• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1172-1179
• /
• 2020

As a Lagrangian particle method, Moving Particle Semi-implicit (MPS) method has great capability to capture interface/surface. In recent years, the multiphase flow simulation using MPS method has become one of the important directions of its developments. In this study, some key methods for multiphase flow have been introduced. The interface tension model in multiphase flow is modified to maintain the smooth of the interface and suitable for the three-phase flow. The mass transfer at immiscible liquid interface entrained by single bubble which could occur in Molten Core-Concrete Interaction (MCCI) has been investigated using this particle method. With the increase of bubble size, the height of entrainment column also increases, but the time of film rupture is slightly different. With the increase of density ratio between the two liquids, the height of entrained column decreases significantly due to the decreasing buoyancy of the denser liquid in the lighter liquid. In addition, the larger the interface tension coefficient is, the more rapidly the entrained denser liquid falls. This study validates that the MPS method has shown great performance for multiphase flow simulation. Besides, the influence of physical parameters on the mass transfer at immiscible interface has also been investigated in this study.

• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.347-352
• /
• 2013

Four types of electrolyte were tested for the application as an electrolyte in the Zn-Br redox flow battery. Electrolyte was consist of $ZnBr_2$ (electrolyte number 1), $ZnBr_2+KCl$ (electrolyte number 2), $ZnBr_2+KCl+NH_4Br$ (electrolyte number 3) and $ZnBr_2+KCl+EMPBr(C_7H_{16}BF_4N)$ (electrolyte number 4). The each electrolyte property was measured by CV (cyclic voltammetry) method. The different between the potential of anodic and cathodic maximum current density in a CV experiment (${\Delta}E_P$) was 0.89V, 0.89V, 1.06V and 0.61V for the electrolyte number 1, 2, 3 and 4, respectively. The electrolyte involved KCl increased conductivity which was appeared by anodic and cathodic maximum current density in a CV experiment. It was estimated that the electrolyte of number 3 ($ZnBr_2+KCl+NH_4Br$) and number 4 ($ZnBr_2+KCl+EMPBr$) could be suitable as an electrolyte in the Zn-Br redox flow battery with non-appeared bubble, non-Br formation and high anodic-cathodic maximum current density.

• Korean Chemical Engineering Research
• /
• 제58권4호
• /
• pp.651-657
• /
• 2020

고체 입자들이 유체처럼 움직이는 유동층 공정은 에너지 전환 공정뿐만 아니라 범용 고분자 수지의 생산 공정에도 이용되고 있다. 범용 고분자 수지 중의 하나인 LLDPE(Linear low density polyethylene)도 기포 유동층 공정을 통해 전세계에서 생산되고 있다. 입자 크기에 비해 밀도가 낮은 LLDPE 입자들은 고분자 중합 반응을 위해 공급되는 수소에 의해서 유동화된다. 그러나 LLDPE 생산 공정은 기포유동층 공정임에도 불구하고 발생한 슬러그로 인하여 반응에 영향을 끼쳐 공정의 효율 저하를 불러올 수 있다. 이에 본 연구에서는 상용 고분자 반응기를 모사한 pilot 규모의 고분자 합성 반응기(0.38 m l.D., 4.4 m High)와 동일한 시뮬레이션 모델을 구축하여 LLDPE 입자의 유동화 상태를 고찰하였다. 특히 기체 유속(0.45-1.2 m/s), 고체 입자 밀도(900-1900 kg/㎥), 입자 구형도(0.5-1.0), 입자 크기(120-1230 ㎛)의 변화에 따른 슬러그 특성을 세밀하게 고찰하기 위하여 전산입자유체해석(Computational particle-fluid dynamics, CPFD)을 이용하였다. CPFD를 통해서 일부 실험자들만 고찰할 수 있었던 flat slug의 발생을 시각적으로 구현하였으며 밀도, 구형도, 크기 등의 고체의 물리적 특성을 변화시킴에 따라 슬러그 발생을 저감시킬 수 있음을 확인하였다.

• 한국건축시공학회지
• /
• 제17권6호
• /
• pp.507-515
• /
• 2017

본 연구는 EXFG를 활용하여 실제 현장 적용이 가능한 고품질의 경량기포콘크리트를 개발하고자 하였는데, 그 결과를 요약하면 다음과 같다. 먼저, 기포혼입율이 증가할수록 플로치도 증가하였으며, 반대로 기포슬러리 밀도는 감소하는 것으로 나타났다. 이때, EXFG의 치환율이 유동성에 미치는 영향은 미미한 것으로 나타났다. 기포율은 EXFG 1%에서 가장 높은 기포율을 나타냈으며, 침하깊이 역시 EXFG 1% 치환 시 팽창반응에 의해 침하가 방지되는 것으로 나타났다. 이때 기포혼입율은 65%가 적정한 것으로 나타났다. 압축강도의 경우 EXFG의 치환율이 1% 이상일 때 강도는 유사하거나 오히려 감소하는 경향을 나타냈으며, 겉보기 밀도는 기포혼입율 65%에서 KS 0.5품 기준을 만족하였다. 건초수축길이변화율의 경우 EXFG를 치환한 경우 이를 사용하지 않는 배합 대비 건조수축일이변화율이 약 10% 이상 감소하는 것으로 나타났으며, EXFG의 치환율이 증가 할수록 열전도율도 비례하게 높아지는 것으로 나타났다. 한편, Mock-up 실험에서 균열발생의 경우 EXFG-1의 경우 기존기술 및 OPC 배합대비 약 50% 이상 균열이 저감되는 효과를 나타냈다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1367-1370
• /
• 2005

Microcellular foam processing of polymers requires a nucleated cell density greater than $10^9\;cells/cm^3$ so that the fully grown cells are smaller than 10 mm. A microcellular foam can be developed by first saturating a polymer sample with a volatile blowing agent, followed by rapidly decreasing its solubility in the polymer. In general, the cellular structure of crystalline polymer foams is difficult to control, compared to that of amorphous polymer foams. Since the gas does not dissolved in the crystallites, the polymer/gas solution formed during the microcellular processing is nonuniform. Moreover, the bubble nucleation is nonhomogeneous because of the heterogeneous nature of the crystalline polymer. In this paper, the effects of the crystallinity and morphology of crystalline polymers on the microcellular foam processing and on reflectivity of products are investigated. First, polymer specimens with various morphology and amount of solved blowing agent were prepared by varying the saturation pressure, saturation time and foaming condition. Then, cell morphologies according to several conditions were studied. The specimens with differing gas amount of solved and morphologies were foamed and their cellular structures were compared. The experimental results of reflectivity are compared to raw specimen and another specimen of different experimental conditions. After the experiments, recognize whether how reflectivity changes according to solved gas amount. And the effect of cell density and cell size on reflectivity is studied

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제4권7호
• /
• pp.297-300
• /
• 2015

의료 진단 초음파영상에서 조영제의 전이시간과 확산패턴의 형태는 질환 및 병변을 분석하는 중요한 파라미터로 고려된다. 조영증강 초음파영상 분석과 관련한 기존의 대부분의 연구에서 대상 영역의 평균 명도 변화곡선을 기반으로 파라미터값을 추출한다. 그런데 이러한 명도 데이터는 조영제의 마이크로 버블 효과로 인하여 그 값이 왜곡될 수 있다. 이에 본 논문에서는 조영증강 초음파 진단 파라미터의 추출 과정에서 그 정확도를 개선하기 위하여 명도값의 변화뿐만 아니라, 조영제의 영향을 반영하는 픽셀에 대한 밀도 정보를 보완적으로 활용하는 방법을 제안한다. 제안된 기법은 간 질환 진단 과정에서 병변의 윤곽선 추출과 병변의 특성분석을 위하여 조영제의 확산시점과 속도를 보다 정확하게 판별할 수 있게 한다. 실제 임상 데이터를 사용한 실험결과를 통하여, 제안된 방법이 파라미터 영상 생성기법에서 개선된 결과를 생성할 수 있음을 보인다.

• 한국재료학회지
• /
• 제5권8호
• /
• pp.1040-1044
• /
• 1995

Sm의 농도가 각각 0.3, 0.4, 0.6인 세종류인(YSmLuCa)$_3$(FeGe)$_{5}$ $O_{12}$ 가넷트 박막을 LPE법으로 비자성재료인 Gd$_3$Ga$_{5}$ $O_{12}$(GGG)기판상에 성장시켜, 버블 자성재료의 자기적 성질을 조사하였다. 공명폭 ΔH는 4$\pi$Ms의 증가에 따라 증가하였고 Sm 농도의 감소에 따라 감소한다. 수직 자기 이방성에너지 Ku는 Sm증가에 따라 증가하며 같은 Sm농도에서는 4$\pi$Ms의 증가에 따라 증가한다. 자벽 이동도는 4$\pi$Ms의 증가에 따라 증가하며 Sm의 증가에 따라 감소한다. Ms.ΔH의 곱이 일정한 사실로 부터 새로운 자기손실인자 Eι을 구할 수 있으며 이는 Sm의 농도에 의존한다.ι을 구할 수 있으며 이는 Sm의 농도에 의존한다.

• 천문학회보
• /
• 제39권1호
• /
• pp.61.1-61.1
• /
• 2014

GSH 006-15+7 is a Milky Way supershell discovered by Moss et al. (2012). This supershell shows large shell-like structures in H I velocity maps. We have analyzed FUV emission for the supershell regions based on the FIMS and GALEX observations. Bright FUV flux at the boundaries of the supershell is mostly originated from dust scattering of FUV photons by dust clouds which was also observed at the boundaries of the supershell. We could find the distance to the supershell can be closer more than 30% compared with the distance of 1500 pc suggested by Moss et al. (2012) from the dust scattering simulation. And we also found the albedo and the phase function asymmetry factor of interstellar grains were 0.30 and 0.40, respectively. The confidence range for the albedo covers the theoretical value of 0.40, but g-factor is rather smaller than the theoretical value of 0.65. The small g-factor might mean the environment of turbulent ISM of the supershell. Meanwhile, the excess of C IV and X-ray emissions in the inside of the supershell can support the existence of hot gas and cooling in the supershell. And the C IV and X-ray emissions are monotonically decrease as away from the center of the SNR. This indicates the size of the hot bubble has considerably shrunk. We applied a simple simulation model to the PDR candidate region of the lower part of the supershell and obtained a H2 column density N(H2) = 1017.0-18.0 cm-2 and total hydrogen density nH ${\geq}$ 10 cm-3. This result shows the PDR candidate region represents a transition region from the warm phase to the cool phase in the PDR.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.111-112
• /
• 2023

With the development of cities, the density of the population is continuously increasing as buildings become larger and more high-rise, but since the Haeundae residential complex fire in Busan in 2010, there has been a growing need to meet the fire protection performance of buildings as large-scale fires continue to occur every year. On the other hand, fire doors, which are one of the fire protection performance of buildings, have been judged unqualified in 82% of cases when fire doors constructed on the actual site were inspected after completion. The reason for this is that paper honeycomb and glasswool, which are used as core materials for fire doors, absorb moisture, reducing thermal insulation performance, and sagging due to increased weight, leading to performance degradation due to warping in empty spaces. To overcome these problems, research is underway to apply lightweight aerated concrete, an inorganic material, as a core material. Therefore, in order to select a blowing agent that produces stable bubbles prior to the production of lightweight bubble concrete for application as a fire door inner core, this study examined the physical performance according to the type of blowing agent and dilution concentration, and the following conclusions were drawn. Compared to vegetable bubbles and independent bubbles, synthetic bubbles have 3~8% higher thermal conductivity than independent bubbles, but 3~6% lower slurry density than vegetable bubbles, and 2~13% higher compressive strength, which is thought to be an improvement of synthetic bubbles.

• Wind and Structures
• /
• 제21권1호
• /
• pp.1-23
• /
• 2015

Wind tunnel testing of a low-rise building with openings (holes) of different sizes and shapes on a roof corner is conducted to measure the internal and external pressures from the building model. Detailed analysis of the testing data is carried out to investigate the characteristics of the internal and external pressures of the building with different openings' configurations. Superimposition of the internal and external pressures makes the emergence of positive net pressures on the roof. The internal pressures demonstrate an overall uniform distribution. The probability density function (PDF) of the internal pressures is close to the Gaussian distribution. Compared with the PDF of the external pressures, the non-Gaussian characteristics of the net pressures weakened. The internal pressures exhibit strong correlation in frequency domain. There appear two humps in the spectra of the internal pressures, which correspond to the Helmholtz frequency and vortex shedding frequency, respectively. But, the peak for the vortex shedding frequency is offset for the net pressures. Furthermore, the internal pressure characteristics indirectly reflect that the length of the front edge enhances the development of the conical vortices.The objective of this study aims to further understanding of the characteristics of internal, external and net pressures for low-rise buildings in an effort to reduce wind damages to residential buildings.