• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.563-566
• /
• 2000

Recently vehicle development trend puts emphasis on cost reduction and performance improvement through weight reduction, and safety security to protect passenger and chassis against external impact. Primary factors effected on vehicle safety are chassis structure, chassis system, and safety equipment like bumper. Research in part of weight reduction is proceeding actively about prohibition of over-design and material through optimal design method. Bumper in these factors is demanded two of all factors, safety security and weight reduction. It is the part that prohibits or reduces a physical impact in low speed crash. Bumper is composed of a few parts but this study exhibits the shape of bumper rail has a role on energy absorption of safety security and weight reduction from structure analysis of bumper rail's variable shape surface.

• 소성∙가공
• /
• 제9권6호
• /
• pp.561-566
• /
• 2000

Recently, the hydroforming technology has been recognized as a general technique in manufacturing industry, especially in automotive industry. Hydroforming is applied to increase strength, and to decrease weight, cost and parts. Hydroforming is based on the inflation of, for Instance, a tube, coupled with axial or radial compression and by subsequent expansion and sizing against the die wall. Expansion, axial feeding, calibration are important parameters in this process. In this paper, the effects of various parameters such as internal pressure, axial feeding and friction on hydroforming of automotive bumper rail have been considered.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.22-28
• /
• 2000

By using the finite element method, the Oyane's ductile fracture integral I was calculated from the histories of stress and strain according to every element and then the forming limit of hydroforming process could be evaluated. The fracture initiation site and the forming limit for two typical hydroforming processes, tee extrusion and bumper rail under different forming conditions are predicted in this study. For tee extrusion hydroforming process, the pressure level has significant influence on the forming limit. When the expansion area is backed by a supporter and bulged, the process would be more stable and the possibility of bursting failure is reduced. For bumper rail, the ductile fracture integral i is not only affected by the process parameters, but also by the shape of preforming blank. Due to no axial feeding on the end side of the blank, the possibility of cracking in hydroforming of the bumper rail is influenced by the friction condition more strongly than that of the tee extrusion. All the simulation results show reasonable plastic deformation, and the applications of the method could be extended to a wide range of hydroforming processes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.230-235
• /
• 2000

By using the finite element method, the Oyane's ductile fracture integral I was calculated from the histories of stress and strain according to every element and then the forming limit of hydroforming process could be evaluated. The fracture initiation site and the forming limit fer two typical hydroforming processes, tee extrusion and bumper rail under different forming conditions are predicted in this study. For tee extrusion hydroforming process, the pressure level has significant influence on the forming limit. When the expansion area is backed by a supporter and bulged, the process would be more stable and the possibility of bursting failure is reduced. For bumper rail, the ductile fracture integral I is not only affected by the process parameters, but also by the shape of preforming blank. Due to no axial feeding on the end side of the blank, the possibility of cracking in hydroforming of the bumper rail is influenced by the friction condition more strongly than that of the tee extrusion. All the simulation results show reasonable plastic deformation, and the applications of the method could be extended to a wide range of hydroforming processes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1376-1380
• /
• 2005

In recent automotive industry, vehicle weight can be reduced by one-step forming of tailored blanks welded with two or more sheets of metal blanks. Tailored blank(TB) welding is a production method for blanks involving welding together materials of different quality, thickness, and coating, and has proved popular in fabrication automotive parts. This paper deals with the forming characteristics of mash seam welded tailored blanks. Using these forming characteristics, the bumper beam was developed using the mash seam welded tailored blank with the different thickness. We performed the forming simulation with respect to strain distribution on blank during the stamping of the bumper rail part. Based on these results, we made some stamping tryouts with selected types of blank designs to investigate the formability of tailored blank with different thickness. During the tryouts, we knew that it was important the BHF(Blank Holding Force). We obtained to reducing 10.5% weight and cost with adapting the bumper beam of automotive component using the tailored blank of mash seam welding.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.199-202
• /
• 2009

In roll forming process, a sheet metal is continuously progressively formed into a product with required cross-section and longitudinal shape, such as a circular tube with required diameter, wall-thickness and straightness, by passing through a series of forming rolls in arranged in tandem. Tn this process, each pair of forming rolls installed in a forming machine play a particular role in making up the required cross-section and longitudinal shape of the product. In recent years, that process is often applied to the bumper rail in the automotive industries. In this study, a optimal Front Bumper Beam manufacturing technology, model deign and proper roll-pass sequences can be suggested by forming number of roll-pass and bending angle. And also effects of the process parameters on the final shape formed by roll forming defects were evaluated.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.99-104
• /
• 2010

It is a frequent occurrence in urban traffic - a low-speed collision in which one vehicle hits the back of another. The vehicles often sustain expensive damage. Bumpers can reduce this damage, but only line up so the initial contact in an impact is bumper to bumper. Then the bumpers on the colliding vehicles have to absorb the crash energy, keeping damage away from expensive sheet metal, lights, and other components. In real world accidents, Bumper mismatches in crashes are increasing, and the resulting repair costs from low-speed collisions are escalating. In this study, we investigated the bumper rail height and analyzed their effects on repair cost. Futhermore, Our 16kph front-into-rear crash tests demonstrates bumper mismatch problem.

• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.1-9
• /
• 2010

본 연구의 목적은 저속충돌에서 승용차량의 범퍼체결구조를 분석하기 위한 것이다. 차량의 손상성-수리성 향상 연구를 위해 범퍼체결구조가 서로 상이한 3개 차종에 대해 RCAR(세계자동차 수리기술위원회)의 저속충돌시험(전,후면 40% 오프셋 충돌시험) 기준을 적용하였다. 시험결과 충격흡수능력은 직사각형 단면형상을 가지고 그 부분이 범퍼레일에 삽입되는 크래시박스식의 범퍼스테이가 대부분의 차량에 적용되고 있는 다른 두 유형의 범퍼체결구조에 비해 우수하게 나타났다. 우수하게 설계된 직사각형 단면형상을 가지는 범퍼체결구조가 저속충돌사고 시 차량의 손상성-수리성을 향상시킴으로써 승객의 안전성도 강화시킬뿐만 아니라 수리비 절감에도 기여할 수 있다는 것이 본 연구에서 입증되었다.

• 한국강구조학회 논문집
• /
• 제13권3호
• /
• pp.313-325
• /
• 2001

14TON 밴 형식의 트럭에 대응할 수 있는 튜브형 트라이빔 교량난감을 제안하였다. 이 교량난간은 합성형 지주에 연결된 튜브형 트라이빔과 철재 가드빔으로 구성되어 있는데, 튜브형 트라이빔은 다양한 범퍼 높이를 갖는 차량에 대응할 수 있고 기존의 교량 난간에 비해서 교량난간의 시종점부와 가드레일 사이를 보다 완벽하게연결할 수 있는 장점이 있다. 가드레일 지주로 사용되는 것과 동일한크기의 철재 파이프에 콘크리트를 충전한 합성형지주가 단순히 철재 파이프의 크기를 키운 것보다 강성 및 극한강도를 증대시키는데 효율적임을 확인하였다. 개발된 시스템에 대하여 $14Ton-80km/h-15Y^{\circ}$의 충돌조건으로 실차 충돌실험을 실시하였는데 NCHRP Report 350의 실험레벨 4의 평가항목을 모두 만족하였다. 컴퓨터 시뮬레이션을 통하여 이 시스템이 국내의 S2 등급으로 분류될 수 있음을 보여주었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.293-296
• /
• 2009

In roll forming process, a sheet metal is continuously progressively formed into a product with required cross-section and longitudinal shape, such as a circular tube with required diameter, wall-thickness and straightness, by passing through a series of forming rolls in arranged in tandem. In recent years, that process is often applied to the bumper rail in the automotive industries. In this study, a optimal front side member manufacturing technology, model deign and proper roll-pass sequences can be suggested by forming number of roll-pass and bending angle. And also effects of the process parameters on the final shape formed by roll forming defects were evaluated.