• 대한전기학회논문지:전력기술부문A
• /
• 제51권4호
• /
• pp.163-168
• /
• 2002

This paper present a new verb efficient numerical algorithm for arcing faults detection and fault distance estimation in transmission line. It is based on the fundamental differential equations describing the transients on a transmission line before, during and alter the fault occurrence, and on the application of the "Least Error Squares Technique"for the unknown model parameter estimation. If the arc voltage estimated is a near zero, the fault is without arc, in other words the fault is permanent fault. If the arc voltage estimated has any high value, the faust is identified as an fault, or the transient fault. In permanent faults case, fault distance estimation is necessary. This paper uses the model of the arcing fault in transmission line using ZnO arrestor and resistance to be implemented within EMTP. One purpose of this study is to build a structure for modeling of arcing fault detection and fault distance estimation algorithm using Matlab programming. In this paper, This algorithm has been designed in Graphic user interface(GUI).

• 전기전자학회논문지
• /
• 제1권1호
• /
• pp.47-54
• /
• 1997

오늘날 통신은 인터넷 사용의 증가 멀티미디어 서비스의 요구등으로 인해 점차 다량의 정보를 정확하고 신속하게 전송하기 위한 고속의 데이터 전송시스템이 요구되고 없으며, 머지않아 지구상공 20km 지점의 성층권에 플랫폼이라 불리는 위성을 띄워 고속의 정보 서비스가 가능할 것이다. 이 시스템은 레이저광을 사용함으로써 높은 데이터 전송율을 갖는 광무선통신망을 구축할 수 있으나, 대기공간을 전송채널로 사용하기 때문에 대기효과로 인한 극복해야할 많은 문제점을 갖고 있다. 따라서 본 논문에서는 교란대기 하에서 교란대기 효과에 따른 데이터 전송율과 비트오류율을 제시함으로써 교란대기효과가 광 위성통신시스템에 미치는 영향을 고찰하고자 한다.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.279-285
• /
• 2009

Prediction of glucose concentration in the interstitial fluid (ISF) based on mid-infrared absorption spectroscopy was examined at the glucose fundamental absorption band of 1000 - 1500/cm (10 - 6.67 um) using multi-component analysis. Simulated ISF samples were prepared by including four major ISF components. Sodium lactate had absorption spectra that interfere with those of glucose. The rest NaCl, KCl and $CaCl_2$ did not have any signatures. A preliminary experiment based on Design of Experiment, an optimization method, proved that sodium lactate influenced the prediction accuracy of glucose. For the main experiment, 54 samples were prepared whose glucose and sodium lactate concentration varied independently. A partial least squares regression (PLSR) analysis was used to build calibration models. The prediction accuracy was dependent on spectrum preprocessing methods, and Mean Centering produced the best results. Depending on calibration sample sets whose sodium lactate had different concentration levels, the standard error prediction (SEP) of glucose ranged $17.19{\sim}21.02\;mg/dl$.

• International journal of advanced smart convergence
• /
• 제9권2호
• /
• pp.90-104
• /
• 2020

It is difficult for non-experts to build machine learning (ML) models at the level that satisfies their needs. Deep learning models are even more challenging because it is unclear how to improve the model, and a trial-and-error approach is not feasible since training these models are time-consuming. To assist these novice users, we examined how interactive and explainable feedback while training a deep learning network can contribute to model performance and users' satisfaction, focusing on the data preparation process. We conducted a user study with 31 participants without expertise, where they were asked to improve the accuracy of a deep learning model, varying feedback conditions. While no significant performance gain was observed, we identified potential barriers during the process and found that interactive and explainable feedback provide complementary benefits for improving users' understanding of ML. We conclude with implications for designing an interface for building ML models for novice users.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.505-508
• /
• 1997

In this paper, an auto-tuning method for fuzzy controller based on the neural network is presented. The backpropagated error of neural emulator offers the path which reforms the fuzzy controller's membership functions and fuzzy rule, and used for speed control of induction motor. For the torque control method, an indirect vector control scheme with slip calculation is used because of its stable characteristics regardless of speed. Motor input current is regulated by a current controlled voltage source PWM inverter using space voltage vector technique. Also, the scheme of current control fuzzy controller is synchronous reference frame with decoupling term. DSP(TMS320C31) is used to achieve the high speed calculation of the space voltage vector PWM and to build the self-learning fuzz. control algorithm. An IPM is used to simplify hardware design.

• 대한산업공학회지
• /
• 제40권3호
• /
• pp.283-290
• /
• 2014

In the flat panel display industry, to meet production target quantities and the deadline of production, the scheduler and dispatching systems are major production management systems which control the order of facility production and the distribution of WIP (Work In Process). Especially the delivery time is a key factor of the dispatching system for the time when a lot can be supplied to the facility. In this paper, we use survival analysis methods to identify main factors of the delivery time and to build the delivery time forecasting model. To select important explanatory variables, the cox proportional hazard model is used to. To make a prediction model, the accelerated failure time (AFT) model was used. Performance comparisons were conducted with two other models, which are the technical statistics model based on transfer history and the linear regression model using same explanatory variables with AFT model. As a result, the mean square error (MSE) criteria, the AFT model decreased by 33.8% compared to the statistics prediction model, decreased by 5.3% compared to the linear regression model. This survival analysis approach is applicable to implementing the delivery time estimator in display manufacturing. And it can contribute to improve the productivity and reliability of production management system.

• 한국시스템다이내믹스연구
• /
• 제3권2호
• /
• pp.49-68
• /
• 2002

The intent of this study is to develop system dynamics model for assessment of organizational and human factors in nuclear power plant which can contribute to secure the nuclear safety. Previous studies are classified into two major approaches. One is engineering approach such as ergonomics and probability safety assessment(PSA). The other is social science approach such like sociology, organization theory and psychology. Both have contributed to find organization and human factors and to present guideline to lessen human error in NPP. But, since these methodologies assume that relationship among factors is independent they don't explain the interactions among factors or variables in NPP. To overcome these limits, we have developed system dynamics model which can show cause and effect among factors and quantify organizational and human factors. The model we developed is composed of 16 functions of job process in nuclear power, and shows interactions among various factors which affects employees' productivity and job quality. Handling variables such like degree of leadership, adjustment of number of employee, and workload in each department, users can simulate various situations in nuclear power plant in the organization side. Through simulation, user can get insight to improve safety in plants and to find managerial tools in the organization and human side. Analyzing pattern of variables, users can get knowledge of their organization structure, and understand stands of other departments or employees. Ultimately they can build learning organization to secure optimal safety in nuclear power plant.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.802-811
• /
• 1996

Farmers need alternatives for weed control due to the desire to reduce chemicals used in farming. However, conventional mechanical cultivation cannot selectively remove weeds located in the seedline between crop plants and there are no selective heribicides for some crop/weed situations. Since hand labor is costly , an automated weed control system could be feasible. A robotic weed control system can also reduce or eliminate the need for chemicals. Currently no such system exists for removing weeds located in the seedline between crop plants. The goal of this project is to build a real-time , machine vision weed control system that can detect crop and weed locations. remove weeds and thin crop plants. In order to accomplish this objective , a real-time robotic system was developed to identify and locate outdoor plants using machine vision technology, pattern recognition techniques, knowledge-based decision theory, and robotics. The prototype weed control system is composed f a real-time computer vision system, a uniform illumination device, and a precision chemical application system. The prototype system is mounted on the UC Davis Robotic Cultivator , which finds the center of the seedline of crop plants. Field tests showed that the robotic spraying system correctly targeted simulated weeds (metal coins of 2.54 cm diameter) with an average error of 0.78 cm and the standard deviation of 0.62cm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권1호
• /
• pp.360-373
• /
• 2017

This paper presents a novel digital video steganalysis scheme against the spatial domain video steganography technology based on a spatial temporal detector (ST_D) that considers both spatial and temporal redundancies of the video sequences simultaneously. Three descriptors are constructed on XY, XT and YT planes respectively to depict the spatial and temporal relationship between the current pixel and its adjacent pixels. Considering the impact of local motion intensity and texture complexity on the histogram distribution of three descriptors, each frame is segmented into non-overlapped blocks that are $8{\times}8$ in size for motion and texture analysis. Subsequently, texture and motion factors are introduced to provide reasonable weights for histograms of the three descriptors of each block. After further weighted modulation, the statistics of the histograms of the three descriptors are concatenated into a single value to build the global description of ST_D. The experimental results demonstrate the great advantage of our features relative to those of the rich model (RM), the subtractive pixel adjacency model (SPAM) and subtractive prediction error adjacency matrix (SPEAM), especially for compressed videos, which constitute most Internet videos.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.251-252
• /
• 2010

최근 항공측량분야에서 항공디지털카메라 및 항공레이저측량시스템은 DEM제작 및 지형분석 등의 지리정보 구축에 활용되고 있다. 본 연구에서는 ALS50II에 포함된 중형CCD카메라인 RCD105에 대한 3차원 위치정확도를 고해상도 항공디지털카메라인 DMC와 비교하였다. 이를 위해 촬영지역을 선정 및 항공사진촬영을 실시하였으며 1/1,000 수치지형도에서 지상기준점을 선점하였다. RCD105와 DMC에 대해 항공삼각측량 후 최소제곱오차(RMSE)를 비교하였다.