• 한국연소학회지
• /
• 제7권2호
• /
• pp.1-6
• /
• 2002

Characteristics of laminar lifted flames of propane highly-diluted with nitrogen have been investigated at various temperatures of coflow air. At various fuel mole fractions, the base of laminar lifted flames has the structure of tribrachial (or triple) flame. The liftoff heights are correlated well with the stoichiometric laminar burning velocity considering initial temperature at a given coflow velocity. It shows that lifted flames are stabilized on the basis of the balance mechanism between local flow velocity and the propagation speed of tribrachial flame, regardless of the temperature of coflow and fuel mole fraction. Lifted flames exist for a jet velocity even smaller than the stoichiometric laminar burning velocity, and liftoff velocity increases more rapidly than stoichiometric laminar burning velocity as coflow temperature increases. These can be attributed to the buoyancy effect due to the density difference.

• 대한조선학회논문집
• /
• 제50권2호
• /
• pp.95-103
• /
• 2013

Prediction of the running posture is important to evaluate the resistance by the numerical calculation for a high speed vessel. Especially for a planing craft having a large variation of running attitude it becomes more essential, but it can not be obtained easily because the running posture and the hydrodynamic forces including the resistance are interacted with each other. So iterative calculation to obtain the dynamic forces according to the changes in attitude is necessary, in this study, considering the calculated hydrodynamic force at the assumed draft as the additional buoyancy the corrected draft is calculated through satisfying the equilibrium between the buoyancy and the hull weight. To verify the derived method three kinds of hull forms were used with the results of model tests, R/V ATHENA and 150 tons class guide vessel for middle-speed semi-planing crafts, 28 feet fast boat for a high-speed planing boat. For all cases with several iterations the converged value of draft can be obtained, lastly the resistance and flow around hull were simulated by using VOF method.

• 대한안전경영과학회지
• /
• 제19권1호
• /
• pp.9-13
• /
• 2017

In this study, the height of the flame required to estimate the heat flow path and flame spread in pool fire has been applied by the empirical formula, but it is calculated without applying the pressure and temperature parameters of the fire room. Until now, the height of the flame applied to pool fire was $l_F=0.235Q^{2/5}-1.02D$ in the Heskestad empirical formula, but accurate temperature calculation was not possible due to the temperature and pressure which are not influenced by the flame height. Therefore, applying the temperature and pressure around it can calculate the exact flame height, which can be applied to fire investigation and fire dynamics. The structure of the flame is divided into a continuous flame, an intermittent flame, and a buoyancy flame, but it is assumed that the flame height is calculated from the visual aspect to the intermittent flame region, and the temperature of the buoyancy flame is very low. The effect of heat of vaporization on the height of flame was investigated. The results showed that flame height was different according to the pressure and temperature around the fire room.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권7호
• /
• pp.709-715
• /
• 2015

일반적인 무인잠수정과는 달리 수중 글라이더는 별도의 추진체를 가지지 않고 부력과 중력의 차이에 의해서 추진력을 얻게 된다. 추진력을 얻기 위해 부력을 조절하게 되며, 부력의 변화는 부력엔진을 이용하며 수중 글라이더의 체적을 변화시킨다. 또한, 수중 글라이더의 자세를 제어하기 위해 별도의 방향타를 사용하지 않고 내부의 자세제어기를 이용하여 내부 이동질량의 위치변화를 이용한다. 내부 이동질량의 위치변화에 의한 질량중심과 질량관성모멘트의 변화가 발생하게 되며 이로 인해 수중 글라이더의 자세가 변화하게 된다. 본 논문에서는 수중 글라이더의 기구학적 특성과 운동특성을 반영한 비선형 6자유도 운동방정식을 유도하고 이를 이용한 운동 시뮬레이션을 수행하였다. 자세제어기를 이용하여 수중 글라이더의 종동요각과 횡동요각 제어 운동 시뮬레이션을 수행하였으며, 종동요각과 횡동요각 제어에 따른 수중 글라이더의 운동특성을 해석하였다.

• KIEAE Journal
• /
• 제15권2호
• /
• pp.123-131
• /
• 2015

Purpose : Improvement of indoor thermal comfort and reduction of the energy consumption in building can be obtained by applying a double skin facade system. In order to achieve effectively this purpose, design team would have to perform easy and appropriate performance analysis for making better design decision during the design process. Method : This paper focus on the natural ventilation performance of a multi-story type double skin facade with main causes which are pressure difference according to the wind and temperature difference between indoor and outdoor (Buoyancy Effect). Using this main causes, the natural ventilation ratio of wind effect-to-buoyancy effect in cavity of multi-story type double skin facade were analyzed through the performance analysis results of CFD (Computational Fluid Dynamics) simulation. Result : When the wind velocity was 2m/s, the ventilation rate in the cavity was highest. If wind velocity was slower than 2m/s wind velocity, buoyancy effect has more influence on the ventilation rate in the cavity, and if wind velocity was faster than 2m/s wind velocity, wind effect has more influence on the ventilation rate in the cavity.

• 토지주택연구
• /
• 제3권1호
• /
• pp.97-109
• /
• 2012

현재 지하차도 설계 지하수위는 철도, 지하철 및 공동구의 설계기준과 기존사례를 준용하여 지표면 이하 1.0m를 기준으로 설계하고 있으며, 대부분 과다설계 요인과 친환경적이지 못하다는 지적받고 있는 부력방지 앵커공법이 모든 현장에 획일적으로 적용되고 있다. 본 연구에서는 영종하늘도시 사업지구에 시공중인 지하차도 구조물과 관련하여 국내외 지하차도 설계, 유지관리 현황을 조사하고 지하수 유도배수계획의 현장 적용성을 검토하여 지하차도 유도배수공법의최적 설계방안 및 유지관리 가이드라인을 제시하고자 하였다. 특히, 본 연구유역을 중심으로한 유출지하수에 대한 대체수자원 활용방안 등은 향후 지하차도 부력방지공법의 가이드라인으로 매우 유용하게 활용될 수 있을 것으로 판단된다.

• 한국재난정보학회 논문집
• /
• 제14권3호
• /
• pp.343-351
• /
• 2018

연구목적: 최근 기반시설물이 대형화 됨에 따라 콘크리트 구조물의 경우는 중량감소를 위하여 중공 슬래브가 대안의 하나로 제시되고 있다. 연구방법: 중공부재의 시공 시 부력으로 인하여 시공이 어려운 점과 콘크리트 단면적이 줄어 전단성능이 부족하게 되는 구조적인 단점이 있으므로, PVC관과 같은 중공체를 이용하여 일방향 슬래브를 제작하고 시공성과 구조성능을 검토하는 실험을 실시하였다. 연구결과: PVC관을 이용한 일방향 중공슬래브의 경우 부력방지장치를 이용하면 타설 시 발생하는 중공체의 부상 및 침강을 예방하여 시공성능이 크게 개선되었으며, 휨 및 전단성능도 적합한 성능을 가진 것으로 확인되었다. 결론: 중공율과 휨성능은 큰 관계가 없지만 중공율이 큰 경우는 항복 후 2차 강성이 낮으므로 이에 대한 고려가 필요하며, 중공율의 증가에 따른 전단성능의 감소는 전단철근을 배근하면 보완될 수 있을 것으로 사료된다.

• 한국압력기기공학회 논문집
• /
• 제20권1호
• /
• pp.1-6
• /
• 2024

Crud is a corrosion deposit that forms in equipments and piping of nuclear reactor's primary systems. When crud circulates through the reactor's primary system coolant and adheres to the surface of the nuclear fuel cladding tube, it can lead to the Axial Offset Anomaly (AOA) phenomenon. This occurrence is known to potentially reduce the output of a nuclear power plant or to necessitate an early shutdown. Consequently, worldwide nuclear power plants have employed ultrasonic cleaning methods since 2000 to mitigate crud deposition, ensuring stable operation and economic efficiency. This paper details the system configuration of ultrasonic nuclear fuel cleaning equipment, outlining the function of each component. The objective is to contribute to the local domestic production of ultrasonic nuclear fuel cleaning equipment. Additionally, the paper introduces a method for accurately measuring the weight of removed crud, a crucial factor in assessing cleaning effectiveness and providing input data for the BOA code used in core safety evaluations. Accurate measurement of highly radioactive filters containing crud is essential, and weighing them underwater is a common practice. However, the buoyancy effect during underwater weighing may lead to an overestimation of the collected crud's weight. To address this issue, the paper proposes a formula correcting for buoyancy errors, enhancing measurement accuracy. This improved weight measurement method, accounting for buoyancy effects in water, is expected to facilitate the quantitative assessment of filter weights generated during chemical decontamination and system operations in nuclear power plants.

• 대한기계학회논문집B
• /
• 제32권2호
• /
• pp.158-165
• /
• 2008

The carbon dioxide properties change sharply near the critical or pseudo-critical point in the heat transfer processes. The reduction in turbulent, convective heat transfer parameters observed in some supercritical data and in experiments with common gases can be due to property variation, acceleration, buoyancy or combinations of these phenomena, depending on the conditions of the applications. In this study, the measurement for the secondary flow driven by buoyancy was carried out on the supercritical carbon dioxide turbulent flows in the different boundary condition with the constant mass flow rate. The available measuring techniques were used to clarify the behaviour of any supercritical fluid. Laser Doppler Velocimeter (LDV) and a special device was used to measure the secondary velocity and turbulent characteristics of the supercritical flows.

• 한국환경과학회지
• /
• 제23권9호
• /
• pp.1551-1562
• /
• 2014

To clarify the characteristics of TKE (Turbulence Kinetic Energy) variation for offshore wind power development, several numerical experiments using WRF were carried out in three different coastal area of the Korean Peninsula. Buoyancy, mechanical and shear production term of the TKE budget are fundamental elements in the production or dissipation of turbulence. Turbulent kinetic energy of the south coast region was higher than in other sea areas due to the higher sea surface temperature and strong wind speed. In south coast region, strong wind passing through the Korea Strait is caused by channelling effect of the terrain of the Geoje Island. Although wind speed is weak in east coast, because of large difference in wind speed between the upper and lower layer, the development of mechanical turbulence tend to be predominant. Since lower sea surface temperature and smaller wind shear were detected in west coastal region, the possibility of turbulence production not so great in comparison with other regions. The understanding of the characteristics of turbulence in three different coastal region can be reduced the uncertainty of offshore wind construction.