• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.2
• /
• pp.85-90
• /
• 2021

A ADAS(Advanced Driver Assistance System) for the safe driving is an important area in autonumous car. Specially, a ADAS software using an image sensors attached in previous car is low in building cost, and utilizes for various purpose. A algorithm for detecting the break-lamp from the tail-lamp of preceding vehicle is proposed in this paper. This method can perceive the driving condition of preceding vehicle. Proposed method uses the YOLO techinicque that has a excellent performance in object tracing from real scene, and extracts the intensity variable region of break-lamp from HSV image of detected vehicle ROI(Region Of Interest). After detecting the candidate region of break-lamp, each isolated region is labeled. The break-lamp region is detected finally by using the proposed selective-attention model that percieves the shape-similarity of labeled candidate region. In order to evaluate the performance of the preceding vehicle break-lamp detection system implemented in this paper, we applied our system to the various driving images. As a results, implemented system showed successful results.

• Journal of KIBIM
• /
• v.10 no.4
• /
• pp.32-39
• /
• 2020

In recent years, the construction industry is getting bigger and more complex, so it is becoming difficult to acquire point cloud data for construction equipments and workers. Point cloud data is measured using a drone and MMS(Mobile Mapping System), and the collected point cloud data is used to create a 3D digital map. In particular, the construction site is located at outdoors and there are many irregular terrains, making it difficult to collect point cloud data. For these reasons, adopting a noise reduction algorithm suitable for the characteristics of the construction industry can affect the improvement of the analysis accuracy of digital maps. This is related to various environments and variables of the construction site. Therefore, this study reviewed and analyzed the existing research and techniques on the noise reduction algorithm. And based on the results of literature review, performance evaluation of major noise reduction algorithms was conducted for digital maps of construction sites. As a result of the performance evaluation in this study, the voxel grid algorithm showed relatively less execution time than the statistical outlier removal algorithm. In addition, analysis results in slope, space, and earth walls of the construction site digital map showed that the voxel grid algorithm was relatively superior to the statistical outlier removal algorithm and that the noise removal performance of voxel grid algorithm was superior and the object preservation ability was also superior. In the future, based on the results reviewed through the performance evaluation of the noise reduction algorithm of this study, we will develop a noise reduction algorithm for 3D point cloud data that reflects the characteristics of the construction site.

• Asia Marketing Journal
• /
• v.11 no.2
• /
• pp.1-20
• /
• 2009

Feng Shui practice is very popular in East Asia and has been rapidly adopted by the population of the West. As Feng Shui involves knowledge of object placement, it opens opportunities to market Feng Shui knowledge and products. This paper presents an analysis of a successful Feng Shui enterprise, World of Feng Shui (WOFS), that has been established by a well-known Feng Shui expert Lillian Too and her daughter Jennifer Too. The enterprise's marketing strategies and tactics are tied to the theoretical concept of social influence, widely researched in the consumer behavior literature. The three types of social influence (informational, utilitarian, and value-expressive) are examined in relation to WOFS' marketing strategies using secondary data material. The main results indicate that the strategies of WOFS enterprise address all three types of social influence. The articles generated on-and off-line can be mostly associated with the informational influence. The off- line activities such as events, courses/workshops, and TV shows are also informational in nature. The Q & A sections/postings can be considered as representative of the utilitarian influence. They give experts (e.g., Lillian Too) the opportunity to provide individuals with problem-specific recommendations. Mega-mall website provides the value-expressive influence as purchase and consumption of the Feng Shui products is most susceptible to this type of influence. In terms of implications, WOFS enterprise strategies are suitable not only for consumes but also for business executives in Asia and in the West as architects, designers, and homeowners across continents use Feng Shui practices for building placements and decoration of dwellings and workplaces. Feng Shui practice has some limitations such as conflicting opinions of experts and increased complexity when the dimension of time is taken into consideration. Still, Feng Shui as a practice is growing globally adjusting itself to regional and cultural challenges.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.804-814
• /
• 2023

Various buildings are scattered below and around the flight path of UAM (Urban Air Mobility), which flies within a densely populated urban area. And the vertiport used by UAM for takeoff and landing is located on a flat area within the city center or on top of a building. As such, UAM operates in densely populated urban areas, and vertiports for takeoff and landing are installed in densely populated areas, requiring a very high level of safety. In particular, for safe landing of UAM, it is necessary to monitor the approach status of UAM approaching the vertiport from the final approach course and provide approach information. Accordingly, to monitor the UAM vertiport final approach path, research was conducted on technology that utilizes optical equipment that can be installed in a narrow site and has the advantage of reducing the burden of electromagnetic waves.

• Korean Journal of Cognitive Science
• /
• v.22 no.3
• /
• pp.271-298
• /
• 2011

The lexical semantic system should be built to grasp lexical semantic information more clearly. In this paper, we studied a semantic clustering of predicates that is one of the steps in building the lexical semantic system. Unlike previous studies that used argument of subcategorization(subject and object), selectional restrictions and interaction information of adverb, we used sense tagged definition in dictionary for the semantic clustering of predicate, and also attempted hierarchical clustering of predicate using the relationship between the generic concept and the specific concept. Most of the predicates in the dictionary were used for clustering. Total of 106,501 predicates(85,754 verbs, 20,747 adjectives) were used for the test. We got results of clustering which is 2,748 clusters of predicate and 130 recursive definition clusters and 261 sub-clusters. The maximum depth of cluster was 16 depth. We compared results of clustering with the Sejong semantic classes for evaluation. The results showed 70.14% of the cohesion.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.118-128
• /
• 2015

Recently BIM technology has been expanded for using in construction project. Due to the high-cost of BIM infrastructure development, lack of regulations, lack of process and so forth, usage of BIM has been delayed than initial expectations. In design phase, especially, collaboration based on BIM system has been a key factor for successful next generation building project. Through the analysis of current research trends about IT technologies, virtualization and BIM service, data exchange such as drawings, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. The purpose of this study is to enable the cloud computing BIM server to provide several main functions such as editing models, 3D model viewing and checking, mark-up and snapshot in high-performance quality by proper design of VDI system. Concurrent client connection performance is a main technical index of VDI. Through testing of test-bed server client, developed VDI system's multi-connect control is evaluated. Performance-test result of BIM server VDI effect to development direction of cloud computing BIM service for commercialization.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.1
• /
• pp.69-80
• /
• 2022

Drone photogrammetry generally acquires images vertically or obliquely from above, so when photographing for the purpose of three-dimensional modeling, image matching for the ground of a building and spatial accuracy of point cloud data are poor, resulting in poor 3D mesh completeness. Therefore, to overcome this, this study analyzed the spatial accuracy of each drone image by acquiring smartphone images from the ground, and evaluated the accuracy improvement and completeness of 3D mesh when the smartphone image is not combined with the drone image. As a result of the study, the horizontal (x,y) accuracy of drone photogrammetry was about 1/200,000, similar to that of traditional photogrammetry. In addition, it was analyzed that the accuracy according to the photographing method was more affected by the photographing angle of the object than the increase in the number of photos. In the case of the smartphone image combination, the accuracy was not significantly affected, but the completeness of the 3D mesh was able to obtain a 3D mesh of about LoD3 that satisfies the digital twin city standard. Therefore, it is judged that it can be sufficiently used to build a 3D model for digital twin city by combining drone images and smartphones or DSLR images taken on the ground.

• Cartoon and Animation Studies
• /
• s.34
• /
• pp.263-292
• /
• 2014

This research explores websites of comics museum provided by the Korean Manhwa Museum and the Kyoto International Manga Museum and is supposed to analyze the type of content and finding out features. Since both museums specialize in comics and provide diverse information related to comics and their museums, this research analyze them on the basis of three types of categories, which are public relations content, professional content, and exhibition/education content The result shows that both museums generally provide similar type of information and content even though there are small differences. Especially, they have common points in the way that both offer detailed information of museum facilities and about exhibition schedules and education programs. However, the goal they are aiming at shows a difference. Korea Manhwa Museum tries to have interactive communication with its site visitors using the bulletin board system and to update newly published comics and events frequently managing separate websites. Kyoto International Manga Museum seems to focus on promoting itself in order to have more museum visitors. It provides detailed information such as history of the museum building, the object of setting up the museum and so on. Also, it provides four different foreign language websites.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.1-8
• /
• 2020

Communication between system modules is applied using the Modbus protocol in industrial sites including smart factories, industrial drones, building energy management systems, PLCs, ships, trains, and airplanes. The existing Modbus was used for serial communication, but the recent Modbus protocol is used for TCP/IP communication.The Modbus protocol supports RTU, TCP and ASCII, and implements and uses protocols in embedded systems. However, the transmission I/O devices for RTU, TCP, and ASCII-based protocols may differ. For example, RTU and ASCII communications transmit on a serial-based communication protocol, but in some cases, Ethernet TCP/IP transmission is required. In particular, since the C language (object-oriented) is used in embedded systems, the complexity of source code related to I/O registers increases. In this study, we designed software that can logically separate I/O functions from embedded devices, and designed the execution logic of each instance requiring I/O processing through a delegate class instance with Modbus RTU, TCP, and ASCII protocol generation. We designed and experimented with software that can separate communication I/O processing and logical execution logic for each instance.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.175-198
• /
• 2022

With the development of technology, the methods of digitally converting various forms of analog information have become common. As a result, the concept of recording, building, and reproducing data in a virtual space, such as digital heritage and digital reconstruction, has been actively used in the preservation and research of various cultural heritages. However, there are few existing research results that suggest optimal scanners for small and medium-sized relics. In addition, scanner prices are not cheap for researchers to use, so there are not many related studies. The 3D scanner specifications have a great influence on the quality of the 3D model. In particular, since the state of light reflected on the surface of the object varies depending on the type of light source used in the scanner, using a scanner suitable for the characteristics of the object is the way to increase the efficiency of the work. Therefore, this paper conducted a study on nine small and medium-sized buried cultural properties of various materials, including earthenware and porcelain, by period, to examine the differences in quality of the four types of 3D scanners. As a result of the study, optical scanners and small and medium-sized object scanners were the most suitable digital records of the small and medium-sized relics. Optical scanners are excellent in both mesh and texture but have the disadvantage of being very expensive and not portable. The handheld method had the advantage of excellent portability and speed. When considering the results compared to the price, the small and medium-sized object scanner was the best. It was the photo room measurement that was able to obtain the 3D model at the lowest cost. 3D scanning technology can be largely used to produce digital drawings of relics, restore and duplicate cultural properties, and build databases. This study is meaningful in that it contributed to the use of scanners most suitable for buried cultural properties by material and period for the active use of 3D scanning technology in cultural heritage.