• KIEAE Journal
• /
• 제17권1호
• /
• pp.69-75
• /
• 2017

Purpose: Heat transfer analysis of recently developed 'slim type double-skin system window' were presented. This window system is designed for curtain wall type façade that main energy loss factor of recent elegant buildings. And the double skin system is the dual window system integrated with inner shading component, enclosed gap space made by two windows when both windows were closed and shading component effectively reflect and terminate solar radiation from outdoor. Usually double-skin system requires much more space than normal window systems but this development has limited by 270mm, facilitated for curtain wall façade buildings. In this study, we estimated thermophysical phenomena of our double-skin curtain wall system window with solar load conditions at the summer season. Method: A fully 3-Dimentional analysis adopted for flow and convective and radiative heat transfer. The commercial CFD package were used to model the surface to surface radiation for opaque solid region of windows' frame, transparent glass, fluid region at inside of double-skin and indoor/outdoor environments. Result: Steep angle of solar incident occur at solar summer conditions. And this steep solar ray cause direct heat absorption from outside of frame surface rather than transmitted through the glass. Moreover, reflection effect of shading unit inside at the double-skin window system was nearly disappeared because of solar incident angle. With this circumstances, double-skin window system effectively cuts the heat transfer from outdoor to indoor due to separation of air space between outdoor and indoor with inner space of double-skin window system.

• 인터넷정보학회논문지
• /
• 제5권4호
• /
• pp.125-134
• /
• 2004

최근 컴포넌트 기반의 소프트웨어 프러덕트 라인에 대한 연구와 소프트웨어 프러덕트 라인에 자동 생성 프로그래밍 기법을 적용하기 위한 연구가 활발히 진행 중이다. 본 논문은, 컴포넌트 기반의 소프트웨어 프러덕트 라인 개발에 활용될 수 있는 컴포넌트 재구성 자동화 도구를 제안한다. 본 도구는 도메인 공학의 주요 산물인 특성 모델로부터 재사용자의 요구 사항을 받아들여 특성 구성(feature configuration)을 만들고 이를 바탕으로 재구성된 컴포넌트 코드를 자동으로 생성한다. 이를 위하여 컨포넌트 패밀리는 자동 생성 프로그래밍의 한 기법인 GenVoco의 아키텍처를 가지며 XSLT 스크립트가 컴포넌트론 구성하는 구현 부품의 코드 템플릿을 제공한다. ‘은행 계좌’ 컴포넌트 패밀리를 사례 연구로 하여 본 논문의 컴포넌트 재구성 자동화 도구가 재사용자의 목적에 맞는 컴포넌트를 자동으로 생성함을 보였다. 본 논문의 연구 결과는 소프트웨어 프러덕트라인 개발의 생산성을 향상시키는데 응용될 수 있다.

• 정보처리학회논문지D
• /
• 제14D권2호
• /
• pp.181-190
• /
• 2007

컴포넌트 기반 개발은 시스템을 이해하고 분석하기 위한 컴포넌트 모델링 방법이 중요한 부분을 차지하고 재사용성을 높이는 방안으로써 받아들여지고 있다. 컴포넌트는 일반적으로 컴포넌트를 개발하는 사람과 그것을 조립하여 사용하는 사람의 관점이 다르며 이에 따른 내용과 목적이 다르기 때문에 대규모의 컴포넌트 시스템을 개발하는데 있어서 그 역할에 따라 두 가지 유형으로 구분하는 것이 중요하다. 이것이 현실화 되기 위해서는 명확한 컴포넌트와 인터페이스 명제가 필요하며 조립자와 개발자 간의 서로 다른 관점에서의 컴포넌트 모델이 필요하다. 이에 본 논문에서는 조립자 관점과 생성자 관점이라는 서로 다른 역할에 따라 두 가지 유형의 컴포넌트 모델을 제안하며 이를 위해 UML을 확장한다. 또한 제안한 모델을 작성, 관리하며 모델간의 자동변환을 위한 툴을 개발하여 적용해 봄으로써 그 효율성을 검증한다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.844-847
• /
• 2007

전 세계적으로 환경에 대한 관심이 고조되는 가운데 각 산업에서의 환경보호를 위한 노력이 꾸준히 진행되고 있다. 건설분야에서도 환경보존 을 노력이 지속되고 있는 실정이다. 이에 본 논문에서는 친환경성, 고내구성, 가변성, 갱신성능 그리고 쾌적성 등의 종합적인 성능을 갖춤으로써 미래형 건축물의 기본요소가 될 수 있는 친환경 지능형 건축 Component system 제안을 위한 요소기술 분석에 초점을 맞추었다. 친환경 지능형 건축 Component system 개발을 위해 요구되는 성능을 파악한 후 그 성능을 구현시키기 위한 요소기술을 분석한 결과, SI주택과 Home Automation 기술이 주요 요소기술로 도출되었다. 그리고 이론 및 문헌 고찰을 통해 도출된 요소기술의 개념 및 개발동향에 대하여 대해 살펴본 후 최종적으로 이러한 기술요소의 융합을 통한 친환경 지능형 건축 Component system 을 제안하였다.

• 한국기후변화학회지
• /
• 제5권4호
• /
• pp.331-338
• /
• 2014

The continued efforts to reduce GHG emission by international cooperation and each country are in progress. As part of these efforts, Korea's ETS is enforced in 2015. This was the time to make strategies for each company to respond Korea's ETS. This study was performed to suggest a draft of basic strategies for electronic component industry in current Korea's ETS stage are as follows; - Analyzing the nature of electronic component industry - Identifying needs for corresponding ETS of electronic component industry - Analyzing basic countermeasures for each stage of ETS - Suggesting drafts of basic strategies for electronic component industry in current Korea's ETS stage The result of this study, the current stage of Korea's ETS is moving from implementation of the scheme become determined and prepare the minimum corresponding to direct corresponding to the regulation and market change. Electronic component industry has many GHG emission growth(or change) factor, and it will be make electronic component industry as a buyer when Korea's ETS is enforced. Korea's ETS will be clearly act as a regulation rather than new business for electronic component industry. Therefore, identifying the Korea's ETS as a regulation is resonable strategy for corresponding the scheme. The basic strategies of electronic component industry th responding Korea's ETS are as follows; - Building internal organization and decision-making system before enforcement the Korea's ETS - Establishing internal basic corresponding strategies according to carbon price forecast scenarios - Considering the energy consumption and GHG emissions in design phase and preparing the global ETS market in mid or long term.

• 한국측량학회지
• /
• 제35권5호
• /
• pp.365-374
• /
• 2017

SAR (Synthetic Aperture Radar) is an effective tool for monitoring areas damaged by disasters. Full PolSAR (Polarimetric SAR) enhances SAR's capabilities by providing specific scattering mechanisms. Thus, full PolSAR data have been widely used to analyze the situation when disasters occur. To interpret full PolSAR data, model-based decomposition methods are frequently used due to its easy physical interpretation of PolSAR data and computational efficiency. However, these methods present problems. One of the key problems is the overestimation of the volume scattering component. To minimize the volume scattering component, the OA (Orientation Angle) compensation method is widely utilized. This paper shows that the effect of the OA compensation was analyzed over landslide affected areas. In this paper, the OA compensation is applied by using the OA estimated from the maximum relative Hellinger distance. We conducted an experiment using two full polarimetric ALOS/PALSAR (Advanced Land Observing Satellite/Phased Array type L-band Synthetic Aperture Radar)-2 data collected over Mocoa, Colombia which was seriously damaged by the 2017 Mocoa landslide. After OA compensation, the experimental results showed volume scattering power decreased, while the double-bounce and surface scattering power increased. Particularly, significant changes were noted in urban areas. In addition, after OA compensation, the separability of the double-bounce and surface scattering components are improved over the damaged building areas. Furthermore, changes in the OA can discriminate visually between the damaged building areas and undamaged areas. In conclusion, we demonstrated that the effect of OA compensation improved the influence of the double-bounce and surface scattering components, and OA changes can be useful for detecting damaged building areas.

• 한국도서관정보학회지
• /
• 제23권
• /
• pp.363-404
• /
• 1995

This study is to set up a model of minimum and optimum standards for college and university library building areas in Korea. The results of this study are summarized as follows: 1. minimum standards(proposal) At first, Areas needed by factors of space component are as follows: User space --- 0.45 $m^{2}$ per student. Collection space --- 0.0107 $m^{2}$ per volume Staff space --- 10.1 $m^{2}$ per person Space attached to user, collection and staff space --- 5% of the sum of user, collection and staff areas(0.041 $m^{2}$ per student). Nonassignable space --- 25% of the sum of user, collection and staff areas (0.21 $m^{2}$ per student). Next, the formula to calculate the total area of the college and university library building is as follows: N = 0.45T $m^{2}$(a) + 0.0107V $m^{2}$(b) + 10.1S $m^{2}$(c) + 0.05(a+b+c) $m^{2}$, NS = 0.25N $m^{2}$. 2. Optimum standards(proposal) At first, Areas needed by factors of space component are as follows: User spae --- 0.64 $m^{2}$) per student. Collection space --- 0.01 $m^{2}$ per volume Staff space --- 9.7 $m^{2}$ per person Space attached to user, collection and staff space --- 5% of the sum of user, collection and staff areas(0.073 $m^{2}$ per student). Nonassignable space --- 25% of the sum of user, collection and staff areas(0.38 $m^{2}$ per student). Next, the formula to calculate the total area of the college and university library building is as follows: N = 0.64T $m^{2}$(a) + 0.01V $m^{2}$(b) + 9.7S $m^{2}$(c) + 0.05(a+b+c) $m^{2}$, NS = 0.25N $m^{2}$.

• 한국주거학회논문집
• /
• 제26권6호
• /
• pp.103-113
• /
• 2015

Modular construction is a process in which a building is produced off-site in module boxes using standard materials. Since the introduction of prefabrication in building construction, Modular Coordination (MC) has become an essential design tool in building design and construction. However, in Korea, the design standardization has not been adequately applied to modular construction. This study intends to analyze the current status of modular construction in Korea and explore the applicability of MC design in the construction industry. The analysis of the current status of MC design within Korean four major modular construction companies indicates that an incremental dimension is not properly used in horizontal planning modules, which results in a problem of increasing construction cost by high material loss rate. But, in vertical planning modules, a incremental dimension of 100 mm (1 M) is found to be used although the structural system varies among manufacturers, which demonstrates the potential for an open system to be well applied in modular construction, despite different structural systems.

• 국제초고층학회논문집
• /
• 제2권3호
• /
• pp.245-255
• /
• 2013

This paper presents the results of a set of wind tunnel tests carried out to examine wind-induced overall structural loads on rectangular medium-rise buildings. Emphasis was directed towards torsion and its correlation with peak shear forces in transverse and longitudinal directions. Two building models with the same horizontal dimensions but different gabled-roof angles ($0^{\circ}C$ and $45^{\circ}C$) were tested at different full-scale equivalent eave heights (20, 30, 40, 50, and 60 m) in open terrain exposure for all wind directions (every $15^{\circ}C$). Wind-induced pressures were integrated over building surfaces and results were obtained for along-wind force, across-wind force, and torsional moment. Maximum wind force component was given along with the other simultaneously-observed wind force components normalized by the overall peak. The study found that for flat-roofed buildings maximum torsion for winds in transverse direction is associated with 80% of the overall shear force perpendicular to the longer horizontal building dimension; and 45% of the maximum shear occurs perpendicular to the smaller horizontal building dimension. Comparison of the wind tunnel results with current torsion provisions in the American wind standard, the Canadian and European wind codes demonstrate significant discrepancies. Suggested load combination factors were introduced aiming at an adequate evaluation of wind load effects on rectangular medium-rise buildings.

• KIEAE Journal
• /
• 제11권2호
• /
• pp.123-130
• /
• 2011

BIM based design methodology requires more information than traditional design methodology in order to insure efficiency throughout the project. BIM based design not only requires all building data in the form of 3D shapes, but also all other relevant data regarding building components. Information is typically grouped in a standard classification system such as by standardized material names. The development of a domestic BIM based standard classification system is yet to be created and deployed in the industry. Each designer is specifying their own building information classification systems which is causing inconsistency in the industry. Therefore BIM based designs, are causing confusion in the industry as each designer follow no guidelines for material standardization classification. The lack of information regarding this in the BIM template will continue to cause confusion about a projects building information data consistently. This study is that of preliminary research to develop a BIM template. First, overseas BIM templates were analyzed regarding BIM standards and documentation. Examination then followed regarding the element and characteristics needed for the development of a BIM template, a suggested hierarchy of elements required for a BIM template were then made. The result of this research is that it will be used to develop a "BIM template prototype", to support the generation of building information data regarding neighborhood facilities.