• Current Photovoltaic Research
• /
• 제1권2호
• /
• pp.115-121
• /
• 2013

ZnO film has been used for CIGS solar cells as a buffer layer as itself or by doping Mg and Sn; ZnO film also has been used as a transparent conducting layer by doping Al or B for solar cells. Since ZnO itself is a host material for many applications it is necessary to understand the electrical and optical properties of ZnO film itself with various preparation conditions. We prepared ZnO films by converting ZnS precursor into ZnO film by thermal annealing. ZnO film was formed at low temperature as low as $500^{\circ}C$ by annealing a ZnS precursor layer in air. In the air annealing, the electrical resistivity decreased monotonically with increasing annealing temperature; the intensity of the green photoluminescence at 505 nm increased up to $750^{\circ}C$ annealing. The electrical resistivity further decreased and the intensity of green emission also increased in reducing atmospheres. The results suggest that deep-level defects originated by oxygen vacancy enhanced green emission, which reduce light transmittance and enhance the recombination of electrons in conduction band and holes in valence. More oxidizing environment is necessary to obtain defect-free ZnO film for higher transparency.

• 대한수의학회지
• /
• 제39권3호
• /
• pp.513-522
• /
• 1999

DNA hybridization assay using probes prepared from liver was carried out to identify species characterization of the domestic animals. Gel electrophoresis showed that the target DNA extracted from raw muscle were 1kb and uniform pattern while fragments size of heated muscle were irregular. Hybridization was performed by adding 200ng/ml probe in hybridization solution and incubating for 12 hours at $68^{\circ}C$. To obtain good discrimination, applied washing buffer and washing step differently depending on the species. The probes of pig, horse and dog formed the specific hybrids with each target DNA respectively. Although cross reaction was detected in cattle, goat and sheep but signal intensity among these species made the discrimination possible each other. Such pattern was the same in the cases of chicken, turkey and duck. The hybridization pattern of heated muscle was similar to that of raw muscle in general, but the signal intensity was inferior to that of raw muscle. Species identification between closely related animal species, hybridized using the target DNA of such closely related animal species as a blocking agent, remarkable increase of discrimination from the evident decrease of non specific reaction compared with the control group. In addition, in the admixture where certain meat was included in the beef, pork, chicken meat, we could find whether any unjust meat was admixed or not. In this case, detection limit of certain meat in admixture was 1%.

• Corrosion Science and Technology
• /
• 제2권2호
• /
• pp.68-74
• /
• 2003

The effects of Niobium on the structure and properties(especially electric properties) of passive film of Zirconium alloys in pH 8.5 buffer solution are examined by the photo-electrochemical analysis. For Zr-xNb alloys (x = 0, 0.45, 1.5, 2.5 wt%), photocurrent began to increase at the incident energy of 3.5 ~ 3.7 eV and exhibited the $1^{st}$ peak at 4.3 eV and the $2^{nd}$ peak at 5.7 eV. From $(i_{ph}hv)^{1/2}$ vs. hv plot, indirect band gap energies $E_g{^1}$= 3.01~3.47 eV, $E_g{^2}$= 4.44~4.91 eV were obtained. With increasing Nb content, the relative photocurrent intensity of $1^{st}$ peak significantly increased. Compared with photocurrent spectrum of thermal oxide of Zr-2.5Nb, It was revealed that $1^{st}$ peak in photocurrent spectrum for the passive film formed on Zr-Nb alloy was generated by two types of electron transitions; the one caused by hydrous $ZrO_2$ and the other created by Nb. Two electron transition sources were overlapped over the same range of incident photon energy. In the photocurrent spectrum for passive film formed on Zr-2.5Nb alloy in which Nb is dissolved into matrix by quenching, the relative photocurrent intensity of $1^{st}$ peak increased, which implies that dissolved Nb act as another electron transition source.

• KSBB Journal
• /
• 제26권5호
• /
• pp.471-476
• /
• 2011

Nowadays biodiesel (fatty acid methyl ester, FAME) has been becoming an important issue as a desired alternative of energy products because of non-toxic, biodegradable properties, and lower exhaust emissions. During esterification of fatty acids or transesterification of oils and fats with short chain alcohols by the alkali-catalyzed methanolysis, FAME and unrefined glycerol are generated. Quantification of glycerol as a by-product is important because of a determinant of biodiesel quality. However, the glycerol analysis by gas chromatography (GC) method has laborious works with sample preparation, long time and cost of sample analysis. Thus, there is a need to analyze glycerol more simply. Herein we demonstrate that the colorimetric assay for glycerol analysis conducted by UV-vis spectrophotometer at the wavelength 617 nm whose peak is maximum intensity of malachite green, resulting in the red-shift occurred proportionally as a function of glycerol amount. Thus, it is considered the solvent media for malachite green fading for biodiesel production: (1) water, (2) MeOH, and (3) EtOH. The resulting findings show that the peak intensity at 617 nm in glycerol-malachite green mixture had a relationship between glycerol concentration and degree of peak shift as increase in pure glycerol concentration approximately at pH 7.0. However, when it was measured the unrefined glycerol concentration by diluting and adjusting with water to buffer (pH 7.0), it was not observed the absorption peak at 617 nm because of impurities and OH ions. In case of glycerol from biodiesel production factories, glycerol concentration could be successfully measured.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권8호
• /
• pp.1292-1296
• /
• 2007

To investigate the gel properties of surimi-like materials (SLM) made from pig heart (PH), psoas major muscle (PM) and semimembranosus muscle (SM) of pigs, the three muscles were diced, chopped and washed with 25 mM sodium phosphate buffer (pH 7.0) to extract myofibrillar protein. SLM from SM had significantly (p<0.05) higher moisture content and lower crude protein content compared with PH and PM samples. The cooked SLM from PH was darker than that from PM and SM. Gel from PH had significantly (p<0.05) lower L* and hue values, and higher b* and chroma values compared to gels from PM and SM. The cooked SLM from PH had poor water-holding capacity (WHC) resulting in higher cooking loss. SDS-PAGE showed that the bands of myosin and tropomyosin/troponin had reduced staining intensity in the PH sample, and some unidentified bands that were not in PM and SM samples were observed in PH samples.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.1985-1989
• /
• 2013

A simple colorimetric and fluorescent anion sensor 1 based on salicylimine showed a high selectivity and sensitivity for detection of cyanide in aqueous solution. The receptor 1 showed high selectivity toward $CN^-$ ions in a 1:1 stoichiometric manner, which induces a fast color change from colorless to orange and a dramatic enhancement in fluorescence intensity selectively for cyanide anions over other anions. Such selectivity resulted from the nucleophilic addition of $CN^-$ to the carbon atom of an electron-deficient imine group. The sensitivity of the fluorescence-based assay (0.06 ${\mu}M$) is below the 1.9 ${\mu}M$ suggested by the World Health Organization (WHO) as the maximum allowable cyanide concentration in drinking water, capable of being a practical system for the monitoring of $CN^-$ concentrations in aqueous samples.

• Advances in Traditional Medicine
• /
• 제8권2호
• /
• pp.178-186
• /
• 2008

In this study, ionotropic gelation method was used for the preparation of ibuprofen-loaded calcium alginate (CALG) and ethylenediamine (EDA) treated calcium alginate (EDA-CALG) microspheres. The effect of EDA-treatment on drug entrapment efficiency, particle size, morphology, swelling behavior and in vitro release characteristics of the microspheres was investigated by varying its concentration from 0.5 to 2% (v/v). The reduction in drug entrapment efficiency by a maximum of 44.60% was noted for EDA-CALG microspheres compared to untreated CALG microspheres. The particle size and swelling index of EDA-CALG microspheres were reduced with increasing EDA concentration. All the microspheres were observed to retain their spherical shapes with rough surfaces. EDA-CALG microspheres prepared using 1% and 2% v/v EDA, released almost all of its content within 7 h in pH 6.8 phosphate buffer, however, CALG microspheres were found to release the same within 3 h. The intensity of melting endothermic peak of ibuprofen reduced significantly at lower drug load as experienced from DSC thermograms. The FT-IR spectrum of pure ibuprofen, ibuprofen-loaded CALG and EDA-CALG microspheres showed the characteristic band of C = O stretching vibration of ibuprofen. Hence, this study revealed that EDA can be employed for the preparation of ibuprofen-loaded CALG microspheres to retard the drug release to some extent.

• 한국환경과학회지
• /
• 제6권5호
• /
• pp.497-503
• /
• 1997

This study was performed to Investigate the utilization of waste concretes for neutralization and removal of heavy metals In plating wastewater, because waste concretes have been known to be very porous, to have high species surface area and to have alkaline minerals such as calcium. The results obtained from this research showed that waste concretes had a buffer capacity to neutralize an acidic alali system in plating wastewater. Generally, neutralization and removal rate of heavy metals were excellent in the increase of waste concrete amounts and a small size. Because a coefficient of correlation was high, it seemed that removal of heavy metals could be explained by Freundlich and Langmuir isotherms. If we reflected the adsorption capacity(k) and adsorption intensity(1/n) of Freundlich isotherm, we couldn't consider waste concretes as a good adsorbent. But, we could know that waste concretes were capable of removing a part of heavy metals. In point of building waste debris, if waste concretes substituted for a valuable adsorbent such as actuated carbon, they could look forward to an expected economical effect.

• 한국진공학회지
• /
• 제9권2호
• /
• pp.116-121
• /
• 2000

Molecular beam epitaxy(MBE)로 성장시킨 $Al_{0.24}Ga$$_{0.76}As/GaAs$ 에피층 구조의 표면 광전압을 측정하였다. 측정된 신호로부터 구한 $Al_{0.24}Ga$$_{0.76} As/GaAs$ 에피층, GaAs 기판 그리고 GaAs 완충층의 밴드갭 에너지는 각각 1.72, 1.40 그리고 1.42 eV이다. 이는 phoareflectance(PR) 측정 결과와 잘 일치하였다 그리고 $Al_{0.24}Ga $_{0.76} As/GaAs$ 에피층이 GaAs기판의 표면 광전압세기 보다 약 3배 정도 작게 나타났는데 이는 캐리어의 이동도 차이로 나타나는 현상으로 해석된다. 또한 표면 광전압의 온도 의존성으로부터 Varshni 식의 계수들을 구하였다.

• 한국결정성장학회지
• /
• 제7권2호
• /
• pp.341-348
• /
• 1997

2원동시 RF magnetron 방법을 이용하여 조건별(sputtering gas압력, buffer충 유무 및 etching여부 등)로 제작된 Pt/co 인공격자 다층막 ([$Pt10.7\AA/Co2.8{\AA}{\times}{12}$])의 구조정보에 대하여 알아보았다. 다층막 구조평가는 X선 회절측정을 이용하여 행하였으며 구조에 대한 정보를 보다 면밀하게 평가하기 위해서 다층막 모델을 제작하여 얻어진 결과를 실험결과와 비교분석 하였다. 제작된 다층막 구조모델의 계산결과를 실측치와 비교하면 peak의 위치나 회절강도가 상당히 일치하였으며 이것은 구조모델이 실제의 Pt/Co 인공격자 다층막구조를 잘 반영하고 있음을 알 수 있었다.