• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.177-184
• /
• 2016

This paper presents a strike velocity estimation using the recursive Bayesian filter that operates both correction and prediction models to probabilistically remove noises of sensors and accurately estimate the strike velocity during the real-time experiments. Four different types of bullets such as 5.56 mm M193, 7.62 mm M80, 5.45 mm 7N10 and 7.62 mm MSC were used to validate the proposed method. Compared to the existing method, the proposed method statistically results in higher stability of the strike velocity estimation as well as its reliability for the ballistic limit velocity computation.

• Structural Engineering and Mechanics
• /
• v.82 no.5
• /
• pp.587-594
• /
• 2022

Behavior of concrete elements under the effect of high-speed projectiles has gain increasing interest recently. It's necessary to understand how far the concrete can absorb the effect of bullets in order to save the occupants when design security and military infrastructures. This study presents a total of 18 concrete slabs casted and tested under reinforcement ratios, 0%, 0.35% and 0.7%. Parameters interested were slab thickness, (50 mm, 100 mm, and 150 mm) and type of weapon. All specimens tested to investigate their response under the effect of attacking by two common types of weapon. In general, it was found that projectile penetration was controlled by their thickness regardless the steel reinforcement ratio. However, the steel reinforcement controls the damage.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.43-51
• /
• 2020

The main purpose of protective facility for small military unit is to provide the protection of not all the weapons system but the near-miss bullet in Korean army. In particular about the small caliber bullets, especially KM80 in Korea, there were many studies that both of the experiential and structural design methods dose not reflect enough the military threat. For that reason, a new equation to calculate effective anti-piercing depths for RC slabs against small caliber bullets is proposed in earlier research with actual shooting test. But, the test only considers the strength of concrete without the thickness of concrete, types of aggregate, the angle of yaw of bullet, high-strength concrete, etc. Therefore, this study evaluated the ballistic resistance performance by thickness and proportion of magnetic aggregate of concrete. As a result, we identified two major statistical estimations that the error of piercing depth by the angle of yaw of bullet could be cancelled by barrage and the thickness and proportion of magnetic aggregate of concrete dose not effect on the protection ability of concrete structure.

• Korean Journal of Materials Research
• /
• v.33 no.1
• /
• pp.15-20
• /
• 2023

'Tracers' are bullets that emit light at the backside so that the shooter can see the trajectory of their flight. These light-emitting bullets allow snipers to hit targets faster and more accurately. Conventional tracers are all combustion type which use the heat generated upon ignition. However, the conventional tracer has a fire risk at the impact site due to the residual flame and has a by-product that can contaminate the inside of the gun and lead to firearm failure. To resolve these problems, it is necessary to develop non-combustion-type tracers that can convert heat to luminance, so-called 'thermoluminescence (TL)'. Here, we highly improve the thermoluminescence properties of MgB₄O₇ through co-doping of Dy³⁺+Ce³⁺ and Dy³⁺+Na⁺. The presence of doping materials (Dy³⁺, Ce³⁺, Na⁺) was confirmed by XPS (X-ray photoelectron spectroscopy). The as-synthesized co-doped MgB₄O₇ was irradiated with a specific radiation dose and heated to 500 ℃under dark conditions. Different thermoluminescence characteristics were exhibited depending on the type or amounts of doping elements, and the highest luminance of 370 cd/m² was obtained when Dy 10 % and Na 5 % were co-doped.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.9
• /
• pp.3865-3871
• /
• 2014

It is becoming progressively more understandable that different phytochemicals isolated from edible plants interfere with specific stages of carcinogenesis. Cancer cells have evolved hallmark mechanisms to escape from death. Concordant with this approach, there is a disruption of spatiotemproal behaviour of signaling cascades in cancer cells, which can escape from apoptosis because of downregulation of tumor suppressor genes and over-expression of oncogenes. Genomic instability, intra-tumor heterogeneity, cellular plasticity and metastasizing potential of cancer cells all are related to molecular alterations. Data obtained through in vitro studies has convincingly revealed that curcumin, EGCG, resveratrol and quercetin are promising anticancer agents. Their efficacy has been tested in tumor xenografted mice and considerable experimental findings have stimulated researchers to further improve the bioavailability of these nutraceuticals. We partition this review into different sections with emphasis on how bioavailability of curcumin, EGCG, resveratrol and quercetin has improved using different nanotechnology approaches.

• Steel and Composite Structures
• /
• v.23 no.2
• /
• pp.153-160
• /
• 2017

It is extremely important to be aware of the ballistic performances of engineering materials in order to be able to choose the lightest armor providing full ballistic protection in civil and military applications. Therefore, ballistic tests are an important part of armor design process. In this study, ballistic performance of plates made of carbon steel and cold worked tool steel against 7.62 mm AP (armor-piercing) bullets was examined experimentally and numerically in accordance with NIJ standards. Samples in different sizes were prepared to demonstrate the effect of target thickness on ballistic performance. Some of these samples were coated with titanium nitride using physical vapor deposition (PVD) method. After examining all successful and unsuccessful samples at macro and micro levels, factors affecting ballistic performance were determined. Explicit non-linear analyses were made using Ls-Dyna software in order to confirm physical ballistic test results. It was observed that the ballistic features of steel plates used in simulations comply with actual physical test results.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.2
• /
• pp.264-270
• /
• 2011

This paper focuses on possibility to design and fabrication new combination of bullet core to substitute current toxic material of heavy metal such as lead by environment-friendly ones. The core is designed as dual structure to manipulate the core center of gravity easily by combining materials, which of basis is tungsten of low cost and easily acquired. Those combinations are W-M series such as W-Cu, W-Sn, W-Cu-Sn, and W-Cu-Ni to target the density of lead, $11.34g/cm^3$ through powder-metallurgy. Out of four, combination of W-Cu-Ni shows the highest compression density of 96% and is confirmed as the most suitable substitution for lead due to the excellent property of matter and sintering. All combination samples is simulated on the PRODAS software for designing and structure analysis by adjusting the center of gravity of dual core samples forward and backward. The simulations confirm the similarity of current bullet core with respect to properties of mass, aero dynamics, and flying stability.

• Journal of Chest Surgery
• /
• v.15 no.4
• /
• pp.422-427
• /
• 1982

A clinical analysis of 82 cases who were sustained the penetrating gun-shot wound in the chest by 8 bullets was done during 4~ year-period from January 1978 to August 1982 in the department of thoracic surgery, CA FGH. Among 82 cases, 61 cases [74.4%] of them were brought to the Hospital by ambulance, 21 cases [25.6%] were by Helicopter and 76 cases [92.7%] of them were admitted within 4 hours after wounding. Thirty eight [46.3%] patients were treated by closed thoracotomy only, 19 cases [23.2%]by open thoracotomy, 18 cases [22.0%] by primary closure with debridement, and 7 cases [8.5%] by vascular surgery. Causes of open thoracotomy were due to massive intrapleural bleeding in 16 cases, rupture of diaphragm in 2 Gases, and heart injury in one case. Among 25 cases of surgical complications, wound infection was most common in 16 cases [53.5%] and recurrent pneumothorax in 3 cases [10%], empyema in 3 cases [10%], and BPF in one case [3.3%]. Hospital mortality was seen in 6 cases due to hypovolemic shock and respiratory insufficiency in 4 cases, spinal shock in 2 cases due to spinal injury.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.771-781
• /
• 2017

The helmet is an imperative personal protective equipment. This protective device must be able to guard the human head against potential risks. Helmets are classified according into the purpose of use; therefore, the required performance and specifications depend on the type of products. Military helmets are intended to protect the wearer's head from bullets and shrapnel. Generally, lightweight super fibers and fiber reinforced composite materials are used as helmet shell materials, and NIJ STD of U.S. Department of Justice is most widely used as international standard related to bulletproof helmets. Safety helmets are widely used for industrial application and sports leisure. In general, the performance of shock absorption must be ensured, and various lining systems are applied in material, design, and combination methods. Evaluation standards have also been classified and strictly controlled for each purpose; therefore, it is difficult to certify with the existing standards such as the recently developed convergence helmets. However, it is possible to launch the product through a separate national integrated certification procedure.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.629-637
• /
• 2016

This paper presents a ballistic limit velocity measurement using the support vector machine that classifies two classes, the partial penetration and the complete penetration, by generating a linear separating hyperplane that equally divides the classes. For the ballistic limit velocity measurement, the previous methods(MIL-STD-662F and NIJ-STD-0101.06) have required a large number of experiments that caused high cost and time. However, the proposed method is not only flexible, requiring 0.85 ~ 4.8 times fewer experiments but also reliable, providing less than 2 % difference in results compared to the previous methods. For its validation, live fire experiments were conducted using various thickness SS400 iron plates as a target and two different types of live bullets such as 5.56 mm M193 and 7.62 mm M80.