• 제목/요약/키워드: Built-up

검색결과 1,825건 처리시간 0.032초

모듈러 목업주택의 실내공기질 실측조사 연구 (A Study on Measurement of the Indoor Air Quality in Modular Mock-up Housing)

  • 전주영;김종엽;방종대;김갑득
    • 토지주택연구
    • /
    • 제6권4호
    • /
    • pp.231-237
    • /
    • 2015
  • 본 연구는 다변화 되는 건설환경에서 모듈러 주택에 대한 관심이 높아지고 있어 모듈러 목업 주택을 대상으로 신축시 실내공기질 현황을 측정하였다. 붙박이 가구가 미설치된 세대(101호)와 붙박이 가구가 설치된 세대(102호), 2세대를 대상으로 시간경과에 따라 3차 측정을 실시하였다. 1차는 마감 및 붙박이 가구 설치 직후 측정하였으며 2차는 베이크아웃 실시 이후, 3차는 약 2.5개월(77일) 이후 측정하였다. 측정결과 1차 측정시 붙박이 가구 설치세대가 오염물질 방출농도가 높았으나 톨루엔의 경우를 제외하고 모두 권고기준 이하로 나타났다. 3차 측정시에는 톨루엔과 스티렌을 제외하고 두세대가 유사한 방출량으로 나타났으며 두세대 모두 미미한 수준으로 방출량이 낮아졌다. 이는 측정세대 모듈이 적어($14.7m^2$) 베이크아웃 및 환기에 의한 영향이 크게 나타난 것으로 판단되며 이를 통해 오염물질이 외부로 방출되어 저감된 것으로 판단된다. 일반 공동주택의 입주시점을 고려한다면 모듈러 주택의 경우도 모두 실내공기질 권고기준 이하로 나타날 것으로 판단되며, 가구에 의한 영향은 톨루엔이 가장 큰 영향을 받는 것으로 나타났다. 향후에는 모듈조합을 통해 중형 이상 규모 모듈러 주택에 있어서 가구설치 여부에 따른 상관관계를 살펴 볼 필요성이 있을 것으로 판단된다.

관통형 다이아프램을 갖는 조립형 콘크리트 충전 각형 합성기둥-보 접합부의 내진성능 (Seismic Performance of Built-up Concrete Filled Square Composite Column-to beam Connection with Through Diaphragm)

  • 김선희;염경수;최성모
    • 한국강구조학회 논문집
    • /
    • 제26권5호
    • /
    • pp.431-439
    • /
    • 2014
  • 콘크리트 충전형 기둥은 두 재료의 상호작용으로 인해 강도와 연성이 증대되어 기둥부재로 많이 사용되고 있다. 부재를 효율적으로 사용하고자 하는 노력에서 얇은 강판을 사용한 폭두께비가 큰 용접조립각형 기둥형상을 제안하였다. 세장비가 큰 용접조립 각형 기둥-보 접합부에 관한 연구로써 구조적 특성을 명료하게 평가하고 접합부의 내진성능을 고찰하고자 한다. 따라서 본 논문에서는 T자형 기둥-보 접합부의 반복가력 실험을 수행하였으며, 주 변수는 다이아프램 설치 유무와 콘크리트 충전유무이다. 모멘트-회전각 관계, 소산에너지, 파괴거동등을 비교하여 변수에 따른 용접조립각형기둥-보 접합부의 응력전달 메커니즘을 평가하고자 한다.

비대칭 연결재를 갖는 조립식 압축부재의 좌굴 거동에 관한 실험 연구 I - 연결재 간격의 영향 - (An Experimental study of Buckling Behavior in Built-up Compression Member with Unsymmetric Connectors I - Effect of Distance of Connecting Members -)

  • 강상훈;한만엽;조병두
    • 대한토목학회논문집
    • /
    • 제32권4A호
    • /
    • pp.207-215
    • /
    • 2012
  • 본 연구에서는 비대칭 연결재를 갖는 조립식 압축부재의 연결재 간격에 따른 좌굴 거동을 알아보기 위한 실 대형 실험을 실시하였다. 압축부재인 H-300 형강 10 m 부재 3개를 볼트 연결하여 총 길이 30 m가 되도록 2 m 간격으로 2열 배치한 후 연결재 간격이 4 m, 5 m, 6 m인 경우에 대하여 압축 실험을 실시하였다. 본 논문에서는 연결재 간격에 따른 실험 좌굴하중을 평가하고 이를 유한요소해석 좌굴하중 및 Timoshenko 식에 의한 좌굴하중과 비교 분석 하였으며, 연결재 간격의 증가에 따른 조립식 압축부재의 좌굴 거동으로 인한 종방향 변위, 횡방향 변위, 변형률 등을 분석하였다. 실험 결과 연결재 간격이 증가함에 따라 조립식 압축부재의 좌굴 하중은 비선형적으로 급격히 감소함을 알 수 있었다. 그리고 연결재 간격이 증가함에 따라 실험 좌굴 하중과 이론 좌굴 하중의 차이 및 실험 좌굴 하중과 유한요소해석 결과의 차이도 증가되는 것으로 나타났다.

도시 녹지와 그 주변 기온의 공간적 분포- 서울시 종로구 창경궁, 창덕궁, 종묘 주변을 사례로- (Spatial Distribution of Temperature in and around Urban Parks- A Case Study of around Changkyeong Palace, Changdeok Palace and Jongmyo in Seoul-)

  • 권영아;이현영
    • 대한지리학회지
    • /
    • 제36권2호
    • /
    • pp.126-140
    • /
    • 2001
  • 서울시 종로구에 위치한 창경궁, 창덕궁, 종묘와 그 주변 지역을 사례로 소규모의 도시 녹지(녹지율 100%)가 주변 시가지의 기온에 미치는 영향을 분석하였다. 연구에 이용된 자료는 2000년 9월부터 11월까지 실측한 최고.최저 기온값 및 차량이동관측에 의한 실시간 기온값, 서울시 자동기상관측소의 시간별 기온값, 서울시 토지 이용현황도 서울시 현존식 생도, 09시 지상일기도이다. 맑고 바람이 약한 날의 주간에는 토지이용상태가 기온의 공간적 분포에 영향을 미친다. 최고기온의 경우, 녹지로 구성된 고궁에서 기온이 가장 낮고 녹지에서 멀어져 시가지 쪽으로 갈수록 높아져 녹지와 시가지간의 기온차이는 최대 7.3$^{\circ}C$에 달한다. 또한 시가지 내에서도 토지이용상태가 주거지나 공급용지(병원이나 학교)인 곳보다 고밀도의 상업지역에서 기온이 더 높다 야간에는 냉기류의 흐름으로 토지이용상태뿐만 아니라 지형도 기온분포에 중요한 역할을 한다. 차량이동관측에 의한 녹지 주변 기온의 수평 단면도는 토지이용상태와 밀접한 관련성을 갖는데 녹지에서 멀어질수록 기온이 높아져 고궁 가장장리로부터 200m 떨어진 곳에서는 1$^{\circ}C$정도, 400m에서는 3~4$^{\circ}C$차이가 난다.

  • PDF

도심 내 현존하는 옛마을에 있어서 신축주택의 배치양상 - 청주 탑동 '양달말'을 대상으로 - (The Layout Pattern of New Houses in the Existing Old Settlements in Cheongju Urban Area - with Case Study on Topdong 'Yangdalmal' -)

  • 채수민;변경화;김태영
    • 한국주거학회논문집
    • /
    • 제22권5호
    • /
    • pp.81-90
    • /
    • 2011
  • The purpose of this study is to examine if orientation, location of entrance, court yard of existing old houses are consistently maintained when houses are newly built fitting the changed lots system, and the changed road system for Topdong 'Yangdalmal' in the existing old settlements in old center Cheongju. The lots was spilt up into 15 lots in 1913, 38 lots in 1968, and 75 lots in 2010. Among them, The lots maintained are 19 lots and the lots subdivided are 56 lots. 12 houses are newly built among the 19 shape-maintained lots and 41 houses are newly built among the 56 split up lots. Most of the new houses have south-facing orientation. Main entrance near the old road keeps the direction of the previous entry. Houses built in 1970s and 1980s keep their original court yards but they are disappearing year by year by new type of houses in 1990s.

제주향교의 조영적 특성에 관한 연구 (A Study on the Constructional Characteristics of Jeju-HyangGyo)

  • 지태승;박정근;박철민
    • 한국농촌건축학회논문집
    • /
    • 제10권3호
    • /
    • pp.59-66
    • /
    • 2008
  • This study was performed to ascertain how HyangGyos based on national ideology were built in Jeju Island and what their detailed styles are. In Jeju-HyangGyo, unique architectural characteristics are shown as they have been built in an island independent from the mainland. Also up-down system was well reflected in detailed architectural styles. The main temple of Jeju-HyangGyo was built in the type of one-Chulmok(a subsidiary material of Gongpo and a piece of wood to support the eaves) of which ancon supports a purline from the center of a pillar and two-Ikgong(a piece of wood engraved to put on an ancon), but in the case of the lecture hall, its Gongpo(a piece of wood to support the eaves) was inferior in quality. In the case of Jeju abutments were used in main temples and fire walls were mostly used. In particular, their abutments are difficult to be observed in HyangGyo in the mainland. It is presumed that the abutment and the fire wall used in Jeju Island might be the best solution to protect structures from rain and moisture. To sum up, local characteristics and traditional rules were thoroughly reflected in Jeju-HyangGyos built in Jeju Island from the aspect of arrangement and detailed style. In conclusion, it is significant that architectural styles, not to mention the other aspects of Jeju culture, were suitably adapted to Jeju Island.

  • PDF

고강도 강관과 PHC파일이 활용된 흙막이 버팀보의 좌굴해석 및 설계 (Design and Buckling Analysis of Earth Retaining Struts Supported by High Strength Steel Pipe and PHC Pile)

  • 임승현;김인규;김성보
    • 한국강구조학회 논문집
    • /
    • 제27권4호
    • /
    • pp.411-422
    • /
    • 2015
  • 본 연구에서는 고강도 강관과 PHC pile을 활용한 흙막이 버팀보의 좌굴거동과 설계를 수행하였다. 조립기둥의 형식 세가지와, 연결방식, 버팀보의 전체길이(30m, 60m, 90m)에 따라 다양한 버팀보 시스템에 대한 좌굴해석을 하였고, 주부재의 국부좌굴 및 전체좌굴, 사재좌굴에 대해 유한요소해석을 통해 계산된 좌굴하중을 엄밀해와 비교분석하였다. 고강도강관 설계가이드와 PHC pile로 조립된 기둥의 P-M상관도를 활용하여 조립기둥의 설계를 수행하였다.

시공성을 향상시킨 용접조립 각형 CFT 편심 장주의 P-M 관계 (P-M Relations of Slender Welded Built-up Square CFT Column under Eccentric Loads)

  • 이성희;최성모;김영호
    • 복합신소재구조학회 논문집
    • /
    • 제6권2호
    • /
    • pp.23-31
    • /
    • 2015
  • CFST columns are structurally superior because the concrete inside the steel tubes prevents local buckling at the tubes and the tubes confine the concrete. And, the thickness of steel tube in CFST column has been thinner with development of high-strengh steel. The thinner the steel tube of a square CFST column is, the more local buckling is likely to occur. For this reason, we developed welded built-up square steel tube with stiffeners which are placed at the center of the tube width acts as an anchor. In this study, we conduct experimental test for three specimens of the 4m long span welded built-up square CFT column with parameters of L/D and D/t. And, the test results were compared with the analysis results by M-${\phi}$-P Program.

광양만 임해 매립지 느티나무 이식 이후의 연륜생장 특성 (Tree-Ring Growth Characteristics of Zelkova serrata Makino after Replanting on the Reclaimed Land from the sea in Gwangyang Bay)

  • 김도균
    • 한국조경학회지
    • /
    • 제33권6호
    • /
    • pp.40-50
    • /
    • 2006
  • This study was carried out to examine the tree-ring growth characteristics of Zelkova serrata Makino after replanting, for the built-up planting founds for stability of landscaped trees in the reclaimed land from the sea. the factors, many affecting the growths of Zelkova serrata Makino, were the replanting stress and drought. The growth reduction due to replanting and drought occurred in the replanting year and the following year. The mean sensitivity(year-to-year variation) and the coefficient of variation(tree-to-tree variation in a certain year) in tree rings of Zelkova serrate Makino, were higher in the poor soil sites than in the favourable soil ones. And the poor soil sites were the filled ground of improve soil and the covered ground of improve soil and the top ground of big mounding than mounding ground sites, especially soil hardness, alkali soil, high $Na^+\;and\;K^+,\;low\;Ca^{++}\;and\;Mg^{++}$ and T-C were the most crucial. We suggest technique development of the built-up planting ground for stability in the reclaimed land from the sea. The built-up planting grounds in reclaimed land from the sea, should be considered for the use of fair soil with the physical and chemical soil properties, -high level foundation of planting ground, and the prevention of disturbed soil-.

Experimental and numerical assessment of beam-column connection in steel moment-resisting frames with built-up double-I column

  • Dehghan, Seyed Mehdi;Najafgholipour, Mohammad Amir;Ziarati, Seyed Mohsen;Mehrpour, Mohammad Reza
    • Steel and Composite Structures
    • /
    • 제26권3호
    • /
    • pp.315-328
    • /
    • 2018
  • Built-up Double-I (BD-I) columns consist of two hot rolled IPE sections and two cover plates which are welded by fillet welds. In Iran, this type of column is commonly used in braced frames with simple connections and sometimes in low-rise Moment Resisting Frames (MRF) with Welded Flange Plate (WFP) beam-column detailing. To evaluate the seismic performance of WFP connection of I-beam to BD-I column, traditional and modified exterior MRF connections were tested subjected to cyclic prescribed loading of AISC. Test results indicate that the traditional connection does not achieve the intended behavior while the modified connection can moderately meet the requirements of MRF connection. The numerical models of the connections were developed in ABAQUS finite element software and validated with the test results. For this purpose, moment-rotation curves and failure modes of the tested connections were compared with the simulation results. Moreover to avoid improper failure modes, some improvements of the connections were evaluated through a numerical study.