• 한국강구조학회 논문집
• /
• 제18권5호
• /
• pp.597-606
• /
• 2006

섬유강화 플라스틱은 강재의 단점을 보완할 수 있는 다양한 장점을 가지고 있기 때문에 현재 건설구조재로 사용하기 위한 연구가 활발히 진행되고 있다. 본 연구는 펄트루젼 FRP를 구조압축재로 사용하기 위한 설계식의 개발에 관한 연구의 일부로서 설계강도에 가장 큰 영향을 미치는 요소 중 국부좌굴거동에 관한 연구이다. 직교이방성 판요소로 구성된 압축부재의 설계에서 국부좌굴의 발생 여부, 국부좌굴을 주도하는 판요소의 구별 등은 매우 중요한 설계요소이며, 이러한 거동을 정밀해법에 의해 계산하기란 매우 복잡하고 난해하다. 따라서, 본 연구에서는 펄트루젼 압축부재의 설계규준 개발을 위해 필요한 국부좌굴계수를 정밀해법, 에너지법, 매개변수 해석 등의 방법을 적용하여 정확하면서도 쉽게 직교이방성판의 좌굴계수와 펄트루젼 압축부재의 국부좌굴계수를 계산할 수 있는 근사식을 제안하였으며 제안된 근사식을 사용하여 펄트루젼 압축부재의 국부좌굴발생 여부 및 국부좌굴을 주도하는 판요소를 구별할 수 있는 방법을 제안하였다.

• Structural Engineering and Mechanics
• /
• 제40권4호
• /
• pp.563-581
• /
• 2011

Many novel materials, developed in recent years, have obvious properties with different modulus of elasticity in tension and compression. The ratio of their tensile modulus to compressive modulus is as high as five times. Nowadays, it has become a new trend to study the mechanical properties of these bimodular materials. At the present stage, there are extensive studies related to the strength analysis of bimodular structures, but the investigation of the buckling stability problem of bimodular rods seems to cover new ground. In this article, a semi-analytical method is proposed to acquire the buckling critical load of bimodular slender rod. By introducing non-dimensional parameters, the position of neutral axis of the bimodular rod in the critical state can be determined. Then by combining the phased integration method, the deflection differential equation of bimodular pin-ended slender rod is deduced. In addition, the buckling critical load is obtained by solving this equation. An example, which is conducted by comparing the calculation results between the three of the methods including the laboratory tests, numerical simulation method and the method we developed here, shows that the method proposed in the present work is reliable to use. Furthermore, the influence of bimodular characteristics on the stability is discussed and analyzed.

• Steel and Composite Structures
• /
• 제4권5호
• /
• pp.367-384
• /
• 2004

A numerical model based on the finite element technique is adopted to investigate the behavior and strength of thin-walled I-section beam-columns. The model considers both the material and geometric nonlinearities. The model results were first verified against some of the currently available experimental results. A parametric study was then performed using the numerical model and interaction diagrams for the investigated beam-columns have been presented. The effects of the web depth-to-thickness ratio, flange outstand-to-thickness ratio and bending moment-to-normal force ratio on the ultimate strength of thin-walled I-section beam-columns were scrutinized. The interaction equations adopted for beam columns design by the NAS (North American Specifications for the design of cold formed steel structural members) have been critically reviewed. An equation for the buckling coefficient which considers the interaction between local buckling of the flange and the web of a thin-walled I-section beam-column has been proposed.

• Steel and Composite Structures
• /
• 제16권4호
• /
• pp.437-454
• /
• 2014

The influence of spacers on the behaviour and ultimate capacity of intermediate length CFS open section columns under axial compression is investigated in this paper. The focus of the research lies in the cross- section predominantly, failed by distortional buckling. This paper made an attempt to either delay or eliminate the distortional buckling mode by the introduction of transverse elements referred herein as spacers. The cross-sections investigated have been selected by performing the elastic buckling analysis using CUFSM software. The test program considered three different columns having slenderness ratios of 35, 50 & 60. The test program consisted of 14 pure axial compression tests under hinged-hinged end condition. Models have been analysed using finite element simulations and the obtained results are compared with the experimental tests. The finite element package ABAQUS has been used to carry out non-linear analyses of the columns. The finite element model incorporates material, geometric non-linearities and initial geometric imperfection of the specimens. The work involves a wide parametric study in the column with spacers of varying depth and number of spacers. The results obtained from the study shows that the depth and number of spacers have significant influence on the behaviour and strength of the columns. Based on the nonlinear regression analysis the design equation is proposed for the selected section.

• 한국강구조학회 논문집
• /
• 제10권4호통권37호
• /
• pp.769-777
• /
• 1998

본 연구의 목적은 삼각형네트워크를 갖는 핀접합 단층래티스돔이 형상초기부정을 가질 경우 하중상태에 따라 좌굴특성에 미치는 영향을 검토하는 것이다. 또한 형상초기부정을 고려하는 단층래티스돔의 일반화 좌굴내력식의 개발을 위한 기초자료를 수집하는데 있다. 해석은 유한요소법에 의한 이산화해석법을 이용했다.

• Advances in nano research
• /
• 제7권3호
• /
• pp.181-190
• /
• 2019

The thermal buckling temperature values of the graded carbon nanotube reinforced composite shell structure is explored using higher-order mid-plane kinematics and multiscale constituent modeling under two different thermal fields. The critical values of buckling temperature including the effect of in-plane thermal loading are computed numerically by minimizing the final energy expression through a linear isoparametric finite element technique. The governing equation of the multiscale nanocomposite is derived via the variational principle including the geometrical distortion through Green-Lagrange strain. Additionally, the model includes different grading patterns of nanotube through the panel thickness to improve the structural strength. The reliability and accuracy of the developed finite element model are varified by comparison and convergence studies. Finally, the applicability of present developed model was highlight by enlighten several numerical examples for various type shell geometries and design parameters.

• 한국산학기술학회논문지
• /
• 제10권5호
• /
• pp.1020-1025
• /
• 2009

본 연구에서는 유한요소해석을 통하여 순수휨을 받는 계단식 변단면 일축대칭 I형보의 탄성 횡-비틀림 좌굴강도 산정법에 대해 설계식 개발이 수행되었다. 유한요소해석결과는 새로운 강도계산식 개발에 활용되었으며, 제안된 강도식은 해석결과와 잘 일치하는 결과를 나타내었다. 새로운 좌굴강도 제안식은 해석결과와 비교하여 $-11%{\sim}2%$의 오차범위를 나타내고 있으며, 모멘트 구매계수가 고려되지 않는다면 간편하게 안전측으로 설계에 적극 활용 가능하다. 또한, 다양한 하중 즉 집중하중, 등분포하중, 및 일련의 집중하중이 작용하는 일축대칭 변단면 부재의 좌굴강도 산정식 개발에 크게 기여하게 될 것이다.

• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.2038-2043
• /
• 2009

본 연구는 유한요소해석을 이용하여 순수 휨이 작용하는 T형 단면보의 탄성 횡-비틀림 좌굴강도에 대해 기술하고 있다. 유한요소해석을 통해 얻어진 결과는 AISC-LRFD(2007)설계기준과 비교되었으며, 검토결과 AISC-LRFD 제안식을 이용하여 얻어지는 값들이 유한요소해석 결과보다 큰 값을 나타내고 있어 안전측 설계를 유도하고 있지 못하고 있다. 이에 본 연구에서는 수정된 설계 계산식을 제안하고 예제를 통해 활용성을 검토하였다. 새로운 설계 계산식은 T형보의 횡-비틀림 좌굴강도 산정에 쉽게 적용될 수 있으며, 다양한 하중이 작용하는 경우 T형보의 연구에 적극 활용 될 수 있을 것이다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.22-27
• /
• 1990

Since an eigenvalue problem in structural analysis has been recognized as an important process for the assessment of structural strength, it is usually to be carried out the eigenvalue analysis or buckling analysis of structures when the compression behabiour of the member is dorminant. In general, various variables involved in the eigenvalue problem have also shown their variability. So it is natural to apply the probabilistic analysis into such problem. Since the limit state equation for the eigenvalue analysis or buckling reliability analysis is expressed implicitly in terms of random variables involved, the probabilistic finite element method is combined with the conventional reliability method such as MVFOSM and AFOSM for the determination of probability of failure due to buckling. The accuracy of the results obtained by this method is compared with results from the Monte Carlo simulations. Importance sampling method is specially chosen for overcomming the difficulty in a large simulation number needed for appropriate accurate result. From the results of the case study, it is found that the method developed here has shown good performance for the calculation of probability of buckling failure and could be used for checking the safety of the calculation of probability of buckling failure and could be used for checking the safely of frame structure which might be collapsed by either yielding or buckling.

• 복합신소재구조학회 논문집
• /
• 제5권2호
• /
• pp.1-8
• /
• 2014

Fiber reinforced polymeric plastic (FRP) materials have many advantages over conventional structural materials, i.e., high specific strength and stiffness, high corrosion resistance, right weight, etc. Among the various manufacturing methods, pultrusion process is one of the best choices for the mass production of structural plastic members. Since the major reinforcing fibers are placed along the axial direction of the member, this material is usually considered as an orthotropic material. However, pultruded FRP (PFRP) structural members have low modulus of elasticity and are composed of orthotropic thin plate components the members are prone to buckle. Therefore, stability is an important issue in the design of the pultruded FRP structural members. Many researchers have conducted related studies to publish the design method of FRP structures and recently, referred to the previous researches, pre-standard for LRFD of pultruded FRP structures is presented. In this paper, the accuracy and suitability of design equation for the local buckling strength of pultruded FRP I-shape compression members presented by ASCE are estimated. In the estimation, we compared the results obtained by design equation, closed-form solution, and experiments conducted by previous researches.