• Journal of Korean Association for Spatial Structures
• /
• v.15 no.3
• /
• pp.61-68
• /
• 2015

A study on BRP(Building Rapid Printing) technology is in an initial stage although general 3d printers are being developed in a great speed and with fruitful outputs. Even some laboratories in advanced countries have difficulties in their research due to many technological restrictions and have not produced a practical output yet. This paper proposed distinct directions in which the research of this aera should be developed and this manifested four areas - printing speed, reinforcing tech, material tech and nozzle tech and those areas were proposed with concrete development alternatives and objects.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.4
• /
• pp.56-62
• /
• 2006

Various kinds of rapid prototyping processes are available, such as stereo-lithography apparatus(SLA), fused deposition modeling(FDM), selective laser sintering(SLS), 3 dimensional printing(3DP), and laminated object manufacturing(LOM). In this study, benchmark tests are carried out to obtain detailed informations about surface roughness and mechanical properties of those parts. Although the patterns and roughness averages of part surface are dependent on the surface direction, the roughness of SLA part is the best and that of FDM or 3DP part is the worst. It is shown that FDM part has an advantage in impact strength, SLS(or EOS) part in compressive strength, and LOM part has an advantage in tensile strength and heat resistance, but the change of building direction in FDM and LOM processes severely weakens the tensile and impact strengths.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.191-192
• /
• 2006

In these days, various kinds of rapid prototyping processes are available, such as stereo-lithography apparatus(SLA), fused deposition modeling(FDM), selective laser sintering(SLS), 3 dimensional printing(3DP), and laminated object manufacturing(LOM). For detailed informations about mechanical properties of those parts, benchmark tests are carried out. SLS and EOS part has an advantage in compressive strength, SLA has in hardness, FDM part has in impact strength, and LOM part has an advantage in tensile strength and heat resistance. The change of building direction in layered manufacturing processes of FDM and LOM severely weakens the tensile and impact strength.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.1
• /
• pp.69-78
• /
• 1999

Recently, with a rapid industry development, the recognition of environmental pollution is being increased. And the technique of pollution-prevention is also being studied. In the past, management direction for environmental pollution was limited only to concentration reduction and technique for treatment. But ,in these day, its direction is moved to a high level study such as a management and estimation of pollution material. In this study we establish a conception about EIS(Environmental Information System) building and present its building method. And we present a method for a database building, searching, analysis and printing. Also we produced the landuse map processing LANDSAT TM image. Using DDE(Dynamic Data Exchange) between Excel and ArcView on PC platform, we are enable to write and/or update a Report - waste discharge facility approval management leader - and to recover weakness about the report management of exsiting GSIS program.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.773-780
• /
• 2015

Traditionally, additive manufacturing (AM) technology has been used to fabricate prototypes in the early development phase of a product. This technology is being applied to release manufacturing of a product because of its low cost and fast fabrication. AM technology is a process of joining materials to fabricate a product from the 3D CAD data in a layer-by-layer manner. The orientation of a layer during manufacturing can affect the mechanical properties of the product because of its anisotropy. In this paper, tensile testing of polymer-based specimens were built with a typical AM process (FDM, PolyJet and SLA) to study the mechanical properties of the AM materials. The ASTM D 638 tensile testing standard was followed for building the specimens. The mechanical properties of the specimens were determined on the basis of stress-strain curves formed by tensile tests. In addition, the fracture surfaces of the specimens were observed by SEM to analyze the results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.193-198
• /
• 2021

In this study, the rheological characteristics and of 3D printing composite materials and the compressive strength characteristics according to the lamination patterns were evaluated. As a result of rheology test, rapid material change was observed after 60 minutes of extrusion, yielding stress 1.4 times higher than immediately after mixing, and plastic viscosity was 14.94-25.62% lower. The compressive strength of the specimens manufactured in the mold and the laminated specimens were compared, and the lamination pattern of the laminated specimens were 0°, 45°, and 90° as variables. The compressive strength of the mold casting specimen and the laminated specimen from 1 to 28 days of age showed similar performance regardless of the lamination pattern. In particular, at the age of 28 days, the modulus of elasticity, maximum compressive strength, and strain at maximum stress of all specimens were almost the same. In order to analyze the interface of the laminated specimens, X-ray CT analysis of the specimen whose compressive strength were measured was performed. Through CT analysis, it was confirmed that cracks did not occur at the lamination interface, which can be judged that the interface in the laminated specimen behaved in an integrated manner.