• 한국연소학회지
• /
• 제16권3호
• /
• pp.41-51
• /
• 2011

In this paper, we describe the behavior of two self-excitations in laminar attached free-jet flames under the influence of DC electric fields, one of buoyancy-driven and the other of diffusion-thermal instability, established from the horizontal and vertical injection. In the horizontal injection with removed buoyancy effect, oscillating flames with the frequency of 1.3 - 7.4 Hz were observed in a certain condition with Lewis number more than unity. On the other hand, it was appeared Lewis number induced self-excitation as well as buoyancy-driven self-excitation in the vertical upward injection with DC electric fields. This behavior had frequency range of 1.6 - 9.4 Hz and was exhibited to attribute the buoyancy effect. Finally, a well-defined division about two self-excitations having similar frequency range is briefly discussed.

• 한국연소학회지
• /
• 제17권1호
• /
• pp.37-47
• /
• 2012

Experimental study on comparison of diffusive-thermal self-excitation with buoyancy-driven one due to accumulation of partially premixed, preheated mixture in front of edge flame was conducted in horizontally and vertically injected laminar free-jet flames with an applied DC electric field of -10 kV. The application of horizontal injection method with the DC electric field to jet flames was experimentally designed to suppress heat-loss-induced self-excitation and thereby to highlight the definite difference between both diffusive-thermal and buoyancy-driven self-excitations with the same order of O(1.0 Hz), in that diffusive-thermal self-excitation has not been so far found experimentally in laminar jet flames. Flame stability maps in vertically and horizontally injected jet flames are presented. The distinct modes of individual self-excitation are shown to be well described by their own phase diagrams. The results show that buoyancy-driven self-excitation due to the accumulation of partially premixed, preheated mixtures in front of edge flame is branched from the buoyancy-induced self-excitation with O(10 Hz) due to a flame flicker. Once the buoyancy-driven self-excitation appears, it suppresses buoyancy-induced as well as diffusive-thermal self-excitation. The key characteristics for individual self-excitation are discussed and their functional dependencies of Strouhal number upon related physical parameters are also presented.

• 대한기계학회논문집B
• /
• 제41권1호
• /
• pp.29-36
• /
• 2017

본 논문은 환형노즐 이젝터를 이용하여 세정수 공급과 기포생성을 동시에 할 수 있는 세정기술 개발을 위한 기초연구를 목적으로 한다. 환형노즐 이젝터의 피치변화에 따른 구동 및 부유체의 정량적 유동특성과 세정수조에 분출되는 분류의 정성적 가시화 이미지를 분석하였으며, 세정물의 농약 잔류물 성분의 농도를 검증하였다. 피치가 증가하면 구동유량은 증가하는 반면에, 유량비는 감소하였다. 피치가 증가하면 분류는 부력분류나 평형분류 거동을 나타내며, 잔류농약의 농도는 감소 후 증가하였다.

• 한국분무공학회지
• /
• 제27권3호
• /
• pp.126-133
• /
• 2022

The objective of this is to experimentally investigate the effect of mixed jet on the oxygen transfer characteristics with the primary nozzle area ratio of an annular nozzle ejector for the application of a microbial fuel cell. A direct visualization method with a high speed camera system was used to capture the horizontal mixed jet images, and a binarization technique was used to analyze the images. The clean water unsteady state technique was used for the oxygen transfer measurement. The air-water mixed jet discharging into a water tank behaved similar to a buoyancy or horizontal jet with the primary nozzle area ratio. It was found that an optimum primary nozzle area ratio was observed where the oxygen transfer performance reached its maximum value due to the decrease of air volume fraction and the increase of jet length and air bubble dispersion.

• 한국수소및신에너지학회논문집
• /
• 제16권1호
• /
• pp.1-8
• /
• 2005

Transition of momentum-controlling hydrogen jet to buoyant jet is experimentally investigated in order to develop a prediction model for the moving trajectory of hydrogen leaked from hydrogen devices. In the experiments, room-temperature helium, that has a similar density to the hydrogen leaked from high pressure tank, is horizontally injected through a 4mm tube and its moving trajectory is visualized by the shadowgraph method. The moving trajectories are found to be parabolic, thereby exhibiting increasing influence of the buoyancy. In analyzing the experimental results, the vertical movement is assumed to be controlled by the buoyancy while the horizontal movement is controlled by the air entrainment caused by the initial momentum. The resealing based on this assumption yields a single curve fitting to the all experimental results.

• 한국해안해양공학회지
• /
• 제17권3호
• /
• pp.166-177
• /
• 2005

본 연구에서는 정체수역에서 유입이론과 일부 형상계수의 조정을 통해 근역에서의 하$\cdot$폐수 혼합거동을 해석할 수 있는 근역제트적분모형을 개발하기위해 총 6개의 상미분 보존방정식에 6개의 미지수를 가지는 문제를 수치적으로 풀기 위한 4차의 Runge-Kutta기법을 사용하였다. 또한, LIF 시스템을 이용하여 검정과정을 통해서 단일수평부력제트의 수리실험을 수행하였다. 그리고 기존의 모형 CORMIX 1, WSJET,그리고 본 모형의 계산결과를 수리실험결과와 서로 비교하였다. VISJET모형에 의해 예측된 중심선 제적이 운동량과 부력이 지배적인 구간에서는 실험결과와 근접한 반면에 본 제트적분모형에 의해 예측된 결과는 천이영역에서 측정된 궤적과 잘 일치하였다. 중심선희석률에 있어서 운동량과 부력이 지배적인 구간에서 CORMIX1 모형의 결과와 잘 일치하는 반면에 초기영역과 천이 영역에서 본 모형의 결과와 대체로 잘 일치하는 경향을 보였다.

• 통합자연과학논문집
• /
• 제8권3호
• /
• pp.221-232
• /
• 2015

In this study, the vertical characteristics of wind were analyzed using the horizontal wind, vertical wind, and vertical wind shear, which are generated from a wind profiler during concentrated heavy rain, and the quantitative characteristics of concentrated heavy rain were analyzed using CAPE, SWEAT, and SRH, among the stability indexes. The analysis of the horizontal wind showed that 9 cases out of 10 had a low level jet of 25 kts at altitudes lower than 1.5 km, and that the precipitation varied according to the altitude and distribution of the low-level jet. The analysis of the vertical wind showed that it ascended up to about 3 km before precipitation. The analysis of the vertical wind shear showed that it increased up to a 1 km altitude before precipitation and had a strong value near 3 km during heavy rains. In the stability index analysis, CAPE, which represents thermal buoyancy, and SRH, which represents dynamic vorticity, were used for the interpretation of the period of heavy rain. As SWEAT contains dynamic upper level wind and thermal energy, it had a high correlation coefficient with concentrated-heavy-rain analysis. Through the case studies conducted on August 12-13, 2012, it was confirmed that the interpretation of the prediction of the period of heavy rain was possible when using the intensive observation data from a wind profiler and the stability index.

• 한국해안·해양공학회논문집
• /
• 제23권6호
• /
• pp.466-473
• /
• 2011

온배수의 수중 방류 시 강한 방류 모멘텀 플럭스와 부력 플럭스에 의해 수중제트 인근에는 부력제트가 지배적인 근역이 형성되며, 이러한 근역을 해석하는 도구로써 비정수압 RANS 방정식을 적용한 전산유체역학(CFD) 모델을 이용하여 근역에 대한 적용성을 검토해 보았다. 과거 연구된 바 있는 원형 부력제트 수리실험과 유사한 조건으로 모델을 구성하고 정류시의 수평 부력 제트 경우와 가로흐름시 수직 부력 제트 경우에 대해 수치 실험을 수행하였다. CFD 수치실험의 결과는 수리실험 및 해석해 모델(CorJET)의 결과와 무차원화한 중심 궤적 및 희석율에 대해 비교 검증하였는데, 실제 수리실험의 결과와 잘 일치하는 것으로 나타났다. CFD 모델은 현재 근역 해석해 모델과 광역 준3차원 해수유동 모델이 가지고 있는 한계를 모두 보완할 수 있어 수중방류 온배수 영향해석에 적합한 모델이며, 본 연구를 통해 근역해석의 적합성을 확인하였으므로 향후 계산효율이 확보된다면 수중방류 온배수의 이동 및 확산 해석 도구로써 널리 활용될 것으로 기대된다.

• 대한기계학회논문집B
• /
• 제37권9호
• /
• pp.847-854
• /
• 2013

본 연구는 환형 노즐 이젝터를 이용하여 수평방향 폭기공정의 혼합유동 및 산소전달 특성에 대한 실험적 연구를 목표로 한다. 실험변수는 이젝터 피치와 가압수 유량이며, 측정된 유량과 압력을 이용하여 유량비, 수두비 및 효율을 계산하였다. 이적터에서 분출된 혼합유동의 가시화를 통해 정성적 거동을 고찰하였으며, 용존산소량을 측정하여 총괄 산소전달계수를 도출하였다. 이젝터에서 분출된 혼합유동은 가압수의 운동량과 유입된 공기기포의 미립화에 따라 부력분류 또는 수평분류의 거동을 나타내었다. 기포의 크기에 기인하는 부력과 가압수의 운동량에 지배되는 혼합유동의 도달거리는 가압수와 공기기포의 접촉 면적 및 시간에 크게 영향을 미치기 때문에 산소전달률의 중요한 변수임을 유추할 수 있다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.463-467
• /
• 2004

Rosette-type diffusers with four-ports per riser are constructed in relatively shallow water in Korea. However, the trajectorial bending phenomena due to lower-pressure inside the surrounded buoyant jets on the riser was not considered in most models and was not observed without any experimental results. The buoyant jet behavior affected by the bending effect where there have been growing interests need to be verified experimentally and need to be preceded in the analysis of the characteristics of the buoyant jets oil a riser. The hydraulic model experiments have been carried out to investigate the characteristics of the behavior of horizontal buoyant jets discharged from a Rosette-type riser with four ports as well as single port over a certain range of the experimental conditions including initial momentum and initial buoyancy using LIF (Laser Induced Fluorescence) system to obtain concentration fields. The intensity of the fluorescent light in each pixel on the images obtained from LIF system with the tracer of Rhodamine H was converted to the local dye concentration with a set of calibration procedures to account for the non-uniform distribution of light intensity and the attenuation of light energy by water medium. The experimental results shows that the trajectories from Your ports tend to bend more and more to the inner side with the increase of the densimetric Froude number while the buoyant jet from a single port rises up without any bending phenomena. The previous models, VISJET and Seo et al. (2002), do not simulate the trajectories well except the region before the bending section. This study will focus on the analysis of the behavior of the buoyant jets for mainly a Rosette-type riser by conducting hydraulic model experiments using LIF system.