• Journal of the Korean Chemical Society
• /
• v.38 no.3
• /
• pp.200-207
• /
• 1994

A biosensor for the measurement of L-glutamine has been constructed by immobilizing the slice of Wistar rat kidney and it's organelle on $NH_3$ gas-sensing electrode. The effects of pH, buffer solution, temperature and thickness of slice were investigated in order to optimize electrode response. The tissue sensor had the linearity in the range of L-glutamine concentration $8.0{\times}10^{-5}{\sim}1.0{\times}10^{-2} M$ with a slope of 53.8 mV/decade in 0.05 M phosphate buffer solution, pH 7.8 at $30^{\circ}C$, and optimum thickness of slice and response time were 30 ${\mu}m$ and 3∼5 min, respectively. The organelle sensor showed the linearity within L-glutamine concentration range of $1.2{\times}10^{-4}{\sim}5.0{\times}10^{-3} M$ with a slope of 54.0 mV/decade in 0.05 M phosphate buffer solution, pH 7.8 at $30^{\circ}C$, and response time was 6∼7 min, respectively. Thus, it is clear that the tissue and organelle sensor will be useful for L-glutamine measurements.

• Journal of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.29-33
• /
• 1963

A new method determining the micro amount of cupferron spectrophotometrically was investigated and was considered on the various factors which affect on the method. The method was as follows; ferric alum solution was added in a suitably acidified solution of cupferron. After the precipitates of Fe(Ⅲ)-cupferrate were formed, they were extracted with chloroform and the absorbancy of the organic phase was measured by spectrophotometer, Beckmann Model B (1cm quartz cell). The stable maximum wavelength was 325 $m{\mu}$ at 3.0 to 5.6 of the optimum pH and it obeyed on Boer's law in the range of 5.76 ${\gamma}/ml$ to 74.80 ${\gamma}/ml$ of cupferron. The maximum wavelength was independent on pH, concentration of cupferron and of ferric alum. The absorbancy at 325 $m{\mu}$ was not affected by $SO_4^{--}$ and Ac, but was varied by $Cl^-$ and $NO_3^-$. Sulfuric acid and acetate buffer are preferred to the acid and buffer solution adjusting the pH. At higher acidity, however, the absorbancy was somewhat lowered because of the decomposition of cupferron, and at too high concentration of ferric alum, it was also decreased because of the difficulty in the extraction. By this method, it was able to determine cupferron quantitatively in the percent error of 1.18.

• YAKHAK HOEJI
• /
• v.52 no.6
• /
• pp.426-433
• /
• 2008

The interaction of cadmium (II) ion with protocatechuic acid ($H_3PA$) and ethylenediaminetetraacetic acid (EDTA) were investigated in aqueous solution at different pH. The protocatechuic acid and EDTA/cadmium stochiometries for cadmium (II) binding have been determined by UV-vis spectrophotometric method. The complexation of Cd (II) ion with protocatechuic acid was formed in solution. Among the two potential sites of chelation present in the protocatechuic acid structure, the carboxylic function presents higher complexation power toward Cd (II). 1 : 1 Cd (II)-complex had a maximum absorbance and showed the bathochromic shift of the long-wavelength band of the UV-vis spectra in the alkaline pH when interacted with protocatechuic acid in 0.2 M $NH_3$ - 0.2 M ${NH_4}Cl$ (pH 8.0) buffer. These results suggest that Cd $({H_2}PA)^+$ complex has the optimal condition of chelation in buffer solution at 64.22 ${\mu}M$ protocatechuic acid (A=1.01455).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4A
• /
• pp.489-495
• /
• 2000

In this paper we propose an approximate method to estimate the cell loss probability(CLP) due to buffer overflow in ATM networks. The main idea is to relate the buffer capacity with the CLP target in explicit formula by using the approximate upper bound for the tail distribution of a queue. The significance of the proposition lies in the fact that we can obtain the expected CLP by using only the source traffic data represented by mean rate and its variance. To that purpose we consider the problem of estimating the cell loss measures form the statistical viewpoint such that the probability of cell loss due to buffer overflow does not exceed a target value. In obtaining the exact solution we use a typical matrix analytic method for GI/D/1B queue where B is the queue size. Finally, in order to investigate the accuracy of the result, we present both the approximate and exact results of the numerical computation and give some discussion.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.2
• /
• pp.115-123
• /
• 2010

We present an efficient algorithm for computing the Hausdorff distance between two planar curves. The algorithm is based on an efficient trimming technique that eliminates the curve domains that make no contribution to the final Hausdorff distance. The input curves are first approximated with biarcs within a given error bound in a pre-processing step. Using the biarc approximation, the distance map of an input curve is then approximated and stored into the graphics hardware depth-buffer by rendering the distance maps (represented as circular cones) of the biarcs. We repeat the same procedure for the other input curve. By sampling points on each input curve and reading the distance from the other curve (stored in the hardware depth-buffer), we can easily estimate a lower bound of the Hausdorff distance. Based on the lower bound, the algorithm eliminates redundant curve segments where the exact Hausdorff distance can never be obtained. Finally, we employ a multivariate equation solver to compute the Hausdorff distance efficiently using the remaining curve segments only.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.125-129
• /
• 2001

NiO buffer layers were deposited on texture Ni tapes fur YBCO coated conductors by MOCVD(metal organic chemical vapor deposition) method, using a single solution source. Variables were deposition temperature and flow rate of $0_2$carrier gas. At higher temperatures, The NiO(111) texture was well developed, but the NiO(200) texture was developed at low temperatures. The best result was obtained at the deposition temperature of$ 470^{\circ}C$ and the gas flow rate of 200 sccm. FWHM value of $\omega$-scan fur NiO(200) of the film and $\Phi$-scan for NiO(111) of the film was $4.2^{\circ}$ and $7^{\circ}$, respectively.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.31 no.1
• /
• pp.1-13
• /
• 2006

In this paper we consider a design problem of a cyclic queueing network with two stages, each with a local buffer of limited capacity. Based on the theory of reversibility and product-form solution, we derive the throughput function of the network as a key performance measure to maximize. Two cases are considered. In case each stage consists of a single server, an optimal allocation policy of a given buffer capacity and work load between stages as well as the optimal number of customers is identified by exploiting the properties of the throughput function. In case each stage consists of multiple servers, the optimal policy developed for the single server case doesn't hold any more and an algorithm is developed to allocate with a small number of computations a given number of servers, buffer capacity as well as total work load and the total number of customers. The differences of the optimal policies between two cases and the implications of the results are also discussed. The results can be applied to support the design of certain manufacturing and computer/communication systems.

• Journal of Environmental Science International
• /
• v.17 no.5
• /
• pp.509-516
• /
• 2008

New functional surfactant, N,N-dimethyl-N-dodecyl-N-(2-methyl benzimidazoyl) ammonium chloride(DDBAC) having benzimidazole(BI) functional group have been synthesized and the critical micellar concentration of DDBAC measured by surface tentiometry and electric conductivity method was $8.9{\times}10^{-4}M$. Micellar effects in DDBAC functional surfactant solution on the hydrolysis of p-nitrophenylacetate(p-NPA), p-nitro-phenylpropionate(p-NPP) and p-nitrophenylvalerate(p-NPV) were observed with change of various pH (Tris-buffer). The pseudo first rate constants of hydrolysis of p-NPA, p-NPP and p-NPV in optimum concentration of DDBAC solution increase to about 160, 280 and 600 times, respectively, as compared with those of aqueous solution at pH 8.00(Tris-buffer). It is considered that benzimidazole functional moiety accelerates the reaction rates of hydrolysis because they act as nucleophile or general base. In optimum concentration of DDBAC solution, the rate constants of hydrolysis of p-NPP and p-NPV increase to about 1.5 and 3.0 times, respectively, as compared with that of p-NPA. It means that the more the carbon numbers of alkyl group of substrates, the larger the binding constants between DDBAC micelle and substrates are. To know the hydrolysis mechanism of p-NPCE(p-NPA, p-NPP and p-NPV), the deuterium kinetic isotope effects were measured in $D_2O$ solutions. Consequently the pseudo first order rate constant ratios in $H_2O$ and $D_2O$ solution, $k_{H_2O}/k_{D_2O}$, were about $2.8{\sim}3.0$ range. It means that the mechanism of hydrolysis were proceeded by nucleophile and general base attack in approximately same value.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.4
• /
• pp.313-321
• /
• 1997

Ion exchange resin complexes of famotidine have been prepared by the reaction of famotidine solution with activated ion exchange resins. Complex formation efficiency between famotidine and ion exchange resin was about $80{\sim}90%$ in average, calculated by HPLC determination. Drug release characteristics from the resin complexes were evaluated by the modified percolation method. Famotidine release was dependent on the type of ion exchange resins. In the case of weakly acidic resin complexes, the cumulative released amount of famotidine was more than 90% for 1hr in pH 1.2 buffer solution. However, in the case of strongly acidic resin complexes, it was less than 5% for 3hr in the same medium. Strongly acidic resins revealed some advantages over weakly, acidic resins for overcoming instability of famotidine in gastric juice. In addition, strongly acidic resin complexes showed controlled release of famotidine in pH 6.8 buffer solution, showing the result of about 60 to 70% of drug release for 5hr. After oral administrations of famotidine-resin complexes to rats as dose of 40 mg equivalent/kg, the pharmacokinetic parameters of famotidine were obtained by model independent analysis and compared with those of famotidine solution or suspension. $C_{max}$ of famotidine-resin complex was lower than that of famotidine solution or suspension. MRT, MAT, and MDT of the complexes were greater than those of famotidine solution or suspension. From these results, it was expected that famotidine was released slowly from the complexes and absorbed continuously into systemic circulation. It was recognized that drug release from the complexes was the rate-limiting step in drug absorption, since there were close correlations between in vitro drug release and in vivo pharmacokinetic parameters.

• KSBB Journal
• /
• v.13 no.1
• /
• pp.77-82
• /
• 1998

Glutathione(L-$\gamma$ -glutamyl-L-cysteinylglycine, GSH) produced by microbial enzymes was separated by a liquid chromatography. In order to select a resin which would bind GSH efficiently, a batch adsorption experiment was carried out with GSH solution and various resins at pH 8.0 GSH bound to Q-sepharose and QAE-sephadex among anion exchange resins, but the latter was found not to be suitable because of the reduction of resin volume at high salt concentration. Preliminary experiments using a standard solution were carried out to separate GSH. GSH and $\gamma$ -glutamylcysteine were separated from the other constituents by applying step gradient of salt(NaCl) concentration. GSH was successfully separated from $\gamma$ -glutamylcysteine by applying Tris buffer containing 35mM NaCl. Chromatographic separation behaviors for the enzymatic product was similar to that for the standard solution. Separation yields of GSH from the standard solution and enzymatic product solution were 72.6% and 84.4%, respectively.