• Architectural research
• /
• 제14권1호
• /
• pp.11-18
• /
• 2012

College of Architecture, Georgia Institute of Technology, Atlanta, GA, US Abstract The intermittent heating and cooling energy need calculation of the ISO 13790 monthly method was examined. The current ISO 13790 method applies a reduction factor to the continuous heating and cooling need calculation result to derive the intermittent heating and cooling for each month. This paper proposes a method for the intermittent energy need calculation based on the internal mean temperature calculation. The internal temperature calculation procedure was introduced considering the heat-balance taking into account of heat gain, heat loss, and thermal inertia for reduced heating and cooling period. Then, the calculated internal mean temperature was used for the intermittent heating and cooling energy need calculation. The calculation results from the proposed method were compared to the current ISO 13790 method and validated with a dynamic simulation using EnergyPlus. The study indicates that the intermittent heating and cooling energy need calculation method using the proposed model improves transparency of the current ISO 13790 method and draws more rational outcomes in the monthly heating and cooling energy need calculation.

• 한국의류학회지
• /
• 제21권7호
• /
• pp.1153-1161
• /
• 1997

The insulation provided by clothing system is usually expressed in terms of a coo units and its distribution of the body, directly affect convective, conductive, and radiant heat loss from the skin to the environment Evaporated heat loss is dependent upon fabric permeability, the amount of body surface area covered by clothing, and the pumping of air between the body and garment layers. Persons at low to medium activity levels, dressed in conventional apparel in door environments, usually do not lose a large amount of heat through evaporation. Thermal manikin technology is used to measure the resistance to heat transfer provided by clothing systems. The reciprocal of this value, 6.45 W/m2.$^{\circ}C$ is often used in calculations for convenience. The purpose of this study was to implement a research program for calculation the insulation value (clo), body surface area and basal metabolic rate of selected clothing system. The project provided for the building of an insulation data base for use in evaluating and comparing new and improved garments.

• 설비공학논문집
• /
• 제19권1호
• /
• pp.10-18
• /
• 2007

The purpose of this study is to develop an user-friendly computer program which can analyze the thermal performance of high-rise curtain wall. In this study, the sub-routines for FVM SOLVER, HIGH-RISE CONDITION CALCULATION, AUTOMATIC SPECIFICATION BOUNDARY/MESH, MATERIAL DATABASE, and GRAPHICAL CONDENSATION/U-FACTOR OUTPUT were developed by using Visual Basic. The curtain wall heat conduction simulation results of program showed good agreement with those of FLUENT and THERM. The minimum and maximum relative error rates were 3.17 and 9.68% compared to other software.

• KIEAE Journal
• /
• 제17권1호
• /
• pp.23-28
• /
• 2017

Purpose: Many design index that are using in planning phase have been developed. The most popular things among them are Window to Wall Ratio and Surface to Volume Ratio. However there are some limits. Window to Wall Ratio cannot consider building size and Surface to Volume Ratio cannot do Window to Wall Ratio. Accordingly, in this paper, the Window to Floor Ratio was proposed that it can be considered both building size and Window to Wall Ratio. And analyzed correlation of energy demand. Method: For the test, 16 modules with the size of $6m{\times}6m{\times}4m$ were used to make 35 models with the same volume. The simulation was conducted to 945 cases using the window-to-wall ratio of 30, 50 and 70 % in three areas such as Seoul, Gwangju and Jeju and three kinds of windows. And IES_VE was used. Result: The findings above show that the Window to Floor Ratio that can be considered both building size and Window area have to become as design index. It was found out that design criteria with SHGC is necessary, not with the thermal performance (U-value). It is needed to additional analysis about residential building and the effect of 24-hours heating and cooling condition. It plans to carry out research to establish design indicators for climatic conditions in the country and building applications.

• 한국조경학회지
• /
• 제50권2호
• /
• pp.1-22
• /
• 2022

컴퓨터 시뮬레이션 프로그램인 ENVI-met을 활용하여 여름철 도로 방향과 가로수 식재형태에 따른 도시공간의 열환경 개선 효과를 분석하였다. 수목 식재 시 낮 시간 동안의 기온과 풍속은 감소하고 상대습도는 증가하였다. 평균복사온도와 인간 열환경지수 PET(physiological equivalent temperature), UTCI(universal thermal climate index)는 수목 식재 시 감소하는 경향을 보였다. 수목 식재 시 가장 큰 변화를 보인 기상요소는 평균복사온도로, PET와 UTCI 변화량 또한 평균복사온도와 유사한 패턴을 보였다. 가장 큰 저감효과를 보인 수목식재방법은 수고가 낮고, 수관폭이 넓고, 엽면적지수가 높은 수목을 좁은 간격으로 식재하는 시나리오(LWDN)였다. 평균복사온도, PET, UTCI는 태양의 고도 및 방위와 건물의 위치에 따른 그림자 형성 조건에 따라 큰 차이를 보였으며, 건물에 의한 태양복사에너지 차단이 클수록 수목에 의한 영향이 줄어들었다. 특히, 동측과 서측 보도에서는 시간대별 저감량에서 큰 차이를 보였다. 가장 저감효과가 큰 수목식재 시나리오인 LWDN으로 식재하였을 때 서측 방면에 위치한 북서, 서, 남서측 보도는 오전 시간대인 10:00에 수목이 없는 경우에 비해 PET 8.6-12.3℃, UTCI 4.2-4.5℃, 동측 방면에 위치한 북동, 동, 남동측 보도는 오후 시간대인 16:00에 PET 8.1-11.8℃, UTCI 4.4-5.0℃로 큰 저감효과를 보였다. 반면, 가장 저감효과가 적었던 수고가 높고, 수관폭이 좁으며, 엽면적지수가 낮은 수목을 넓은 간격으로 식재하였을 때 최대 저감량은 동측 방면 보도에서 PET 1.8℃, UTCI 0.9℃ 이하, 서측 방면 보도에서 PET 3℃, UTCI 0.9℃ 이하로 적은 저감효과를 보였다. 또한, 건물에 의한 영향으로 인해 수목영향이 적은 시간대에는 수목식재 시나리오 간 평균복사온도, PET, UTCI 저감효과의 차이가 크지 않았다. 이 연구결과는 가로수 식재 시 여름철 도시 열환경 저감을 위한 모델 개발에 기초자료로서 활용가능할 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권6호
• /
• pp.876-883
• /
• 2015

국립산림과학원에서는 한옥의 전통건축기술을 바탕으로 한국형 기둥-보 목조주택인 ?그린 프로젝트를 2006년부터 진행해오고 있다. 최근에는 에너지 절약 기술요소를 적용하여 건물의 에너지성능을 개선하고자 하였다. 본 연구에서는 강화된 단열기준에 따른 기둥-보 목조벽체의 단열상세를 제시하고 그에 따른 건물 에너지 절감 효과를 평가하고자 하였다. 건물외피의 열관류율은 현행법 수준과 저에너지주택인 패시브하우스 수준인 두 단계로 나누었으며 건물에너지 성능을 평가하기 위하여 건물의 기밀성능은 국내 신축 목조주택 수준인 $3.0h^{-1}$과 패시브하우스 수준이 $0.6h^{-1}$ 두 단계로 나누어 열관류율과 기밀성능의 조합에 따라 4가지 경우에 대한 건물에너지 성능 평가가 이루어졌다. 대상건물은 서울에 위치하였으며 에너지 성능은 상용 건물에너지성능 평가 프로그램인 CE3가 사용되었다. 강화된 열관류율에 따라 시뮬레이션을 진행한 결과 연간 난방에너지 요구량은 $14kWh/(m^2{\cdot}a)$ 절감효과를 나타냈다.

• International Journal of Concrete Structures and Materials
• /
• 제6권2호
• /
• pp.111-121
• /
• 2012

The research presented in this paper analytically examines the fire performance of flat plate buildings. The modeling parameters for the mechanical and thermal properties of materials are calibrated from relevant test data to minimize the uncertainties involved in analysis. The calibrated models are then adopted to perform a nonlinear finite element simulation on a flat plate building subjected to fire. The analysis examines the characteristics of slab deflection, in-plane deformation, membrane force, bending moment redistribution, and slab rotational deformation near the supporting columns. The numerical simulation enables the understanding of structural performance of flat plate under elevated temperature and, more importantly, identifies the high risk of punching failure at slab-column connections that may trigger large-scale failure in flat plate structures.

• Architectural research
• /
• 제17권2호
• /
• pp.75-81
• /
• 2015

Insulation and condensation performance evaluation (I&CPE) is an important energy analysis. While considerable amount of data are already represented in a Building Information Model (BIM), the lack of interoperability between BIM modeling and I&CPE programs prevents the simulation process from being efficient and accurate. This study proposes a prototype of a BIM-based I&CPE simulation program, in order to enhance the interoperability between BIM modeling and I&CPE programs. This study discusses the information flow process, defines the required information and its level of detail, develops standardized libraries, and finally proposes a prototype that consists of a data extraction module, conversion module, and performance module. The assurance of interoperability between systems might greatly benefit architects and energy professionals.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.228-232
• /
• 2003

It has recently been shown that the instability of thin film of a nanoscale can be used in the processes of building nano-size structures, which have potential practical importance in nanotechnology. Molecular dynamics simulation is conducted to probe the thin fluid film of a nano-size and its dynamic behavior during destabilization and structure formation. Non-continuum characteristics are shown in the properties like pressure tensor, viscosity, and thermal conductivity. The thermocapillary force induces a slow growth of long waves in the scale considered. A long-range interaction with the solid wall induces vertical structures, whose formation time and space between neighbors are proportional to the strength of the interaction.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1378-1385
• /
• 2008

This study is aimed to analyze the flow patterns and thermal characteristics by computer simulation under the variations of fire strength for Daegu-Pahang Yimgo-4th tunnel, from which flow and heat distributions are predicted in the longitudinal tunnel. Though the results of numerical computations, followings are found; one is that the volume flow rate is discontinuously increasing as closer to fire location, and the other is that a critical design to get faster flow rate is required because of existence of backlayer flow for the high fire strength in view of safety for the people in fire of the tunnel.