 임플란트와 주변을 둘러싸고 있는 골 사이에는 2.0 mm정도의 gap이 만들어진다. 준비된 결손부 내로 자기골 또는 $Biocera^{(R)}$를 채웠다. 각각 4주, 8주 후 조직 절편을 제작하였다. 조직학적 평가를 위해 Block biopsy를 시행하였다. 결과 : 두 집단 모두 임상적으로 골이 완전히 채워졌다. 자가골이 이식된 부위(control)의 평균 골-임플란트 접촉(BIC)은 각각 4주째 $28.2{\pm}19%$였고, 8주째 $44.9{\pm}9%$였다. $Biocera^{(R)}$가 이식된 부위(test)의 평균 BIC는 각각 4주째 $34.6{\pm}27%$였고, 8주째 $27.6{\pm}23%$였다. 자가골이 이식된 부위(control)의 평균 골밀도는 각각 4주째 $32.7{\pm}25%$, 8주째 $37.4{\pm}17%$였다. 골-임플란트 접촉(BIC)과 골밀도의 평균 비율(%)은 비슷하였다. 조직학적으로 자가골과 이종골 이식 부위 모두 주변골과 잘 조화를 이루었고 유사한 치유 양상이 관찰되었다. 자가골과 이종골 이식 부위간 유의한 차이는 없었다.(P>0.05) 결론 : 임플란트 주위 2 mm의 골 결손부위에 자가골 또는 이종골로 채운 경우 유사한 결과를 얻었다. 이 결과 임플란트 fixture 주위의 골 결손부 해소를 위해 자가골을 대체할 수 있는 재료로 $Biocera^{(R)}$를 사용할 수 있음을 보여준다.

• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.15-26
• /
• 2006

흡수성 차페막을 이용한 조직 유도 재생술시 차폐막의 견고성으로 미루어 보아 재생을 위한 공간의 유지가 어려울 수 있다. 조직 유도 재생술과 함께 골이식술을 시행함으로써 공간 확보와 함께 적절한 혈병의 유지를 도모할 수 있고 이식된 골은 선생골 형성을 위한 핵으로 작용할 수도 있다. 최근에 사람의 치아회분말과 연석고를 혼합한 골이식재가 여러 연구를 통해 좋은 골이식재로 평가되었다. 본 연구에서는 성견 하악 소구치 2급 치근이개부위에 외과적으로 형성하여 흡수성 차폐막과 치아회분말-연석고 혼합 이식재를 이용한 조직유도재생 술을 시행하여 치주 조직 재생의 양상을 조직학적으로 관찰하고자 한다. 생후 12개월에서 16개윌 된 체중 15 Kg 내외의 성견 4마리를 이용하였다. 실험 재료로 생체흡수성 차폐막 (Biogide(R), Swiss) 를 사용하였고, 골이식재로 치아회분말-연석고를 혼합매식 하였다. 양측 상악 소구치 부위에 변연 치조골하방에 4 mm ${\times}$ 4 mm ${\times}$ 4 mm, (깊이 ${\times}$ 근원심 ${\times}$ 협설폭경) 깊이로 골내낭을 형성하였다. 형성된 골내낭의 기저부위 치근 표면에 1/4 round bur로 notch를 형성하여 참고점으로 하였다. 무작위로 선택된 한 쪽의 결손부를 대조군으로 오직 생체 흡수성 차폐막을 사용하였고, 실험군으로 치아회분말-연석고와 생체 흡수성 차폐막을 결손부로부터 2 mm 이상 덮을 수 있도록 다듬어 결손부 위에 위치시킨 후 협측 판막을 덮고 봉합하였다. 4주 후 2마리 ,8주 후 2마리를 희생시키고 통상의 방법으로 고정, 탈회, 포매의 과정을 거쳐 광학 현미경으로 검경하였다. 그 결과, 1. 4주 대조군에서 Bio-gide(R)는 완전한 흡수를 보였고, 치근이개부내에는 큰 공간이 존재하였다. 2. 4주 실험군에서 역시 Bio-gide(R)는 완전한 흡수를 보였고, 골 결손부내에 더 많은 신생골 관찰되었다. 그러나 아직까진 기존골과 신생골간에 명확한 차이가 있어서 쉽게 구분할 수 있었다. 또한 골이식재 주변으로 파골세포가 다수 관찰되며 이로 미루어 보아 활발한 골흡수가 일어남을 알 수 있었다. 3. 8주 대조군에서 결손부내에서는 기존골에 인접하여 신생골 형성이 부분적으로 일어났으나 연조직 침입이 관찰되었다. 4. 8주 실험군은 신생골이 기존골과 매우 유사한 형태로 관찰되었고, 신생골 형성 부위에 신생 혈관 증식이 관찰되었다. 또한 골내낭 기저부위에서는 백악질과, 치주인대가 재생됨이 관찰되었다. 이상의 결과에서 치아회분말-연석고 혼합매식은 골재생을 위한 골전도성이 있는 재료로 사료되며, 이를 이용히여 치주조직재생술시 흡수성 차폐막과 병행하여 사용한다면 더 많은 골재생이 있을 것으로 기대된다.

• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.1-14
• /
• 2006

The purpose of the present study was to evaluate the histologic results of bone cavities that were surgically created in the calvaria of rabbit and filled with $HA/{\beta}-TCP$ composite powders, which had been developed in Korea (Dentium, Korea). Ten young adult rabbits were used. Four defects were surgically produced in calvaria of each rabbit. Each rabbit was anesthetized with Ketamine-HCI (5 mg/kg, Yuhan Cor. Korea) and Xylazine-HCI (1.5 ml/kg, Yuhan Cor. Korea)). An incision was made to the bony cranium and the periosteum was reflected. Using a trephine bur (external diameter: 8 mm, 3i, USA), 4 'through-and-through' bone defects were created with copious irrigation, and classified into 4 groups: control group: no graft materials, experimental group I: normal saline + graft materials: experimental group II: venous blood + graft materials: experimental group III: graft materials only. The defects were randomly filled with graft materials. The defects were closed with resorbable suture material. At the end of the surgical procedure, all animals received a single intramuscular injection of antibiotics Gentamicin (0.1 mg/kg, Dae Sung Microb. Korea). Rabbits were sacrificed with phentobarbital (100 mg/kg) intravenously at 1-, 2-, 4-, 6- and 8-week after. Specimens were treated with hydrochloric acid decalcifying solution (Fisher Scientific, Tustin, CA) and sectioned by bisecting the 8 mm diameter defects. The histologic specimens were prepared in the general method with H & E staining at 6 ${\mu}m$ in thickness. The results were as follows; 1. New bone formation showed from after 2-week of surgery in defect area. As time lapsed, lots of new bone formation and mature bones showed. 2. Histologically, degree of new bone formation could not be discerned among the experimental groups. But, for experimental group II, lots of cells gathered around graft materials after 1-week of surgery, new bone formed slightly faster and than the others at 1-week after. For experimental group I, a few inflammatory finding showed around graft material at after 1-week and after 2-week of surgery. 3. No bone formation did show for control group. Based on histologic results, the new $HA/{\beta}-TCP$ composite powders appeared to act as a scaffolding material for regeneration of osseous defects.

• Journal of Periodontal and Implant Science
• /
• v.35 no.4
• /
• pp.939-948
• /
• 2005

The role of the periosteum on osteointegration of $Bio-Oss^{(R)}$(Geistlich, Wolhusen/Switzerland) was studied in rabbit calvarial defect. 12 New Zealand white male rabbits between 2.8 and 4 kg were included in this randomized, blinded, prospective study. Each rabbit was anesthetized with Ketamine HCl(5 mg/kg) and Xylazine HCl(1.5 ml/kg). An incision was made to the bony cranium and the periosteum was reflected. Using a 6-mm trephine bur(3i. USA), four 8-mm defects were created with copious irrigation. The defects were classified into barrier membrane($Tefgen^{(R)}$, Lifecore Biomedical. Inc, U.S.A.) only group as a control, $Bio-Oss^{(R)}$ with barrier membrane group, $Bio-Oss^{(R)}$ with periosteum covering group, and $Bio-Oss^{(R)}$ without periosteum covering group. There were 2 rabbits in each group. The wound was closed with resorbable suture materials. Rabbits were sacrificed using phentobarbital(100 mg/kg) intravenously at 1, 2, and 4 weeks after surgery. The samples were fixed in 4% paraformaldehyde, and decalcified in hydrochloric acid decalcifying solution(Fisher Scientific, Tustin, CA) at $4^{\circ}C$ for 2-4 weeks. It was embedded in paraffin and cut into 6 ${\mu}m$ thickness. The sections were stained with H & E and observed by optical microscope. The results were as follows; 1. The periosteum played an important role in osteointegration of $Bio-Oss^{(R)}$ in bone defects. 2. When the periosteum remained intact and $Bio-Oss^{(R)}$ was placed on the defect, $Bio-Oss^{(R)}$ with periosteum covering has been incorporated into the newly formed bone from 2-week postoperatively. 3. When the periosteum was removed at the surgical procedure, invasion of connective tissue took place among the granules, and new bone formation was delayed compared to periosteum covering group. Therefore, when the bone grafting was performed with periosteal incision procedure to achieve tension-free suture, the integrity of the overlying periosteum should be maintained to avoid fibrous tissue ingrowth.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.273-288
• /
• 2006

The purpose of this study was to evaluate exophytically vertical bone formation in rabbit calvaria by the concept of guided bone regeneration with a custom-made porous titanium membrane combined with bone graft materials. For this purpose, a total of 12 rabbits were used, and decorticated calvaria were created with round carbide bur to promote bleeding and blood clot formation in the wound area. Porous titanium membranes (0.5 mm in pore diameter, 10 mm in one side, 2 mm in inner height) were placed on the decorticated calvaria, fixed with metal pins and covered with full-thickness flap. Experimental group I was treated as titanium membrane only. Experimental group II, III, IV was treated as titanium membrane with BBM, titanium membrane with DFDB and titanium membrane with FDB. The animals were sacrificed at 8 and 12 weeks after surgery, and new bone formation was assessed by histomorphometric as well as statistical analysis. 1. Porous titanium membrane was biocompatable and capable of maintaining the regeneration space. 2. At 8 and 12 weeks, all groups demonstrated exophytic bone formation and there was a statistical significant difference among different groups only at 12 weeks. 3. The DFDB group revealed the most new bone formation compared to other groups (p<0.05). 4. At 12 weeks, DFDB and FDB groups showed the most significant resorption of graft materials (p<0.05). 5. The BBM was not resorbed at all until 12 weeks. 6. The fixation metal pin revealed excellent effect in peripheral sealing. On the basis of these findings, we conclude that a porous titanium membrane may be used as an augmentation membrane for guided bone regeneration, and DFDB as an effective bone forming graft material. The fixation of the membrane with pin will be helpful in GBR technique. However, further study is required to examine their efficacy in the intraoral experiments.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.791-803
• /
• 2007

The purpose of this study was to evaluate exophytically vertical bone formation in residual ridge of the beagle dog by the concept of guided bone regeneration with a titanium reinforced e-PTFE membrane combined with irradiated cancellous human bone. Twelve male beagle dogs(mean age 1.5 years and mean weight 12kg) were used for this study. The alveolar ridges after extraction of all mandibular premolars were surgically and horizontally removed. At 8 weeks after extractions, full-thickness flap was reflected and cortical bone was removed with round bur and copious irrigation. Rectangular parallelepiped(10mm in length, 5mm in width, and 4mm in height) bended with titanium-reinforced e-PTFE(TR e-PTFE) membrane was placed on the decorticated alveolar ridge, fixed with metal pins and covered with full-thickness flap and assigned as a control group. Test groups ere treated with TR e-PTFE membrane filled with irradiated cancellous human bone. Of twelve beagle dogs, four control dogs and four test dogs without membrane exposure to oral cavity were sacrificed at 8 and 16 weeks respectively. The surgical sites were dissected out, fixed in 4% buffered formaldehyde, dyed using a Villanueva staining technique, and processed for embedding in plastic resin. The cutting and grinding methods were routinely processed for histologic and histomophometric analyis of exophytic bone formation as well as statistical analysis. The results of this study were as follows: 1. Exophytic bone formation in the both of experimental groups was increased respectively after surgery from 23.40% at 8 weeks to 46.26% at 16 weeks in the control groups, from 40.23% at 8 weeks to 47.11% at 16 weeks in the test groups(p<0.05). 2. At 8 weeks after surgery, exophytic bone formation was made 40.23% in the test groups and 33.40% in the control groups. Exophytic bone formation was significantly made in the test group more than in the control group. At 16 weeks after surgery, exophytic bone formation was made 44.11% in the test groups and 46.26% in the control groups. Exophytic bone formation was made in the test groups more than in the control groups, but there was no statistically significant differences. 3. The membrane was fixed with metal pins to closely contact it to the bone surface. So, collapse and deviation of the membrane could be prevented and in growth of connective tissue also could be blocked from the periphery of the membrane. On the basis of these findings, wee suggest that intraoral experimental model for exophytic bone formation may be effective to evaluate the effect of bone graft material. And it indicates that combined use of membrane and ICB graft material is more effective than use of membrane only for exophytic bone formation.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.257-262
• /
• 2006

The aims of the study were to evaluate the effect of epinephrine-containing local anesthetics on pulpal blood flow (PBF) and to investigate its effect on cavity preparation-induced PBF change. PBF was recorded using a laser Doppler flowmeter (Perimed Co., Sweden) from canines of nine cats under general anesthesia before and after injection of local anesthetics and after cavity preparation. 2% lidocaine hydrochloride with 1 : 100,000 epinephrine was administered by local infiltration given apical to the mandibular canine at the vestibular area and the same volume of isotonic saline was injected on the contralateral tooth as a control. A round carbide bur was operated at slow speed with isotonic saline flushing to grind spherical cavities with increasing depth through the enamel and into the dentin on both teeth. The obtained data was analyzed with paired t-test. Cavity preparation caused significant increase of PBF (n = 9, p < 0.05). Local infiltration of lidocaine with epinephrine resulted in decreases of PBF (n = 9, p < 0.05), whereas there was no significant change of PBF with the physiologic saline as a control. Cavity preparation on tooth anesthetized with lidocaine with epinephrine caused significantly less increase of PBF than in control tooth (p < 0.05). Therefore, the result of the present study demonstrates that local infiltration of 2% lidocaine with 1 : 100,000 epinephrine effectively reduces PBF increase caused by cavity preparation.

• Restorative Dentistry and Endodontics
• /
• v.26 no.1
• /
• pp.16-22
• /
• 2001

The purpose of this study was to evaluate the marginal microleakage of condensable composite resin restorations according to flowable resin lining of internal cavity wall. The eighty extracted human molar teeth without caries and/or restorations are used The experimental teeth were randomly assigned into four groups of ten teeth each. Eighty caries-free extracted human molars were used in this study. The conventional class II cavities (box-shaped on mesial and distal surface, faciolingual width : 3mm, gingival wall depth : 1.5mm) were prepared 1mm below cementoenamel junction with a # 701 carbide bur. The teeth were divided into four groups, and then each group were subdivided into A & B group according to flowable resin & compomer lining ; Group 1-A : Tetric Ceram filling, Group 1-B : Tetric Flow lining and Tetric Ceram filling, Group 2-A Ariston pHc filling, Group 2-B : Tetric Flow lining and Ariston pHc filing, Group 3-A SureFil filling, Group 3-B : Dyract Flow lining and SureFil filling, Group 4-A : Pyramid filling, Group 4-B : Aeliteflo lining and Pyramid filling. To simulate as closely as possible the clinical situation during retoration placement, a "restoration template" was fabricated, and the condensable resin was filled using a three-sited light-curing incremental technique. All the materials used were applied according to the manufacturers' instructions. The specimens were stored in the 100% humidity for 7 days prior to thermocycling (100 thermal cycles of 5~55$^{\circ}C$ water with a 30-second dwell time) The specimens were immersed in 2% metyleneblue dye for 24 hours, and then embedded in transparent acrylic resin and sectioned mesiodistally with diamond wheel saw. The degree of marginal leakage was scored under stereomicroscope ($\times$20) and the data were analyzed by Kruskal-Wallis test and Wilcoxon signed ranks test. The results were as follows : 1. In the gingival margins of all the group, microleakage of subgroup B was less than subgroup A. 2. In the group 1, 2, 4, there was significant differences between subgroup A and B (p<0.05), but in the group 3, there was not significant different between group 3-A (SureFil) and group 3-B (Dyract flow/SureFil) (p>0.05). 3. In the subgroup A and B, there was significant different between all group except group 4 of subgroup A. From the results above, it was suggested that the cavity lining of flowable resin and flowable compomer in condensable resin restoration decrease microleakage at gingival margin, and does improve their ability to seal the gingival margin of class II preparation.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.337-345
• /
• 1999

The purpose of this study was to compare the shape of root canal after instrumentation with some engine driven NiTi files. Thirty narrow and curved canals(15-35 degree) of mesial canals of extracted human mandibular first molars were divided into three groups. Group 1: After radicular access with Gates Glidden drill, apical shaping using step back method with Flexo file Group 2: After radicular access with Gates Glidden drill, apical shaping with Profile .04 Group 3: Canal shaping with GT file and Profile .04. Using modified Bramante technique, the root was sectioned at 2 mm from apical foramen, height of curvature, 2 mm from canal orifice. Canal centering ratio, amount of transport, amount of dentin removed, shape of canal were measured and statistical analysis is done using SPSS Program V 7.5. The results were as follows: 1. Canal centering ratio of group 3 was the lowest at coronal part, but there was no statistical difference. Centering ratio of group 2 was the lowest at curve part, and there was statistical difference between group 1(P<0.05). Centering ratio of group 2 was the lowest at apical part, but there was no statistic difference. 2. Amount of transport of group 3 was the lowest at coronal part, but there was no statistical difference. Amount of transport of group 2 was the lowest at curve part, and there was statistical difference between group 1(P<0.05). Amount of transport of group 3 was the lowest at apical part, and there was statistical difference between group 1 and group 2, group 1 and group 3(P<0.05). 3. Amount of dentin removed of group 3 was the lowest at coronal part, bur there was no statistical difference. Amount of dentin removed of group 2 was the lowest at curve part, but there was no statistical difference. Amount of dentin removed or group 2 was the lowest at apical part, and there was statistical difference between group 1 and group 2, group 1 and group 3(P<0.05). 4. The shape of the canals after instrumentation varied among the groups. The majority of canals at coronal and curve part for group 1 were round in shape(7 in 10), those at apical part were oval(8 in 10). The majority of canals at coronal part for group 2 were round in shape(7 in 10) and there was no difference in the number of shape at other part. There was no difference in the number of shape at every part for group 3. As above results, NiTi rotary instrumentation showed a trend to remain more centered in the canal than SS file instrumentation. At using NiTi file, coronal shaping with Gates Glidden drill was not statistically different from shaping with GT file. But shaping with GT file showed tapered canals, so it may be said that shaping with GT file is a safe and valuable instrumentation method.