• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.198-203
• /
• 2008

In the present study, the deformation behavior of both of metal and polymer combination on impact was investigated. They have showed a different deformation behavior when the co-axially combined projectile was impacted on rigid target. The theory according to Taylor's simplified approach assumes an ideally rigid-plastic material model exhibiting rate-independent behavior and simple one-dimensional wave propagation concepts that neglect radial inertia. In the case of impact with polymeric materials, elastic strain in general are not negligible compared with plastic strain; and the rigid-plastic material behavior assumed by Taylor for metallic materials cannot be applied any more. Since, the sleeve and the core materials have widely different mechanical properties, they will produce a significant difference of mechanical impedance with each other. Therefore these impedance mismatch influences on the deformation behavior sleeved polymer projectile on impact. As a result, sleeved projectiles will generate a very interesting impact behavior. Therefore, the according to sleeved metal material and core polymer material can see expected. The objective of this study was to investigate the factors which influences on deformation behavior pattern of sleeve materials surface.

• 대한후두음성언어의학회지
• /
• 제9권1호
• /
• pp.32-37
• /
• 1998

Tonsillectomy is the one of operation that is performed the most commonly in otolaryngology field. Many changes that include range of voice, tone, voice quality and resonance were made by tonsillectomy. Sometimes, any patients taken tonsillectomy has suffer from these voice problem after tonsillectomy. However there are less study for these problems until now. Then, we studied to find the anatomical findings that affected the voice quality when tonsillectomy was performed. We evaluated the voice in 2 groups, one is the group showed the normal pharyngeal space by using the transnasal fiberscopy, the other is group showed medially bulging tonsil at pharyngeal cavity by using same method, with perceptual evaluation, nasalance score, nasality, oral formant and nasal formant. We used the computerized speech analysis system, the nasometer and the spectrogram in the CSL program. We could not find any differences in perceptual evaluation between two groups. But objective measures were provided. Nasalance score and nasality on the nasometric analysis were increased significantly and oral formant on the spectrogram was changed singnificantly after tonsillectomy in Group 2. Authors thought medially bulging tonsil in the pharynx is able to affect the voice quality after tonsillectomy when we evaluted through the nasal cavity by the using of fiberscopy and this evaluation would be important especially in singers.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.247-252
• /
• 2004

To secure stability and availability of Rammed Aggregate Pier method as the foundation of a structure, the bearing capacity and failure behavior characteristics was studied through soil laboratory tests in a model ground. In this study, soil laboratory tests use carried out to find the applicability of RAP method as the foundation of a structure. And bearing capacity and the failure mechanism of RAP method was studied according to relative density($60\%,\;70\%,\;90\%$), diameter(45mm, 60mm, 70mm) of each pier ana depth(5cm, l0cm, 15cm, 20cm, 25cm, 30cm). Earth pressure cell is set up approach RAP and 1.0D space at RAP center. Bearing acpacity and the failure mechanism of RAP is investigated by load test As a result, bulging failure was happened in $5\~10cm\;(1.0D\~2.00)$ depth which the maximum lateral earth pressure is acting. Especially, diameter changing of RAP are in inverse proportion to the relative density and the lateral stress is very much influenced by the lateral earth pressure in every layer and tends to decrease according to depth.

• 한국지반환경공학회 논문집
• /
• 제9권4호
• /
• pp.15-21
• /
• 2008

실용적인 관점에서 현재 주로 사용되고 있는 중력식 옹벽, 캔틸레버식 옹벽 및 보강토 옹벽은 원활한 배수의 확보가 어렵고 뒷채움 토공량이 증가하고 현장타설에 의해 공기가 길어지는 등 현실적인 문제점을 갖고 있다. 이에 대한 대안으로서 프리캐스트 콘크리트를 이용한 블럭식 옹벽공법이 개발되어 왔다. 이들 블럭식 옹벽은 공학적 안정성을 유지함과 동시에 다양한 전면판의 구성 및 녹화의 가능성 등의 이점을 갖고 있으므로 도심지나 주택지에서의 옹벽공사에 자주 사용되고 있다. 많은 장점에도 불구하고 블록식 옹벽은 모형 실험결과 옹벽 중앙부에서 발생하는 배부름 현상이 주로 관찰되었으며, 따라서 안정성 분석이나 설계시에는 반드시 개별블럭의 전도에 대한 안정분석을 실시하고 이를 바탕으로 최적단면을 산정해야 한다는 점을 알 수 있었다.

• 대한치과의사협회지
• /
• 제55권5호
• /
• pp.365-369
• /
• 2017

In clinical dentistry, botulinum toxin is generally used to treat the square jaw, bruxism, and temporomandibular joint diseases. Recently, this procedure has been expanded and applied for cosmetic purposes, and it is becoming a key task to be aware of the precise anatomical structure of the target muscles to be cautious during treatment and how to prevent side effects. Therefore, the purpose of this study is to observe the anatomical structure of the superficial layer of masseter muscle and to provide a most effective botulinum toxin injection method through clinical anatomical consideration. It was observed that the muscle belly of superficial part of the superficial layer was originated from the deep to the aponeurosis of masseter muscle and descend, then changed gradually into the tendon structure attaching to the inferior border of the mandible. In this study, we named this structure deep inferior tendon. This structure was observed in all specimens. We conclude that the use of superficial layer and deep layer injection should be considered to prevent paradoxical masseteric bulging in consideration of the deep inferior tendon of superficial part of superficial layer of masseter muscle.

• 소성∙가공
• /
• 제14권6호
• /
• pp.514-519
• /
• 2005

A tube hydroformability testing system was designed and fabricated enabling to apply the forming condition along arbitrarily pre-programmed internal pressure-axial feed path. The free-bulging and T-forming tests were carried out on the extruded aluminum (A6063) tube specimens with 40.6 mm outer diameter and 2.25 mm thickness. Nine different combinations of internal pressure and axial feed, yielding different strain paths from one another, were taken into consideration in order to induce bursting at various deformation modes. Major and minor strains were automatically measured from deformed grids around the fracture using a stereo-vision-based surface strain measurement system, named ASIAS. The forming limit diagram of the A6063 tube material was successfully obtained. Most of the data points acquired from free bulging and T-forming tests appeared in the range of negative minor strain on the FLD and are mostly located near the strain paths calculated from explicit finite element simulations. The forming limit obtained from tests after pre-tension was considerably lower than that from tests without pre-tension, which showed the strain path-dependency of the forming limit as well known in the sheet forming fold.

• Advances in nano research
• /
• 제5권4호
• /
• pp.337-357
• /
• 2017

Knowledge of thin films mechanical properties is strongly associated to the reliability and the performances of Nano Electro Mechanical Systems (NEMS). In the literature, there are several methods for micro materials characterization. Bulge test is an established nondestructive technique for studying the mechanical properties of thin films. This study improve the performances of NEMS by investigating the mechanical behavior of Nano rectangular thin film (NRTF) made of new material embedded in Nano Electro Mechanical Systems (NEMS) by developing the bulge test technique. The NRTF built from adhesively-bonded layers of basalt fiber reinforced polymer (BFRP) laminate composite materials in Nano size at room temperature and were used for plane-strain bulging. The NRTF is first pre-stressed to ensure that is no initial deflection before applied the loads on NRTF and then clamped between two plates. A differential pressure is applying to a deformation of the laminated composite NRTF. This makes the plane-strain bulge test idea for studying the mechanical behavior of laminated composite NRTF in both the elastic and plastic regimes. An exact solution of governing equations for symmetric cross-ply BFRP laminated composite NRTF was established with taking in-to account the effect of the residual strength from pre-stressed loading. The stress-strain relationship of the BFRP laminated composite NRTF was determined by hydraulic bulging test. The NRTF thickness gradation in different points of hemisphere formed in bulge test was analysed.

• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.181-191
• /
• 2001

조립토 다짐말뚝 공법은 자갈이나 쇄석 등의 조립질 재료를 진동기로 다지면서 지중에 조립토 말뚝을 형성하여 지반을 보강하는 공법으로 연약한 기초지반의 지지력 증가와 침하량 감소 및 압밀배수에 의한 지반개량 효과 등이 있으나, 국내에서는 아직 널리 활용되고 있지 않은 공법이다. 본 연구에서는 정방형 대칭형태 뿐만 아니라 다양한 임의의 배치형태로 설치된 무리형태의 조립토 다짐말뚝에 대해서도 극한지지력의 평가가 가능한 방법을 제시하였으며, 탄소봉을 이용한 실내모형실험을 통해 무리형태의 조립토 다짐말뚝에 대한 파괴메커니즘의 규명과 조립토 다짐말뚝의 중심간격이 좁아짐에 따른 지지력의 변화양상에 대한 규명이 이루어졌다. 탄소봉을 이용한 조립토 다짐말뚝의 모형실험결과, 무리형태의 조립토 다짐말뚝에 있어서 파괴형상은 팽창파괴의 중심점을 서로 연결할 때 중심부로 갈수록 깊어지는 원추형태의 양상을 나타냈으며, 말뚝의 중심간격이 좁아짐에 따라 원추형태의 경사각도는 급해지는 경향을 알 수 있었다. 또한 탄소봉실험에 있어서 모형말뚝의 중심간격이 좁아짐에 따라 인접한 말뚝에 의한 구속효과 및 변형억제 등의 상호작용 효과로 지지력이 증가하였다. 본 연구에서 제안한 극한지지력 평가방법을 이용하여 무리 형태의 조립토 다짐말뚝에 대한 최적 배치형태를 검토한 결과, 지지력 측면에서 조립토 다짐말뚝의 최적배치형태는 중앙부에 집중적으로 설치된 경우로 나타났다.

• 한국광물학회지
• /
• 제31권3호
• /
• pp.149-159
• /
• 2018

안산암을 벽돌 모양으로 다듬어 쌓아 올린 경주 분황사 모전석탑은 현재 남아있는 가장 오래된 신라시대 석탑이다. 석탑에서 나타나는 손상양상은 백색피각, 흑색피각, 변색, 토양흡착 등의 오염물, 생물서식, 보수물질 등이다. 구조적 요인에 의한 손상양상으로 배부름 현상이 나타난다. X-선 회절분석 결과에 의하면 백색피각의 주 구성광물은 방해석($CaCO_3$)과 서모나트라이트($Na_2CO_3{\cdot}H_2O$)로 자연 상태에서 쉽게 나타나는 증발잔류광물이다. 석탑에 나타나는 손상양상은 각 부위별로 상당히 다르다. 생물서식은 기단, 사자상, 1층과 2층의 옥개석에서, 보수물질은 기단에서 확인된다. 배부름 현상은 1층 탑신에서 나타난다. 전체적인 손상 유형별 점유율은 생물서식, 오염물, 보수물질이며 그외 배부름 현상, 박리 순으로 높게 나타났다. 가장 높은 점유율을 보인 개별 손상양상은 흑색미생물(39.3%)이며, 다음은 지의류(17.9%), 변색(8.0%), 백색피각(5.5%), 시멘트 모르타르(5.1%), 배부름 현상(3.9%), 박리(3.1%) 순으로 나타났다.

• Composites Research
• /
• 제12권5호
• /
• pp.23-30
• /
• 1999

Fiber reinforced composite materials are widely used in automotive industry to produce parts that are large, thin, lightweight, strong and stiff. It is very important to know a charge shape in order to have good products in the compression molding. In particular, the product such as a bumper beam is composed of the random and unidirectional fiber mats. The characteristics of flow fronts such as a bulging phenomenon for random mat and unidirectional fiber mat and slip parameters are studied numerically. And the effects of viscosity ratio and stack type on mold filling parameters are also discussed.