• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.04a
• /
• pp.71-78
• /
• 1993

This study serves as a part for the development of an integrated structural design system. Efficient data management is essential in engineering computer applications where the volume of data is large and the data flow and sharing are required. From a viewpoint of computer application, building structures can be considered to be a mass ofdata. The centralized database(CDB) and database management system frees the application from the details of managing data storage and retrieval while providing a common pool of information. For this, systematic information analysis and modeling have to be preceded. In this paper we described the result of database modeling of building structure.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.2 no.1
• /
• pp.16-23
• /
• 2002

The Subject of this research is building integrated library to supported to CAAD of the A.E.C field that is oriented to the environment of integrated design. In this research, we design and implement a new library model as a solution of design-data sharing and multi-displaying that is on the rise among many problems in construction integration. We name this integrated library ACO(Actual Component Object) and using the ACO, we can share data without loss in the fields such as construction, estimation, structure. Together with this, the different expressions along each field provide the solution of sharing both graphic data and non-graphic data. This ACO is a newly conceptualized Library that is able to supply a composite structure to an architect(designer) through the internet-based ACO System. To the ACO System that supplies those ACO service, we introduce the concept of DBMS in design and design administrator, and we investigate the solutions that enable an architect to use this ACO directly on the Web.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.555-557
• /
• 1997

This paper discusses a set of critical requirements in building and using a shared, integrated information management system for power distribution management and control. It then proposes a modem, object-oriented information system model for building such a system based on the current state of arts in database, GIS, and WWW technologies. The key of the proposal is that the shared database system should be the basis of integration efforts in power distribution management and control. A small-scale prototype is being developed to demonstrate the effectiveness of the proposed model.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1104-1105
• /
• 2008

This paper presents the assesment of experimented data and estimated data for electrical and thermal performance evaluation of building integrated photovoltaic(BIPV) system of cold facade type. BIPV module is used to estimate the dependence of module temperature on irradiance, ambient temperature and indoor temperature. The module temperature of no free ventilated facade PV system is higher than cold facade PV system about 13.4$^{\circ}C$. By the results on simulation, the reduction of electrical power loss is 9.57% into cold facade according to free ventilation. The annual averaged PR of BIPV system into cold facade is about 73.1%.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1120-1121
• /
• 2008

This paper is proposed cooling system of BIPV(Building Integrated Photovoltaic) by micro-controller. The output power of PV generation system is not systematically tracked and influenced by various factors; solar irradiance, solar cell temperature. The temperature of solar module should be minimized to increase electrical output. Therefore, it is proposed that micro-controller cools to decrease temperature of solar module using thermoelement. The validity of this paper is proved by comparing solar module temperature of cooling system and un-cooling system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.169.1-169.1
• /
• 2010

Geothermal heat pump(GHP)system has been extensively disseminated due to the recent increasing demand over new and renewable energy. However, the economics and system reliability has been key issues and barriers to insure a better system performance as designed originally. The building integrated designs of geothermal heat pump system are test and optimize GHP system by evaluating its performance in virtual reality. System design is an iterative process that will help optimize the cost efficiency of the system. One of the primary goals is to minimize the energy imbalance between the amount of energy extracted from the ground and the energy reject to it. This will reduce the land area required to install the GHX, reduce the cost of installing it and ensure the long-term efficiency of the system. Commissioning is the process of ensuring that are designed, installed, functionally tested, and capable of being operated and maintained to performance in conformity with design intent. In this paper, Study on introduction of Initial commissioning method of Geothermal Heat Pump(GHP) system using ISO performance data has been introduced. Also KIER GHP Simulator is used to simulate actual heat pimp operating condition and test commissioning method. Result should that the experiment data base could verify the applicability of the commissioning method, and also were able to suggest a better ways to GHP commissioning.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.11
• /
• pp.45-55
• /
• 2018

To reduce the energy consumption of HVAC system in buildings, thermally activated building system(TABS) has been applied to low energy building because of energy efficient performance and reduction of peak load. DOAS coupled with a parallel sensible cooling could be promising because TABS handles sensible heat load only. The purpose of this study was to evaluate the indoor thermal environment and cooling operation characteristic of TABS with dedicated outdoor air system(DOAS) in Korea climate. Indoor thermal environment and operation characteristic of TABS integrated with DOAS are investigated at different TABS operation schedules and climate conditions by simulation tests. The result shows that the DOAS is more suitable for hot and humid climates. And also it show that the potential of intermittent operation of TABS.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.355-361
• /
• 2002

There are many economic and operational reasons to integrate fire alarm signaling system with other building automation system. Integration of this requires open network with for the standard communication protocol and careful design practices. The important point for this is also the development of intelligent control modules for replacing the conventional zone adapter in fire system. Therefore, this paper proposes an new conceptual design of the open distributed fire alarm signaling system for the integration of BAS, a new intelligent control modules with LonTalk protocol and a new control modules for power line communication. Newly proposed additions to LonWorks network make it very well suited for integrating fire systems with other building automation sub-systems and another BAS with low cost. Additionally, it is very important that best design practices, test procedures and building codes need to be modernized to accommodate integrated building systems.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.48-53
• /
• 2008

The performances of the building service equipment relay on the individual superintendent's share for the assessment of performance, fault detection, deterioration diagnosis of the building service equipment. A major use of building energy management system(BEMS) is for monitoring plant and building's energy consumption. National building management system (N-BMS) presented in this study links buildings into a network group in order to monitor and control the buildings. How to construct the N-BMS was considered to save energy resource and to conserve performance of building service equipment. The FEMIS, facility, energy/environmental management & information system, for building service offer management process integrated with BAS, FMS and EMS and so on.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.130-131
• /
• 2015

Accurate construction progress measurement is an important issue for successful project delivery. This paper presents a method that keeps track of the progress measurement involved in construction operations and facilities visualization of the data using BIM and IOT. To verify the method, a residential house project was used for the case study. Test case verifies the usability and validity of the method implemented in the system.