• 한국소음진동공학회논문집
• /
• 제19권9호
• /
• pp.863-869
• /
• 2009

Acoustic noises generated during motor operation in mechanical system are from electromagnetic, mechanical, aerodynamic and electrical sources. For identification of mechanical noise origins, misalignment, unbalance, fan shape, resonance, and vibration modes have been extensively considered to describe noise behavior. An experiment-based approach as well as a mathematical approach needs to be adopted for a realistic study into noise and vibration of the motor, because motor noise characteristics differ from type to type due to various noise sources. This paper analyzes noise characteristics of a brushless DC motor for air-conditioner fan, and proves that the test motor noise originates from acoustic modes of airspace in the motor. The motor noise sensitivity analysis by design of experiments reveals that the noise characteristics are closely related to switching frequency and frame thickness.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권8호
• /
• pp.983-989
• /
• 2007

This paper decribes multi-phase BLDC motor with a minimum torque pulsation among BLDC motor used for electric propulsion system. Multi-phase BLDC motor has characteristic that phase of stator has more than 3-phase. This paper is modeling two type of BLDC motor, one has 3-phase and the other has 7-phase, and it shows simulation of them comparing its characteristics. As a result of simulation, the 7-phase BLDC motor shows better performance in terms of torque pulsation. It is also found that the torque pulsation is reduced further by increasing the number of phase.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.242-250
• /
• 1999

This paper presents an estimation scheme of the external torque applied on the motor by using measured motor input current when the IPM(Interior Permanent Magnet) rotor type BLDC motor operates with constant speed. In general, the BLDC motor is controlled by vector control method. If it could be operated at over critical speed, the control scheme must be modified to flux-weakening control method. The external torque applied on the motor using flux-weakening control method could not be calculated by conventional torque equation because the demagnetizing current Id exists in the motor input current. In this paper, the commonly used flux-weakening control method is studied and the modified torque estimation scheme is suggested. The estimation scheme has been verified by the simulations and experimental results.

• 해양환경안전학회지
• /
• 제25권6호
• /
• pp.802-808
• /
• 2019

직류전동기는 속도제어가 간단하고, 출력 토크특성이 우수한 장점으로 윈치나 카고 펌프 모터 등으로 선박에서 많이 사용되었으며, 전기추진선박이 도입된 초기에는 선박용 추진전동기로도 적용되었다. 하지만 브러시와 정류기와 같은 기계적 정류장치의 단점으로 인해 최근에는 직류전동기와 전기적인 특성은 매우 유사하지만 기계적인 정류장치를 설치하지 않고 반도체 소자를 이용한 전자적인 정류장치를 사용하는 브러시리스 직류전동기의 사용이 증가하고 있다. 기존의 브러시리스 직류전동기를 구동하기 위한 인버터 시스템은 2상여자방식을 사용하므로 역기전력파형이 사다리꼴모양으로 되며, 이로인해 전류가 흐르는 권선이 바뀌는 상전류 전환 구간에서 고조파와 토크리플이 발생하게 된다. 이러한 고조파와 토크리플을 저감하기 위한 다양한 방안이 연구되어 발표되었으며, 본 연구에서는 전력분석프로그램을 이용하여 브러시리스 직류전동기의 구동회로에 비례적분 속도전류제어기 알고리즘을 구현한 Cascaded H-Bridge 멀티레벨 인버터를 적용하였다. 모델링한 브러시리스 직류전동기의 시뮬레이션을 통해 제안하는 전동기의 구동방식을 적용하는 경우에 기존의 구동방식에 비해 전동기 입력측 전압파형 개선과 고조파 및 토크리플이 현저히 저감되는 결과를 확인할 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제14권4호
• /
• pp.385-391
• /
• 2008

To effectively cope with a complexity of kinematic metrology due to workspace enlargement of the planar stage, the linear induction motor is suggested as its new driving source. Especially, the linear induction motor under uniform plate type of secondary doesn't inherently have a periodical force ripple which is generally shown in the brushless DC motor. But, it presents a poor transient characteristic at zero or low speed zone owing to time delay of flux settling, resulting in slow response. To improve the servo property of linear induction motor and apply successfully it to the precision stage, this paper discusses a modified vector control methodology. The controller has a novel input form, fixed d-axis current, q-axis current and forward-fed DC current, to control thrust force and normal force of the linear induction motor independently. Influence of the newly introduced input and the feasibility of controller are validated experimentally.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.435-438
• /
• 2002

The Objects of this paper are developing and also improving a high-speed driving system of bushless DC motor(BLDCM) with economical and practical performance. Because BLDC motors are manufactured that each motor can create proper torque for their individual purpose, it is difficult to increase over the rated speed when a motor speed (with it's rated road) is reaching to a maximum speed so the motor torque cannot be increased. This paper verifies the effects of Leading Angle Algorithm, that is proposed on this paper, with examining existing methods to maximize the torque of a motor in high-speed driving area. The arithmetic processor for this experiment is TMS320C240 DSP controller that is designed for a special purpose of motor control in Texis Instrument Inc., and the used Inverter is PM10CSJ060, a Intelligent Power Module of Mitsubishi Corporation.

• Journal of Magnetics
• /
• 제20권1호
• /
• pp.91-96
• /
• 2015

As many researchers are relentlessly trying to improve the power generation schemes from the power grid, to meet the constantly increasing electricity demand. In this paper, the results of a finite element analysis are carried out to study on a design optimization of an asymmetric air-gap structure in 3-phase Permanent Magnet Brushless DC Motors. To achieve a high efficiency for a 3-phase PM BLDC motor, the asymmetric air-gap structure is proposed considering the rotation direction of a motor. Generally, a single-phase BLDC motor is applied asymmetric air-gap structure for starting. This is because the asymmetric air-gap structure causes reluctance variation so the motor can utilize reluctance torque toward a rotation direction. In this paper, the asymmetric air-gap is applied to 3-phase BLDC SPM motor so it utilizes reluctance torque with alignment torque. A proposed model is designed by 2-D FE analysis and the results are verified by experimental test.

• 전력전자학회논문지
• /
• 제9권4호
• /
• pp.311-318
• /
• 2004

최근 각종 산업기기 및 자동화기기에는 회전자가 영구자석으로 구성된 브러시리스 전동기의 사용이 증가하고 있다. 그러나 회전자가 영구자석으로 이루어진 BLDC 전동기의 경우 회전자 위치 판별 센서는 필수 요소이다. 그러나 센서(엔코더, 레졸버등)를 사용할 경우 크기 증가, 비용 상승 등의 원인으로 작용한다. 따라서 본 논문에서는 PM BLDC 전동기의 속도제어를 수행함에 있어 기존의 엔코더와 Hall-IC 3개를 이용하지 않고, 두개를 이용하여 회전자의 위치를 판별함과 동시에 속도 센서를 대신하여 사용할 수 있는 방법을 제안하였다. 그 결과 성능은 동일하고, 구동회로의 크기와 제조 단가를 낮출 수 있는 효과를 얻었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.22-25
• /
• 1999

A brushless DC motor has the high quality of torque output and silence, has been more widely used in industrial area. As the driver and controller of BLDC motor have been more complicated and precise, simulation method has been much used in motor design. And the output characteristics of BLDC motor is determined by the waveform of BACK-KMF in instinct. But because the conventional model of BLDC motor is obtained by approximation of real nonlinear waveform to ideal trapezoidal waveform, the error is occurred in simulation result. Thus in this paper, for the correction of this error in simulation, the model of real nonlinear waveform considered is proposed, and the simulation result is obtained in case of three-phase, four-poles Y-connected, surface mounted permanent magnet BLDC motor.

• 소음진동
• /
• 제10권6호
• /
• pp.977-984
• /
• 2000

Vibration of disk drive spindle is one of the major limiting factors in achieving higher track densities in hard disk drives. Vibration of a BLDC motor is a coupled phenomenon between mechanical characteristics and magnetic origins through the motor air-gap. In this paper, radial magnetic forces for symmetric and asymmetric BLDC motor are calculated with respect to the various rotor eccentricity using analytic method. Based on the results of the radial magnetic forces, transient whirl responses of the spindle motor are analyzed using finite element and transfer matrices. Results show that an asymmetric motor has a worse effects on unbalanced magnetic forces and vibration when mechanical and magnetic coupling exists.