• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.382-385
• /
• 2003

Introduction of digital broadcasting service does not only mean the change of information transmission method but also the change of total broadcasting system. In past day, Television was only received one-sided information from broadcasting station, but digital broadcasting means that digital television becomes the most important means of information transmission by the introduction of new programming, lots of channels, data service, multi communication. In the age of the digital broadcasting, the recording and replay medium's interest is getting higher. The medium is able to record more than 24 hours' digital broadcasting programs without additional tapes. In this paper the recording and replay device using HDD was implemented and device driver based on linux was programmed. It has Intel PXA250 processor and hard disk is used as storage equipment. And transport Stream is saved on hard disk through PXA250's data bus. FIFO is added to solve the different saving speed and FPGA is also added to display the saved data.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.47-53
• /
• 2020

In the case of a failure due to equipment deterioration in the public address system or a worker's mistake during construction, broadcasting becomes impossible. In this situation, we have designed a more advanced management broadcast system that can broadcast. The broadcasting service is operated using main broadcasting device, and local broadcasting device operates separately only in the local area. If the main broadcasting device becomes inoperable, the procedure for transferring the control activates the device with the local broadcasting devices based on data backed up by the main controller. This paper proposes an improved method of the conventional emergency broadcasting device duplication method. The existing method could not use the standby equipment in the normal state, but in the proposed method, the standby equipment can be used as local broadcasting equipment in usually. This method enables stable system operation while minimizing resource waste due to redundant configuration of expensive devices.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.791-798
• /
• 2014

As a new hybrid broadcasting service, augmented broadcasting shows enhanced broadcasting content on a large TV screen, while augmented reality (AR) on a mobile device augments additional graphical content onto an input image from the device's own camera to provide useful and convenient information for users. A one-sided broadcasting service using AR has already been attempted in virtual advertisements during sport broadcasts. However, because its augmentation is preprocessed before the video image is transmitted, the viewer at home may have no influence on this formation; and no interaction for the user is possible unless the viewer has a direct connection to the content provider. Augmented broadcasting technology enables viewers to watch mixed broadcasting content only when they want such service and to watch original broadcasting content when they do not. To realize an augmented broadcasting service, the most important issue is to resolve the hybrid content synchronization over heterogeneous broadcast and broadband networks. This paper proposes a novel hybrid content synchronization scheme for an augmented broadcasting service and presents its implementation and results in a terrestrial DTV environment.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.88-96
• /
• 2015

The purpose of this study is to design an authoring tool and a corresponding device for an olfactory display that can augment the immersion and reality in broadcasting services. The developed authoring tool allows an olfactory display to be properly synchronized with the existing video service by applying the standardized format using ISO/IEC 23005 (MPEG-V) and the corresponding developed scent display device. To propose the proper data format for the olfactory display, we have analyzed both the multimodal combination and the cross-modality related to the olfactory display. From the results of the analysis, we derived a set of olfactory parameters for the olfactory display that are related to emotion. The analyzed parameters related to emotion in an olfactory display are synchronization, scent intensity, scent persistence, and hedonic tone. These parameters should be controlled so that the olfactory display can be in harmony with the existing media to augment emotion. In addition, we developed a scent display device that can generate many kinds of scents and that satisfies design conditions for olfactory parameters that are for use with broadcasting services.

• The KIPS Transactions:PartB
• /
• v.12B no.6 s.102
• /
• pp.631-636
• /
• 2005

Recently, research started to focus on Digital Multimedia Broadcasting(DMB), while the DMB service is already being launched to provide high quality audio, video and data broadcasting in Korea. Therefore, the demand for multimedia contents is also rose very sharply. In this paper, we introduced an MPEG-4 contents authoring system with mobile device for Digital Multimedia Broadcasting. Our system allows both single-handed and collaborative authoring modo. Further more, to overcome the delaytime for decoding the BIFS information, we also introduced an efficient algorithm to generate dynamic and light BIFS information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.957-962
• /
• 2016

Current terrestrial Digital Multimedia Broadcasting (T-DMB) is conducting the emergency alert broadcast, or can view a variety of broadcasting. However, propagation shadow area is a situation where the service is limited due to limitations of facilities investment. In addition, there is the problem of T-DMB broadcasting is for viewing only a restricted area and a mobile device because the mobile is also T-DMB viewing device impossible. In this paper, it receives a T-DMB broadcasting as a way to solve the problems of the T-DMB system, which was studied the re transmission to the mobile device. Accordingly, by receiving the broadcast may be watched in the mobile device the T-DMB reception impossible. Also provides a one-way/two-way authentication mechanism using a conditional access function, and the system was configured so that the user can watch only the registered broadcasting.

• Journal of the Korean Professional Engineers Association
• /
• v.38 no.3
• /
• pp.6-12
• /
• 2005

DMB(Digital Multimedia Broadcasting) Service was started, DMB enables people on the move to enjoy seamless video streaming, theater-quality audio and data through a hand-held digital device much like a handset or an in-car terminal. Realization of any-time, any-where, any-device, any-one DMB Service is needed for the government effective policy, Technical R&D and Standization, Corporate investment.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.77-82
• /
• 2020

IoT devices frequently require input resources to communicate with various sensors or IoT platforms. IoT device wastes a lot of time as idle time or waiting time to check the data of the input resource and use the input resource. In addition, IoT devices use various input resources. We compares and analyzes input idle time and input waiting time generated from hardware serial input resource, software serial input resource, digital port input resource, and analog port input resource using Arduino widely used as IoT device. In order to design the IoT device framework, it is necessary to understand the characteristics of input resources and to design them to minimize unnecessary input idle time and input waiting time. The analog input wait time has a much larger input wait time than the digital input wait time, so it must be designed to receive analog information periodically at the appropriate timing. The characteristics of the input resources analyzed in this way help to design an efficient IoT device.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.89-96
• /
• 2010

In this paper, "a wireless camera image transmission system" is aimed for the free camera shooting in the indoor and outdoor environments. Currently in broadcasting program production environments, because the cable connections between TV OB VAN(outside broadcasting VAN) and EFP camera or ENG camera have many obstacles and limits of distances, it is very unconvienent for the free camera shooting. Therefore in this paper, wireless image transmission device and receiving device in DVB-T broadcasting are developed. In this paper, analog composite image signal output camera, image signal compression MPEG-2 system and COFDM mage transmission system are produced and experimented. The results for the image and transmission system had good QoS values and from this results, it is possible to apply TV program productions and wireless CCTV device industries.

• The KIPS Transactions:PartC
• /
• v.12C no.7 s.103
• /
• pp.1047-1056
• /
• 2005

The existing data broadcasting system has the mechanism that the receiving device should download repetitively the entire broadcasting application data until it acquires the whole of the application data. This mechanism takes long time for the download. To solve this problem this paper proposes a scheme that the device effectively downloads the missing parts of broadcasting application data through the return channel and shows the performance evaluations of the proposed scheme with respect to the experiment.