• 건축역사연구
• /
• 제26권3호
• /
• pp.39-49
• /
• 2017

It is difficult to build a hipped and gable roof in slender rectangular type due to restraint in variation of lateral length caused by gongpo arranged on the side, purlin space and the form of gable part and aesthetical effect of chunyeo maru. Against this backdrop and with the assumption that this phenomenon is more apparent in roofs of three-bay-kan Buddhist temples with the hipped and gable roof among national treasure Buddhist temples, this study has aimed to prove that a roof can be built in a less slender rectangular type than that of flat form and to present the building methodology and found the following findings. First, The ratio of lateral to longitudinal length of the roof has been adjusted by protruding the chunyeo and the method of adjusting the ratio of lateral to longitudinal length of the roof is considered to be determined depending on the availability of woods to be used in chunyeo. Second, in order to symmetrically arrange the edge of the roof, which is critical from the perspective of construction morphology, the chunyeo angle has been intentionally adjusted to reduce the gap of length between the front roof and the lateral roof. To sum up, the characteristic of the hipped and gable roof, which is difficult to be built in slender rectangular type, is more clearly shown in the roof and it is identified that the length of the front roof and the lateral roof has been intentionally adjusted to achieve the symmetrical arrangement of roofline of the roof edge.

• 한국의류산업학회지
• /
• 제8권3호
• /
• pp.317-325
• /
• 2006

The purposes of this study are to examine clothing businesses which are using dress forms and grasp the problems in apparel manufacturing process, to verify the size and shape of the dress forms for uniformity, to ascertain the uniformity between the dress forms being sold today and the somatotype of the target consumers. The following results were obtained. First, most of the clothing businesses used the existing dress forms in the company. The dress forms didn't reflect the somatotype of the current consumers. And the users satisfaction was below the average. Second, the size and shape of the dress forms being sold today had lack of uniformity between themselves. Third, the dress forms didn't reflect the shape characteristics as well as the size of the target consumers. Consequently, The dress forms need to have the following. First, It is necessary that the dress forms have various functions in a dress form in the future. Second, to get high satisfaction of clothing fit, we need to build up the data base of the consumers somatotype. The data base have to consist of not only circumference but also width, thickness, angle of the current consumers. Last, the further studies of the dress forms need to meet the clothing businesses demand.

• 한국농촌건축학회논문집
• /
• 제10권1호
• /
• pp.101-109
• /
• 2008

It is very hard to find out Tongbanga-millhouse installed nearby a streamlet to use water with Tongbanga(a kind of water-mill) to polish cereals by pounding like a visage of its old days. It plays an important part in folkloric, architectural and educational aspects. The purpose of this study is to analyse the architectural features of Tongbanga and millhouse itself so that to find the way how to build and fabricate the materials and frame members. Therefore this study has been focused on the composition principle and fabrication method of Tongbanga-millhouse on the side of architecture. The fabrication methods of its house in accordance with regular sequences are as follows. ${\cdot}$ Firstly the decision of location of Tongbanga-millhouse and Hwak(a big mortar made of stone). ${\cdot}$ Slantly three rafter installation at an angle of $50^{\circ}$ to err on the safe side and then slantly fifteen rafter installation making a circular cone shape. ${\cdot}$ Installation of twigs to be circles from bottom to top. ${\cdot}$ Manifoldly covering of trunks peeling the barks from flax plants. ${\cdot}$ Threefoldly thatching with upside barks of oak trees. ${\cdot}$ Placing woods alike rafter on the bark thatches as a weight not to fly away by wind. ${\cdot}$ Binding woods alike rafter with vines of arrowroots to maintain the proper place. The decayed Tongbanga-millhouse by means of upper ways was restored out of all recognition.

• Restorative Dentistry and Endodontics
• /
• 제40권3호
• /
• pp.229-235
• /
• 2015

Objectives: To determine and compare the fracture resistance of endodontically treated maxillary central incisors restored with different posts and cores. Materials and Methods: Forty-eight upper central incisors were randomly divided into four groups: cast post and core (group 1), fiber-reinforced composite (FRC) post and composite core (group 2), composite post and core (group 3), and controls (group 4). Mesio-distal and bucco-lingual dimensions at 7 and 14 mm from the apex were compared to ensure standardization among the groups. Twelve teeth were prepared for crown restoration (group 4). Teeth in other groups were endodontically treated, decoronated at 14 mm from the apex, and prepared for posts and cores. Resin-based materials were used for cementation in groups 1 and 2. In group 3, composite was used directly to fill the post space and for core build-up. All samples were restored by standard metal crowns using glass ionomer cement, mounted at $135^{\circ}$ vertical angle, subjected to thermo-mechanical aging, and then fractured using a universal testing machine. Kruskal-Wallis and Mann-Whitney U tests were used to analyze the data. Results: Fracture resistance of the groups was as follows: Control (group 4) > cast post and core (group 1) > fiber post and composite core (group 2) > composite post and core (group 3). All samples in groups 2 and 3 fractured in restorable patterns, whereas most (58%) in group 1 were non-restorable. Conclusions: Within the limitations of this study, FRC posts showed acceptable fracture resistance with favorable fracture patterns for reconstruction of upper central incisors.

• Advances in concrete construction
• /
• 제14권5호
• /
• pp.317-330
• /
• 2022

This paper investigated computationally and experimentally the interaction here between a notch as well as a micropore under uniaxial compression. Brazilian tensile strength, uniaxial tensile strength, as well as biaxial tensile strength are used to calibrate PFC2d at first. Then, uniaxial compression test was conducted which they included internal notch and micro pore. Experimental and numerical building of 9 models including notch and micro pore were conducted. Model dimensions of models are 10 cm × 10 cm × 5 cm. Joint length was 2 cm. Joints angles were 30°, 45° and 60°. The position of micro pore for all joint angles was 2cm upper than top of the joint, 2 cm upper than middle of joint and 2 cm upper than the joint lower tip, discreetly. The numerical model's dimensions were 5.4 cm × 10.8 cm. The fractures were 2 cm in length and had angularities of 30, 45, and 60 degrees. The pore had a diameter of 1 cm and was located at the top of the notch, 2 cm above the top, 2 cm above the middle, and 2 cm above the bottom tip of the joint. The uniaxial compression strength of the model material was 10 MPa. The local damping ratio was 0.7. At 0.016 mm per second, it loaded. The results show that failure pattern affects uniaxial compressive strength whereas notch orientation and pore condition impact failure pattern. From the notch tips, a two-wing fracture spreads almost parallel to the usual load until it unites with the sample edge. Additionally, two wing fractures start at the hole. Both of these cracks join the sample edge and one of them joins the notch. The number of wing cracks increased as the joint angle rose. There aren't many AE effects in the early phases of loading, but they quickly build up until the applied stress reaches its maximum. Each stress decrease was also followed by several AE effects. By raising the joint angularities from 30° to 60°, uniaxial strength was reduced. The failure strengths in both the numerical simulation and the actual test are quite similar.

• Steel and Composite Structures
• /
• 제46권3호
• /
• pp.319-334
• /
• 2023

Localizing damages is an essential task to monitor the health of the structures since they may not be able to operate anymore. Among the damage detection techniques, non-destructive methods are considerably more preferred than destructive methods since damage can be located without affecting the structural integrity. However, these methods have several drawbacks in terms of detecting abilities, time consumption, cost, and hardware or software requirements. Employing artificial intelligence techniques could overcome such issues and could provide a powerful damage detection model if the technique is utilized correctly. In this study, the crack localization in flat and folded plate structures has been conducted by employing a Backpropagated Artificial Neural Network (BPANN). For this purpose, cracks with 18 different dimensions in thin, flat, and folded structures having 15⁰, 30⁰, 45⁰, and 60⁰ folding angle have been modeled and subjected to free vibration analysis by employing the Classical Plate Theory with Finite Element Method. A Four-nodded quadrilateral element having six degrees of freedom has been considered to represent those structures mathematically. The first ten natural frequencies have been obtained regarding healthy and cracked structures. To localize the crack, the ratios of the frequencies of the cracked flat and folded structures to those of healthy ones have been taken into account. Those ratios have been given to BPANN as the input variables, while the crack locations have been considered as the output variables. A total of 500 crack locations have been regarded within the dataset obtained from the results of the free vibration analysis. To build the best intelligent model, a feature search has been conducted for BAPNN regarding activation function, the number of hidden layers, and the number of hidden neurons. Regarding the analysis results, it is concluded that the BPANN is able to localize the cracks with an average accuracy of 95.12%.

• 한국지리정보학회지
• /
• 제8권4호
• /
• pp.165-175
• /
• 2005

지리정보시스템(GIS)은 정보관리나 공간분석을 통해서 문화유적의 보존과 국토이용을 위한 목적에 유용하게 사용될 수 있다. 본 연구의 목적은 지리정보시스템을 이용하여 전국적으로 분포하는 요지유적의 위치를 입력하고, 입지특성을 분석하여, 분포지역을 예측하는데 있다. 이를 위하여 전국의 약 1,200개소 요지유적의 위치를 입력하였고, 각 위치별 입지분석(고도, 사변의 경사, 사변방향, 수계) 및 통계분석을 통해 요지의 입지특성을 해석하였다. 요지유적 분포는 1에서 5까지 등급화된 고도분포, 사변경사, 수계비고, 수계거리, 사변방향의 5개 변수에 대한 중첩분석결과에 의하여 결정되었다. 대전광역시 성북동 일대에 분포하는 요지유적을 대상으로 분포를 예측한 결과 조사지역의 산능선 하부와 충적평야에 이르는 중간지역에서 요지유적 분포 가능성이 높게 나타났으며, 야외에서 확인된 요지유적의 분포와도 일치하였다. 본 시범연구 결과 전국적으로 더 많은 요지분포 자료가 확보된다면 요지분포가 확인되지 않은 지역에 대한 분포 예측력이 보다 향상될 것으로 기대된다.

• Radiation Oncology Journal
• /
• 제3권2호
• /
• pp.145-151
• /
• 1985

Wedge filter를 사용할 때 $^{60}Co\;\gamma$선과 10MV X-선의 주변선량분포를 반자동식 물팬톰장치에 의해 제어되는 고체 방사선검출기로 측정하였다. wedge filter의 날과 등의 방향을 잇는 주단면상에서 주변선량을 측정하였다. 방사선의 투과력과 wedge 각, wedge에 대한 방향, 조사면의 변화에 대하여 주변선량의 면화를 고찰하였다. 선축에 수직인 방향의 측정은 깊이 dm, 5cm, 10cm, 15cm에서 선측과 평행인 방향에서는 조사면 경계에서 3cm, 5cm, 10cm 떨어진 위치에서 측정이 이루어졌다. 측정으로부터 wedge가 사용되는 조사면에 대한 주변선량분포가 아래와 같음을 볼 수 있었다. 1. wedge filter의 날의 방향의 주변선량이 등의 방향의 주변선량보다 높았다. 2. 표면근처에서는 깊이가 깊어짐에 따라 선량이 감소하였다. 3. $^{60}Co\;\gamma$선의 경우 어떤 깊이에서는 조사면의 경계로부터 거리가 떨어짐에 따라 주변선량이 단조감소하지 않고 다시 증가하는 영역이 있었다. 4. wedge를 사용하는 경우 주변선량은 방사선의 투과력이나 조사면의 크기뿐만 아니라 wedge의 각과 방향에도 영향을 받는다.

• 한국전자거래학회지
• /
• 제18권4호
• /
• pp.315-326
• /
• 2013

소셜 미디어에서는 상품평, 영화평 등의 다양한 종류의 의견이 표현되고 있으며, 사용자들이 물품 구매 등에 있어 이러한 의견을 참고로 하여 결정을 내리는 것은 일반적이 되었다. 하지만 의견 정보의 활용도가 높아질수록 이를 부적절하게 왜곡하는 사례 또한 증가하고 있다. 예를 들어, 홍보를 목적으로 과도하게 긍정적인 의견이 포함된 리뷰를 작성하거나, 반대로 일반적인 평가에서 벗어나 과도하게 부정적인 의견을 게시하는 경우 등이다. 편향된 의견은 소셜 미디어의 신뢰성과 연결 되기 때문에 이를 검출하는 것은 점차 중요한 문제로 대두되고 있다. 기존의 오피니언 마이닝 혹은 감성 분석은 문서를 분석하여 그 문서가 가지고 있는 의견의 성향을 판단하는 기법이다. 하지만 기존의 연구는 의견을 단순히 긍정/부정으로만 분류하는 방향으로 연구가 이루어져 왔으며, 특히 사전에 의견 성향에 따라 분류된 충분한 양의 학습 데이터가 필요하다는 단점이 있다. 본 논문에서는 학습데이터가 없는 경우에, 전체 문서의 의견 성향 분포에서 벗어난 의견 문서를 검출하는 기법을 제안한다. 여기에는 각도기반 이상치 탐지와, 개인화된 페이지랭크 방법을 활용한다. 또한 영화 리뷰 문서를 대상으로 실험을 수행하여 제안한 방법들의 성능을 분석하였다.

• 방송공학회논문지
• /
• 제19권3호
• /
• pp.396-404
• /
• 2014

의류 검색 분야는 의류의 비정형 특성으로 인해 매우 어려운 분야로 인식 오류 및 연산량을 줄이기 위한 노력이 많이 진행되어 왔으나 이를 위한 학습 및 인식 과정 전체에 대한 구체적인 사례가 없고 일부 관련 기술들은 아직 많은 한계를 보이고 있다. 이에 본 논문에서는 입력된 영상에서 사람 객체를 파악하여 착용한 의상으로부터 색상, 무늬, 질감 등 의상이 가질 수 있는 특성 정보를 분석하여, 이를 분류하고 검색하는 방법에 대한 전 과정을 구체적으로 보였다. 특히, 의류의 패턴 및 무늬 등을 구분하기 위한 비정형 의류 검색을 위한 LBPROT_35 디스크립터를 제안하였다. 이 제안 방식은 영상의 통계적 특징을 분석하는 기존의 LBP_ROT(Local Binary Pattern with ROTation-invariant) 방식에 추가로 원 영상에 크기 변화가 생겨도 검색해 낼 수 있도록 하는 특성이 추가된 것이며, 이를 통해 비정형 의류 검색 시 옷이 회전되어 있거나 스케일에 변화가 있어도 높은 검색율을 얻을 수 있게 되었다. 또한 색 공간을 11개의 구간으로 양자화 하는 방식을 이용하여 컬러 분류를 구현하여, 의류 검색에 있어서 중요한 컬러 유사성을 상실하지 않도록 하였다. 한편, 인터넷 상의 의류 사진들로부터 추출한 총 810장의 트레이닝 이미지로 데이터베이스를 구축하고 이들 중 36장을 질의영상으로 테스트 한 결과, 94.4%의 인식률을 보이는 등 Dense-SIFT 대비 높은 인식률을 보였다.