• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.501-510
• /
• 2016

Capabilities of several beamforming techniques are compared for estimating the position of a moving source. Beamforming has enabled to widen our perspective of aeroacoustics in wind tunnel experiments and has provided useful approach in array measurements. Meanwhile beamforming techniques have been developed in a way to improve estimation accuracy and to save ing effort at the same time. In order to achieve reasonable outcome from aeroacoustic measurement, it is important to identify the spectral characteristics of source and to select an appropriate beamformer. Though aeroacoustic sources normally generates broadband noises, many array signal processing have been focused on narrowband processing which makes calculation numerically efficient. However, calculation in frequency-domain requires selection of single frequency of interest which affects spatial resolution and sidelobe level as a consequence. To be able to localize broadband noise source, it is proposed to use broadband beamforming. The formulas implements the deletion of diagonal term from cross spectral matrix. In this study, trajectory of flying source emitting broadband noise was simulated and several beamformers are applied.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.384-388
• /
• 2008

Multiple antenna technology, such as multiple input multiple output (MIMO), beamforming is one of the most promising technology for broadband wireless communication. In OFDM environment, we found that as the number of paths is increased, smart antenna system cannot fully exploit beamforming gain. In this paper, we propose a beamforming scheme and analyze the performance of the proposed beamforming scheme in WiBro smart antenna system. WiBro is an OFDMA-based multiple access service for wireless broadband multimedia environment. The proposed beamforming technique for WiBro smart antenna system can effectively improve the performance of the systems in multipath fading environment.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.386-389
• /
• 2004

Beamforming for underwater acoustic communication is affected by the broadband feature of underwater acoustic communication signal, which has the low center frequency compared to the signal bandwidth. In this paper, the baseband equivalent array signal model is derived and we present computer simulation results for the broadband finite impulse response (FIR) beamformer performance according to the FIR filter order and the tap spacing. If the FIR filter order is increased above the optimum value, the beamformer performance is degraded. Also the tap spacing is related to the optimum FIR filter order.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.5
• /
• pp.300-304
• /
• 2017

In a cylindrical sonar, a conventional broadband energy detector has limitations in the separation of adjacent targets. In this paper, a broadband detection algorithm using cross-correlation is applied to the cylindrical sonar to improve the bearing resolution. The proposed algorithm uses split beamforming before broadband detection processing using cross-correlation to generate half beams. The time delay obtained from the peak of correlation between half beams is used to estimate the bearing of target. Simulations demonstrate the improved performance of the proposed algorithm against the conventional algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.200-206
• /
• 2020

In this paper, we propose a broadband beamforming method using the Spatial Response Variation (SRV) which is defined to measure the fluctuation of the array spatial response within the desired frequency band. By applying the SRV to regularization term, we achieve a good quality main beam width variation less than 1 degree within the desired frequency band. In design experiments, we show that the proposed method is better than the existing method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.6
• /
• pp.501-504
• /
• 2017

In this paper, a hybrid beamforming antenna system using broadband butler matrix and phase shifter is proposed. In the previous works, an $8{\times}8$ butler matrix is used to overcome a drawback of the $4{\times}4$ butler matrix based switched beamforming which provides only 4 beam patterns. However the $8{\times}8$ butler matrix should be designed on the bi-layered substrate using via holes due to its complex structure. It causes performance degradation. To overcome these problems, the proposed hybrid beamforming antenna system is designed on the single side of the substrate for simple structure. By addition of two phase shifter, it provide various beam patterns. The proposed antenna system provides more than 10 dBi radiation gain in the ${\pm}45^{\circ}$ scanning range by 16 input combinations.

• ETRI Journal
• /
• v.24 no.3
• /
• pp.197-204
• /
• 2002

This paper presents the results of the numerical simulation of a multibeam active phased array antenna for a High Altitude Platform Station (HAPS). The simulation takes into account the random errors caused by the non-identity of the array elements and the inaccuracy of the antenna calibration. The results of our statistical simulation show that the strict requirements on the sidelobe envelope for HAPSs can be met when the amplitude and phase distribution errors are minor, a condition which may be achieved by using digital beamforming.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.123-129
• /
• 2018

Recently, as required wireless communication traffic increase, millimeter wave mobile technologies that can secure broadband spectrum are gaining attention. However, the path loss is high in the millimeter wave channel. Massive MIMO system is being researched in which can complement the path loss by beamforming by equiped large-scale antenna at the base station. While legacy beamforming techniques have analog and digital methods, practical difficulties exist for application to massive MIMO systems in terms of system complexity and cost. Therefore, this paper studies a hybrid beamforming scheme for massive MIMO system in the millimeter wave band. Also this paper considers spatial multiplexing scheme to serve multi-users with multiple received antennas. Gains of the beamforming and the spatial multiplexing schemes are evaluated by analyzing the spectral efficiency.

• Journal of Biomedical Engineering Research
• /
• v.32 no.3
• /
• pp.198-206
• /
• 2011

Hearing devices like cochlear implant, vibrant soundbridge, etc. try to offer better sound for people. In hearing devices, several beamformers including conventional directional microphone are applicable to noise reduction. Each beamformer has different directional response and it could change sound intelligibility or quality for listeners. Therefore, we investigated the performance of three beamformers, which are first and second order directional microphone, and broadband beamformer(BBF) with a computer simulation assuming hearing device microphone configuration. We also calculated objective measurements which have been used to evaluate speech enhancement algorithms. In the simulation, a single speech and a single babble noisewere propagated from the front and $135^{\circ}$ azimuth degrees respectively. Microphones were configured in an end-fire array and the spacing was varied in comparison. With 3 cm spacing, BBF had about 3 dB higher enhanced SNR than that of directional microphones. However, enhancement of segmental SNR and frequency weighted segmental SNR were similar between the first order directional microphone and broadband beamformer. In addition when steady state noise was used, broadband beamformer showed the increased performance and had the highest enhanced SNR, and segmental SNR.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.5 no.1
• /
• pp.43-59
• /
• 2006

A compact and broadband $4\times1$ array antenna was developed for 3G smart antenna system testbed. The $4\times1$ uniform linear away antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% $(VSWR\leq1.5)$, 21.78% $(VSWR\leq2)$ with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.