• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.35-41
• /
• 2020

We conduct numerical simulations of the interaction of a deformable structure with two-phase compressible flow. The finite volume method (FVM) is used to simulate fluid phenomena including a shock wave, a gas bubble, and the deformation of free surface. The deformation of a floating structure is computed with the finite element method (FEM). The compressible two-phase volume of fluid (VOF) method is used for the generation and development of a cavitation bubble, and the immersed boundary method (IBM) is used to impose the effect of the structure on the fluid domain. The result of the simulation shows the generation of a shock wave, and the expansion of the bubble. Also, the deformation of the structure due to the hydrodynamic loading by the explosion is identified.

• 한국전산구조공학회논문집
• /
• 제20권1호
• /
• pp.9-18
• /
• 2007

본 연구에서는 위상최적화 알고리즘의 수렴성을 개선하기 위해 설계영역에 초기 구멍을 도입하는 방법을 제시하는데, 이것은 경계면에 기초한 최적화 방법의 느린 수렴성을 완화하기 위해, Eschenauer et al.에 의해 고안된 버블 방법의 설계영역 안에 구멍을 도입하는 개념과 연계된다. 버블 방법과 달리, 제안된 방법에서는 최적화 과정동안 구멍의 위치를 정의하는 특성함수를 이용하지 않고, 최적화 초기화 단계에서만 초기 구멍을 도입하는데, 이러한 초기 설계영역 안의 솔리드와 보이드 영역들은 고정되는 것이 아니라 합쳐지거나 쪼개지면서 변화된다. 따라서 위상최적화 알고리즘에서 구멍의 이동에 관련된 복잡한 수치적인 계산 없이 자동적으로 설계변수의 유한변화를 더욱 강화시키기 때문에 목적함수 값의 수렴성을 개선할 수 있다. 본 논문에서는 다양한 치수와 형상의 구멍을 포함하는 초기 설계영역을 가지는 Michell형 보의 위상 최적설계를 밀도분포법으로 불리는 SIMP를 이용하여 수행하였다. 이를 통해 위상최적화의 수렴성을 개선하고 최적위상과 형상에 영향을 미치는 초기 구멍의 효과를 검증하였다.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.479-491
• /
• 1994

Discrete vortex method was applied for simulating an active control of turbulent leading- edge separation bubble. The leading-edge separation zone was perturbed by a time-dependent sinusoidal perturbation of different frequencies and levels. In order to describe the local sinusoidal perturbation at the separation point, a source pulsation vortex technique was proposed. The present two-dimensional vortex simulations were qualitatively compared with the experimental results for a blunt circular cylinder, where perturbation was introduced along the square-cut leading edge of the cylinder $(Kiya et al.^{(6,7)}).$ It was found that the reattachment length attained a minimum point at low levels of perturbation and two minima at a moderate higher perturbation frequency. The effects of local perturbation on the evolution of leading-edge separation bubble were scrutinized by comparing the perturbed flow with the natural flow. These comparisons were made for the distributions of mean velocity and its velocity fluctuations, intermittency and wall velocity. The motions of instantaneous reattachment in the space-time domain were demonstrated, which were also compared with the experimental findings. In order to investigate the reduction mehanism of reattachment length in the separation bubble, various cross-correlations for velocity and pressure and the relevant convection velocities were evaluated. It was observed that the convection velocity was closely associated with its corresponding pulsationg frequency.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.3122-3125
• /
• 2021

Electromagnetic vortex flowmeter is a new type of instrument for detecting leakage of steam generator, and the signal processing method based on the envelope to calculate energy ratio can effectively detect bubbles in sodium flow. The signal processing method is not affected by changes in the amplitude of the sensor output signal, which is caused by changes in magnetic field strength and other factors. However, the detection sensitivity of the electromagnetic vortex flowmeter is reduced. To this end, a signal processing method based on inverse Fourier transform to calculate energy ratio is proposed. According to the difference between the frequency band of the bubble noise signal and the flow signal, only the amplitude in the frequency band of the flow signal is retained in the frequency domain, and then the flow signal is obtained by the inverse Fourier transform method, thereby calculating the energy ratio. Using this method to process the experimental data, the results show that it can detect 0.1 g/s leak rate of water in the steam generator, and its performance is significantly better than that of the signal processing method based on the envelope to calculate energy ratio.

• 한국토양환경학회지
• /
• 제3권1호
• /
• pp.83-92
• /
• 1998

본 연구는 가스 포집관을 설치한 쓰레기 매립지에서의 가스 유동에 따른 모델 해석으로 부터 다음의 결과를 얻었다. 1) 저항이 없는 유량 계측기의 오차는, 투기계수 $10^{-14}$ $m^{2}$(실트; 포화투수계수 $10^{-7}$ m/s)보다 작은 복토를 쓰고 가스 발생량을 계측한다면, \circled1 직경 l0m 내에서는 0.5 mL/s 이상, \circled2 직경 20m 내에서는 2mL/s 이상, \circled3 직경 50m 내에서는 10 mL/s 이상의 유량범위에서, 정확한 계측치를 얻을 수 있다. 2)복토층의 \circled1투기계수가 $10^{-16}$$m^{2}$(점토; 포화투수계수 $10^{-9}$( m/s)에서는, 3종(bubblemeter, water head indicator and rotor meter)의 유량 계측기 모두 50m까지 유효한 계측이 가능하다. \circled2투기계수가 1$10^{-14}$$m^{2}$에서는, bubble meter and water head indicator는 5m 이하, rotor meter는 15m 내의 범위에서 유효한 계측이 가능하다. \circled3투기계수가 $10^{12}$$m^{2}$에서는 가스 포집관의 2m범위 이내에서만 유효히 계측된다. 3) 가스 포집관에 유량 계측기를 설치하면, 계측조건의 변화로 정상조건까지의 도달시간은 bubble meter와 water head indicator는 약 1일, roter meter는 약 1시간 정도가 소요된다.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.46-53
• /
• 2016

Direct numerical simulation is conducted to observe the behavior of microbubbles in isotropic turbulence. Navier-Stokes equation and the motion of equation for microbubbles are solved with periodic boundary condition in a cube domain. Vorticity contour, enstrophy ratio, relative reduction of bubble rise velocity, and the closest distance of particles are investigated for various Stokes numbers and gravity factors to understand clustering of microbubbles. Also, clustering due to the effect of the lift force is investigated.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.8-14
• /
• 2016

A numerical analysis is conducted to estimate the core expansion and the energy behaviors induced by a core disruptive accident in a sodium-cooled fast reactor. The numerical formulation based on underwater explosion theory is carried out to simulate the core explosion inside the reactor vessel. The transient pressure, temperature and expansion of the core are examined by solving the equation of state and nonlinear governing equation of momentum conservation in one-dimensional spherical coordinates. The energy balance inside the computation domain is examined during the core expansion process. Heat transfer between the core and the sodium coolant, and the bubble rise during the expansion process are briefly investigated.

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1430-1437
• /
• 2005

It is very important to achieve a high reproducibility in the ultrasonic measurement of bone mineral density. In this study, we examined number of sampling waveform, control of temperature, diameter of region of interest as factors to improve reproducibility. We decided the optimal number of waveforms to be converted to frequency domain as period of 1. We have minimized the effects of variable temperature and constrained generation of micro bubble by keeping temperature within a range of $32\pm0.5^{\circ}C$ with a precise temperature controlling algorithm. We also found the optimal diameter of region of interest to be 13mm. In this paper, we demonstrated the improved reproducibility by controlling various factors affecting the ultrasonic measurement of bone mineral density.

• 대한조선학회논문집
• /
• 제39권3호
• /
• pp.18-27
• /
• 2002

Eulerian개념을 사용한 격자계 내 임의의 경계면 주위 점성유동 해석에서, 운동하며 변형하는 경계면 근방 해의 정도를 향상시키기 위해서 격자생성시 경계면으로 격자점들을 집중시켜주는 레벨셋법에 바탕을 둔 격자변형법을 도입하였다. 본 연구에서는 격자점들을 경계면 근방으로 집중되는 정도를 용이하게 조절할 수 있도록 새로운 형태의 모니터함수를 제시하였다. 집중격자계를 사용함으로 얻어지는 향상된 해의 정도의 검증을 위하여 바닥에 고정된 반원 실린더 주위 정상유동에 대하여 가상경계법을 함께 사용하여 해석하였다. 수치계산결과는 물체적합 격자계를 사용해서 얻은 결과와 매우 잘 일치하였으며, 집중격자법을 사용하지 않은 해석결과보다 향상된 결과를 보여주었다. 수치계산의 또 다른 예제로서 다수의 고정된 물체주위 유동해석으로 확장 적용하여 공학적 유용성을 검증하였다. 마지막으로 이동 집중격자계의 생성법의 적용을 위해서 움직이면서 변형을 일으키는 2차원 기포상승문제를 해석하였다. 수치해석결과에서 격자점들은 매시간 기포의 변형에 맞추어 적합하게 집중된 형태를 잘 보여주었으며, 고정된 격자계를 사용한 결과와 잘 일치하였다.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1487-1503
• /
• 2019

The methods and performance of a pin-level nuclear reactor core thermal-hydraulics (T/H) code ESCOT employing the drift-flux model are presented. This code aims at providing an accurate yet fast core thermal-hydraulics solution capability to high-fidelity multiphysics core analysis systems targeting massively parallel computing platforms. The four equation drift-flux model is adopted for two-phase calculations, and numerical solutions are obtained by applying the Finite Volume Method (FVM) and the Semi-Implicit Method for Pressure-Linked Equation (SIMPLE)-like algorithm in a staggered grid system. Constitutive models involving turbulent mixing, pressure drop, and vapor generation are employed to simulate key phenomena in subchannel-scale analyses. ESCOT is parallelized by a domain decomposition scheme that involves both radial and axial decomposition to enable highly parallelized execution. The ESCOT solutions are validated through the applications to various experiments which include CNEN $4{\times}4$, Weiss et al. two assemblies, PNNL $2{\times}6$, RPI $2{\times}2$ air-water, and PSBT covering single/two-phase and unheated/heated conditions. The parameters of interest for validation include various flow characteristics such as turbulent mixing, spacer grid pressure drop, cross-flow, reverse flow, buoyancy effect, void drift, and bubble generation. For all the validation tests, ESCOT shows good agreements with measured data in the extent comparable to those of other subchannel-scale codes: COBRA-TF, MATRA and/or CUPID. The execution performance is examined with a mini-sized whole core consisting of 89 fuel assemblies and for an OPR1000 core. It turns out that it is about 1.5 times faster than a subchannel code based on the two-fluid three field model and the axial domain decomposition scheme works as well as the radial one yielding a steady-state solution for the OPR1000 core within 30 s with 104 processors.