• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.605-611
• /
• 2005

System safety management to secure complicated system safety such as railway and nuclear includes various factors. Those are prevention of accidents, faults management, human factor, men-machine relation, organization factor, safety culture, quality/quantity safety performance goal, and safety regulations. To manage them, it is required that database which is based on most analysis is established. Therefore system safety could be controlled. This research defines data required to safety management, and that is aimed at deriving plans in order to establish them as database. To accomplish that, safety information management of other systems such as aviation and marine is reviewed. Also, the present conditions of available data in the filed of domestic railway are analysed, and then it provides plans for. establishing database to build up advanced railway system safety information management systems.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.2
• /
• pp.157-163
• /
• 2014

This paper proposes a two-stage step-down buck and a tapped-inductor boost cascaded converter for high efficiency photovoltaic micro-inverter applications. The proposed inverter is a new structure to inject a rectified sinusoidal current into a low-frequency switching inverter for single-phase grid with unity power factor. To build a rectified-waveform of the output current. the converter employs both of a high efficiency step-up and a step-down converter in cascade. In step-down mode, tapped inductor(TI) boost converter stops and the buck converter operates alone. In boost mode, the TI converter operates with the halt of buck operation. The converter provides a rectified current to low frequency inverter, then the inverter converts the current into a unity power-factor sinusoidal waveform. By applying a TI, the converter can decrease the turn-on ratios of the main switch in TI boost converter even with an extreme step-up operation. The performance validation of the proposed design is confirmed by an experimental results of a 120W hardware prototype.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.101-106
• /
• 1996

For the application of the neutron flux mapping, an accurate calculation of the sensitivity is required because the sensitivity is proportional to the neutron flux density. Sensitivity is defined as the current per unit length per unit neutron flux and it mainly depends on the depression factor(f), the escape probability from the emitter($\varepsilon$1) and the charge build-up factor of the insulator layer(c). A Monte Carlo simulation was accomplished to calculate the sensitivity of rhodium emitter material and alumina(Al$_2$O$_3$) insulator with a cylindrical geometry, based on the (n,${\beta}$) interaction and on other interaction including the secondary electron generation for the more accurate estimation of the sensitivity. From the simulation results, factors fur the sensitivity were accurately calculated and compared with other theoretical and experimental values. In addition, the sensitivity linearly increases and saturates as the emitter radius increases. The accomplished method is useful in the analysis for the change of SPND sensitivity as a function of burn-up and in the optimum design of SPND.

• Journal of Information Technology Services
• /
• v.20 no.5
• /
• pp.89-104
• /
• 2021

Food delivery service combined with IT technology and HMR (Home Meal Replacement) are rapidly growing due to the COVID-19. Recently, the demand for salads along with HMR has increased among office workers in their 20s and 30s who are interested in health and beauty. Freshcode is a food startup with 6 years of experience that started selling salad products through O2O service. Freshcode applied for a patent for a service that collects orders from nearby areas and delivers them on the same day to a designated delivery address 'FCOSPOT' to save shipping costs. In March 2021, in recognition of the growth potential of the regular delivery service, Freshcode received an investment of 6 billion won in Series A. This study may have practical implications to early-stage startups and scale-up stage startups through a longitudinal case study on the growth of a single company. As for the research method, the lean startup methodology and lean canvas were used in the early stage of startup. In particular, the process of the build-measure and learn feedback-loop, which is the core of lean startup methodology, was applied to each major decision-making step. In the scale-up stage after 5 years, the business model canvas was used to schematize the growth as a food online O2O platform to verify continuous innovation. This case study has three main findings. First, the idea of 'FCOSPOT' was successfully implemented through the Lean Startup methodology. Second, Freshcode demonstrated the scalability of the differentiated business model of shared base delivery O2O. Third, a key factor of success was the digital integrated communication operation strategy that maximizes the experience for the created customers.

• Culinary science and hospitality research
• /
• v.8 no.3
• /
• pp.39-56
• /
• 2002

This is the study to stir up importance in bakery and to present evaluation of menu goods in barkery of tourist hotels. In order to achieve the purpose of this paper, it is gone ahead of the literature review including the previous research on the manu goods evaluation of tourist hotels. The major field research is to build a frame of the paper and present the model to release my humble theory. The limitation of the study was to make much of literature basis due to insufficient previous research on the issue. This is an unprecedented study on bakery department in tourist hotels in Korea thus no research model was unavailable for cross reference or comparative research. The evaluation of bakery menu good is directly related to the satisfaction of tourist hotels bakery consumers and we need a substantial managerial development method of bakery menu goods. This study has two goals in line with the purpose of investigation, that is to say, by understanding vital statistics of consumer and influence factor were created, and finally the factors and consumers and professional worker identified. The study would be framed into 5 parts like introduction, literature review, inquiry a plan and analysis method, consequence and discussion & conclusion. After the exploitative research, the study was approached to make findings through the questionnaires designed to find the relationship factor between consumer's evaluation and professional worker's evaluation of bakery menu goods in tourist hotels.

• Journal of Advanced Navigation Technology
• /
• v.13 no.4
• /
• pp.566-576
• /
• 2009

The primary purpose of this study is not only to understand the concept of event service quality but also to identify the service experimental factor for the better measure of sales promotion event service quality. The major findings from the study were as follows: There was difference influence power in event service quality, the experimental factor is more important than prior service quality factors such as reliability, assurance, tangibles, empathy and responsiveness. Also, customer's satisfaction was influenced by their behavioral intention such as overall reusing intention and recommendation intention. In conclusion, this study is especially meaningful that experimental factor is more important than prior service quality factors and will help the airline marketing staff in charge to build up their strategy for maintaining customer. And it is hoped that this study has been helpful to comprehend relationship among the service quality factor that have strong effects on increasing airline's profitability.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.30-37
• /
• 2012

This paper presents the performance investigation and design technology of a Line Start-up Permanent Magnet Synchronous Motor (LSPMSM) with super premium efficiency, including a design consideration and evaluation for motor start-up, key performance, and advanced finite element analysis FEA) for the design, improvement and verification, prototype build and test, design and test data comparison with a $Premium^{(R)}$ Efficient Induction Motor (PEIM). To assess the design technology, the LSPMSM prototype was built amended from a PEIM with the same frame, stator punching and rated output. Based on the prototype test, two novel design improvements and analyses have been done to eliminate noise and vibration. Additionally, the comparisons with the PEIM on the power factor, efficiency, frame size and active material consumption indicated that a significant performance improvement and active material cost reduction can be achieved by the LSPMSM.

• The Journal of Korean Society for Radiation Therapy
• /
• v.14 no.1
• /
• pp.79-84
• /
• 2002

The main cause factor for effective the output, especially in small & irregular shaped field of electron beam therapy, are collimation system, insert block diameter and energy. In the absorption deose of treatment fields, we should consider the lateral build-up ratio (LBR), which the ratio of dose at a point at depth for a given circular field to the dose at the same point for a 'broad-field', for the same incident fluence and profile. The LBR data for a small circular field are used to extract radial spread of the pencil beam, ${\sigma}$, as a function of depth and energy. It's based on elementary pencil beam. We consider availability of the factor, ${\sigma}$, in the small & irregular fields electron beam treatment.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.24 no.2
• /
• pp.122-133
• /
• 2015

The requirements for the successful treatment of all-ceramic restorations are not so different from the ones of conventional restorations. "The provisional restoration followed by an adequate tooth reduction" and "the accurately fitting prostheses with corresponding to final impression" can be the examples of them. Nevertheless, the one which all-ceramic restorations are distinguished from conventional restorations is the additional procedure of so called "bonding". In addition to the application of resin cement between "inner surface of restoration and outer surface of abutment", bonding technology can be also applied to the treatment process of "Post and Core" in particular if the abutments are non-vital teeth. Core build-up for all-ceramic crown is conducted with fiber post and tooth colored composite by considering the properties of the restorations transmitting light. We know well that a vital abutment is easier than a non-vital one to get the targeted goals for clinical success in connection with esthetics and structure. The creation of "Post and Core" with bonding technique is a decisive factor for a long-term success if the abutment is non-vital tooth with dentinal collapse. I would like to share my clinical experience about "post & core build-up and all-ceramic restoration bonding" out of several success strategies of all-ceramic crown with this review article.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.2
• /
• pp.150-157
• /
• 1985

In terms of behavior of fatigue cracks propagated after build-up around the artificial drilled miro-hole, this study has been made of the build-up process of slips and micro cracks, behavior of micro-crack propagation and the definition of fatigue limit under the rotating bending stress with low carbon steel. The results of this study are as follows: (1) The fatigue limit is the repropagating critical stress for the nonpropagating cracks which have grown to some limit around the micro-hole in regard of the magnitude of micro-hole. (2) Behavior of the slips and micro-cracks initiation are occurring simultaneously in front and in rear of micro-hole tips in the view of the rotational direction, regardless of the magnitude of micro-hole. (3) Behavior of fatigue crack propagation is different from magnitude of micro-hole, its behavior is propagation of single crack about respectively large hole, but about respectively small hole, fatigue crack propagated joining phenomena of micro-cracks. (4) The behavior of fatigue fracture is affected by the factor of its defects in the view of magnitude of micro-hole when the diameter of the micro-holes are smaller than 50.mu.m, and this is also affected with the size effect of micro-hole diameter.