• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.33 no.12
• /
• pp.99-106
• /
• 2017

Recently, the condensation and mold problems of apartment buildings has been growing due to high insulation and high air-tightness performance for energy saving. Most of all, occupants in residential buildings has suffered from property damages due to the condensation and mold of built-in furniture. Condensation at built-in furniture were generally found in winter at the of furniture's back panels, adjacent surfaces of wall, floor and ceiling. The aim of paper is to analyze the characteristics of adjacent area around built-in furniture's condensation problem and the thermal environment around the built-in furniture in winter through the field measurements at apartment buildings. In this research, the thermal conditions and surface temperature around the built-in furniture were measured during winter season. In this research, we analyzed thermal conditions for built-in furniture which were applied and not applied auxiliary heating device. In results, it is important to consider increasing surface temperature for using heater and decreasing absolute humidity due to the occupants' behavior around built-in furniture for preventing condensation.

• Journal of the Korea Furniture Society
• /
• v.29 no.1
• /
• pp.31-39
• /
• 2018

Recently, as the continuously increasing of the one-person households, builders were focusing on a built-in furniture development for efficiency. Through the dead space of the space can be reduced. Also, Condensation that occurs in a built-in furnitures installation space may result in different results depending on the room's direction, floor, finish, adjacent room effect, occupant's lifestyle. In this background, it can be considered in terms of functional aspect and morphological aspect by using WUFI2D simulation system. As a result, the tendency of occurrence of condensation was examined by comparing the water content and the growth potential of fungus graph which came from WUFI2D. Results of this study are as followings: Built-in furniture, both top & bottom open, is more stable to condensation than the built-in furniture with the top or bottom open. Also, Among from the top floor built-in furniture to the bottom of it, the bottom one is more stable to condensation.

• Korean Institute of Interior Design Journal
• /
• no.9
• /
• pp.134-138
• /
• 1996

The purpose of this study was (1) to examine how people modify and replace the built -in storage furniture in apartments, (2) to identify the problems of the built-in storage furniture and user satisfaction according to the size of the apartments, and (3) to suggest the better built-in furniture design based on the results of the study. Questionnare survey method was used , and the S-APT residents in Suwon and Bundang were selected for this study. The results were analysed by X^2$-test, T-test , F-test, frequency and percentage. It were identified that (1) the residents were not satisfied with their built -in storage furniture by its size and inside composition even in the new apartments, and (2) they tend to modify or purchase new one and these tendency was increased by the floor area increased.

• Journal of the Korea Furniture Society
• /
• v.28 no.3
• /
• pp.135-144
• /
• 2017

The development of human civilization has been accompanied by a corresponding development of storage facilities. In particular, the storage of residential spaces not only performs the storage management function for personal property but also is considered an important prerequisite for a comfortable life. While examining the history of the transformation of built-in furniture, this study emphasizes the social and cultural implications of Korean residences. Therefore, We attempt to uncover the Korean characteristics that can be discovered in the transformation of storage furniture according to the changes that occurred in Korean residential forms following the modern era and to question the problematic issues of the built-in furniture in Korea.

• Mycobiology
• /
• v.47 no.4
• /
• pp.430-440
• /
• 2019

Fungal contamination of built-in furniture is a frequent problem in Korea when new apartment is built. However, domestic information on the contaminating fungi is very limited. This study was conducted to isolate, identify and characterize the fungi of the problem in one of the apartment houses where the fungi were claimed in the built-in furniture before the house owner moves in. Fungi present in the furniture installed in a main room, dress room, and kitchen side were visually and microscopically confirmed and purely isolated on PDA. The isolated fungi were identified by analyzing the morphological characteristics and nucleotide sequence of the ITS, calmodulin gene, and TEF-1α gene. Aspergillus creber, A. niger, A. pseudoglacus, A. ruber, Cladosporium perangustum and Penicillium commune were identified. Four out of the six fungal species were positive for at least one enzyme in six kinds of extracellular enzyme assays. When these four species (A. creber, A. niger, C. perangustum and P. commune) were inoculated onto four kinds of wood chips of furniture materials, they were able to colonize all of the wood chips. Their settlement was better at 95% humidity condition than at 30% humidity condition. Among the four species, C. perangustum caused the darkest discoloration and secreted the most number of extracellular enzymes. The four species were re-isolated from the colonized wood chips and confirmed as the problematic fungi in the built-in furniture.

• Journal of Korean Institute of Architectural Sustainable Environment and Building Systems
• /
• v.12 no.6
• /
• pp.567-578
• /
• 2018

The purpose of this study was to evaluate condensation prevention for condensation vulnerable areas around built-in furniture of apartment buildings by applying auxiliary heating device. Recently, the condensation and mold problems of apartment buildings has been growing due to high insulation and high air-tightness performance for energy saving. Condensation at built-in furniture were generally found in winter at the of furniture's back panels, adjacent surfaces of wall, floor and ceiling. These problems are related to the weather conditions and indoor room conditions in winter. To solve these problems, auxiliary heating device was developed and could be installed. The aim of paper is to analyze the thermal environment around the built-in furniture which were applied and not applied auxiliary heating device in winter. In results, it was possible to increase the surface temperature of vulnerable areas around built-in furniture by applying auxiliary heating device, and to minimize condensation problems by using the minimum device.

• Journal of Families and Better Life
• /
• v.5 no.2
• /
• pp.99-107
• /
• 1987

The purpose of this study is to examine the remodeling behavior on the apartment built in furniture. The data were collected from 363 residents in Seoul area, living in apartments equipped with built-in furnitures. The major findings are as follows; 1)It was found out that 62-75% of those surveyed did not remodel their built-in furniture and 25-39% remodeled it. The major reasons for remodeling are the inconvenience in storing household items, lack of storage space and dissatisfaction of the design and color. 2)More than 80% of the apartment residents surveyed recognizes the necessity of the built-in furnitures, which were equipped already, in living room, kitchen, bathroom and the entrance area. A strong need is also indicated for the additional built-in furnitures in each bedroom, multi-service room and veranda. 3) This survey also indicated that 63-73% shows no intention of remodeling their built-in furnitures. On the other hand, 27-37% of those surveyed indicates their desire and plan to remodel them.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.21-28
• /
• 2010

This study is purposed to understand the spacial usage of the furniture in detail for interior architecture. Many documents have prescribed the spacial furniture at random. While modernist have been interested in the spacial usage of the furniture, the importance of the spacial furniture stands out in architectural space. Since long ago, a great deal of effort has been put into creating a relational harmony between the space and furniture. The villa, the weekend home of the Savoye family, was built between 1928 and 1931. Particularly, the villa Savoye was focused for this study. Le Corbusier viewed desks and case pieces for storage as architecture, and the unite furniture and architecture by developing cabinets in standard modules that could be painted either the wall color to become part of the wall or in contrasting colors to stand out as furniture. Spacial furniture was used architecturally in the interior as well, it gives the space an unexpected playfulness with the color of the finishing materials. The various usage of the Spacial furniture constitute an element of great architectural richness. They have a unique principle based on emotional order and make the man move to another space and experience the spacial connection. In particular, the furniture that was considered by Corbuisier have rational function, division of the space, leaning the structure, and so on. The furniture as the element of the space composition can change the architectural space and view as well as connecting each other. Spacial furniture appear as physical ones called wall, floor, column, and existential value as a living space.

• Journal of the Korea Furniture Society
• /
• v.17 no.4
• /
• pp.27-48
• /
• 2006

Most of us spend the greater part of our lives in the kitchen, but of all the man environments it maybe the least well-explored share commitment to a cleaner and healthier environment. It has long been kitchen system belief that the environment is a precious gift. In case of built in kitchen system, because it depend upon the earth's resources to design and manufacture steel hardware products, human beings feel an abiding responsibility to act wisely in the environmental choices we make, large and small, every day. Built in kitchen system, designed and coordinated by study of designer, represents an open, complete, free and 'focused' way of conceiving, furnishing and organizing one's own kitchen. A space rich in technical values and home warmth, where few, simple and carefully designed components distinguish and characterize the various work spaces, from the area, intended for preparing and washing food, to the cooking area, and to a wide range of multivalent pieces of furniture, wood paneled wall units and shelves.

• Journal of the Korea Furniture Society
• /
• v.16 no.2 s.30
• /
• pp.85-93
• /
• 2005

There are several way to classify the furniture. The furniture can be classified into use, style, and function, but if the furniture is classified into the way of production, it can be the industrial furniture and the studio furniture. Especially, technology and function of the furniture are important elements in industrial furniture. However, it could be considered artists' character and concept as more important elements in the studio furniture. The studio furniture had come out one of the historical movement in American furniture field after the World War II. This case to apply found objects began to increase after the 1970s. Using objects In furniture design field had built up sprightly after end of 1950s. This expression could be the statement of new expression that essential properties of matter in objects is removed. I try to suggest original and interesting furniture design to apply found objects in this thesis. Especially, I use the Korean traditional objects for the furniture and try to make their essential function to be changed. Also, I focus on furniture design to have formative element in their shapes.