• Korean Institute of Interior Design Journal
• /
• v.22 no.1
• /
• pp.247-255
• /
• 2013

In this study, the colors and characteristics of Gwangbok-ro of Busan were analyzed in the standpoint of local images based on the examination of the facade designs of stores along the road of Gwangbok-ro, Busan a main street with massive population flow. To that end, the facades of stores, correlation with the city, color and locality were examined, and after the status of facade designs in Gwangbok-ro were identified through case survey by it, color images were analyzed. For color analysis, Munsell color system was used as basic tool. As a result of examining the colors in Gwangbok-ro area, the following status could be analyzed on 3 attributes of hue, brightness and chroma: First, analysis results of hue indicated that dominant color that covers 70% or more of the area represented mid brightness and low chroma in GY(36.1%) series, subsidiary color which covers 25% or more of the area mid brightness and low chroma in YR(26.5%) series, and accent color that covers less than 5% of the area high brightness and low chroma of GY(40%) series. Second, in brightness analysis, dominant color mostly represented mid brightness, subsidiary color mid brightness and accent color high brightness respectively. In particular accent color showed more intensive crowding phenomenon in high brightness. Third, as for chroma, dominant color, subsidiary color and accent color all are gathered in low chroma, however in small number of accent colors, peculiar high chroma appeared notable. In conclusion, the colors of Gwangbok-ro area analyzed based on the facade design of the stores along the road in this study were superficial colors that reflect the life of people in the area, artificial colors by improvement of the local environment. This study is meaningful in that the image of Gwangbok-ro was found through building colors in one part of the city Busan. It is judged that the study results would become useful as reference document in planning out environment colors later on.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.444-449
• /
• 2010

The PID control to the monitor color correction was applied. Converted Gamma LUT was applied to the video card. Color and brightness information from the PID controller was used as control inputs. Color and brightness information from a calibrated monitor is measured again. Then, the difference between the preset values for the PID controller was compensated by the feedback. The software measured by color meter was used for color and brightness information. All of the monitor does not measure the color and brightness was measured by sampling. The color and brightness from the monitor were measured not by complete enumeration but by sampling. In the experiment, the original image was displayed on the same monitor as well as two other brands, and then, Gamma and Contrast were measured and compared.

• Journal of Fashion Business
• /
• v.18 no.6
• /
• pp.174-187
• /
• 2014

This study intended to propose a guideline designed to secure safety by developing a functional color design for the color of the ordinary working clothes worn in the actual industrial settings of the machine industry in national industrial complexes in Korea. For this, a total of 6 sets of actual working clothes were produced for test, using 2-color arrangements with blue, of varying brightness and chroma for top and bottom, in relation to the visibility proven in preceding studies and evaluated in the machine industry. Blue was suggested the best proper color for machine industry by previous studies. For the material of working clothes, a total of 111 swatches were collected from the Dongdaemoon Fabric Market, and they were analyzed for color values. A total of 6 materials were used to produce working clothes for testing, which represented high brightness, medium brightness, low brightness, high chroma, medium chroma, and low chroma. Clothes were tried at the industrial settings for machine industry in a national industrial complex located in Gyeongsangnam-do and the expert satisfaction evaluation was performed based on items related with safety. As a result, higher satisfaction was shown when the brightness difference of top and bottom clothes was greater, and for chroma, relatively higher satisfaction appeared when the chroma of both top and bottom clothes was high. To secure satisfaction for both brightness and chroma, it is possible to deduce that the 2-color arrangement using the strong tone with high brightness and high chroma and the dark tone with somewhat low brightness and high chroma would be effective. Top and bottom clothes in the same color with high chroma had high visibility but had somewhat low evaluation for harmonious arrangements. This indicated that the arrangement of vivid colors for top-bottom clothes is inappropriate.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.836-841
• /
• 2004

This paper describes ASIC design for brightness revision control, A LED Pixel Matrix (LPM) design and LPM in natural color LED vision. A designed chip has 256 levels of gradation correspond to each Red, Green, Blue LED pixel respectively, which have received 8bit image data. In order to maintain color uniformity by reducing the original rank error of LED, we adjusted the specific character value 'a' and brightness revision value 'b' to pixel unit, module unit and LED vision respectively by brightness characteristic function with 'Y=aX+b'. In this paper, if designed custom chip and brightness revision control method are applied to manufacturing of natural color LED vision, we can obtain good quality of image. Furthermore, it may decrease the cost for manufacturing LED vision or installing the plants.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1291-1296
• /
• 2005

In this paper, we prevent a display quality drop for image of characteristics brightness ununiformity depend on LED use to LED vision. It is about that method also a control system development equipped with brightness compensation function of LED vision which is done easily for LED set up of LED vision. Generally, It is calculate driving current value is attended by each brightness to brightness characteristics mathematical function establish by "Y=aX+b", When is doing brightness value for "Y", driving current value for "X", brightness compensation value by using time for "b", characteristics value for "a" ground with characteristics curve of LED. So much, First It is create brightness data of each pixel take a photograph red, green and blue of LED vision. Second It is get average error about each pixel which get average brightness value of entire. Last, It is handle a complicated for about gradationally regulation to color and brightness of image send to LED vision. Also It raise the whole average brightness value of vision adjust for "b" value to solve brightness drop problem of LED using the long time.

• International Journal of Costume and Fashion
• /
• v.5 no.2
• /
• pp.46-54
• /
• 2005

The Purpose of this research was focused on analyzing how costume was exactly researched for film in comparison with the original Renaissance costume, and how to change the degree of brightness and chroma in costume of two films, 'Shakespeare in Love' and 'Elizabeth: The Virgin Queen'. For these purpose, each costume of main seven scenes was analyzed in terms of silhouette, detail, and trimming. Color image, brightness and chroma of costume were compared with the color chip data from Samsung Design Net. As results, costume from two films had exactness in historical research. but the original costumes were modernly changed by the purpose of director. Color image of costume were used proper colors for the characteristic of the story. Costumes of heroine was numerically changed at the degree qf the brightness and chroma through story-going. By this change, director could effectively give dramatic rhythm for the story. The limitation of this research was that color analysis had been conducted on the screen, and this fact might mean the original colors of film might be different from those of screen.

• International journal of advanced smart convergence
• /
• v.9 no.4
• /
• pp.203-208
• /
• 2020

In this paper, we propose the design and implementation of a desktop LED stand and smart app that automatically adjusts color temperature and illuminance for optimal brightness and eye health by improving the structural problem of the LED stand. It is a tabletop LED stand that supports optimal brightness through color temperature control and heat transfer through infrared LED to relieve eye strain through blood circulation and muscle movement. The LED stand works with the smartphone to automatically adjust the optimal brightness and color temperature for the user's environment. In addition, the brightness of the infrared LED is adjusted to a living frequency of 4Hz to relax the eye muscles and reduce eye strain. This study implemented an effective measured data-based system of previous studies through the color temperature and illumination of LED lighting, and near-infrared rays, and presented meaningful results by conducting an experiment to prove the effect through subjects.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.10
• /
• pp.604-614
• /
• 2005

Color segmentation takes great attentions since a color is an effective and robust visual cue for characterizing one object from other objects. Color segmentation is, however, suffered from color variation induced from irregular illumination changes. This paper proposes a reliable color modeling approach in HSI (Hue-Saturation-Intensity) rotor space considering intensity information by adopting B-spline curve fitting to make a mathematical model for statistical characteristics of a color with respect to brightness. It is based on the fact that color distribution of a single-colored object is not invariant with respect to brightness variations even in HS (Hue-Saturation) plane. The proposed approach is applied for the segmentation of human skin areas successfully under various illumination conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.75-76
• /
• 2000

Tone reproduction characteristics of color and gray have a great influence on the picture quality in visual display. In this study, we optimized tone reproduction characteristics of color and gray of CRT monitor by setting brightness to the optimum level, in which offsets for RGB channels can be assumed to zero. The optimum brightness level could be found by measuring a few tones of neutral for the combination of 2 levels of brightness and 2 levels of contrast. As the result, the relationship between normalized DAC count and normalized luminance of primary color or gray has been simply presented by gamma and result in good phosphor constancy.

• Korean Institute of Interior Design Journal
• /
• v.16 no.5
• /
• pp.89-97
• /
• 2007

This study compares, analyzes and reevaluates color conditions and images before and after the execution of the 7th curriculum with elementary schools in Gwang-ju Metropolitan City based on the fact that color among physical environments of elementary classrooms has an important influence on children's emotion and draws problems and aims to accumulate the basic materials for preparing guidelines of improving color environment at general classrooms of elementary schools. Consequently, according to color conditions, major colors on ceiling and wall were high brightness/nigh chroma of Y and YR line regardless of division of grades and other color factors of classroom showed that wall and ceiling used similar colors, but brightness was higher after change than before it. In evaluation of color images, lower grades showed negative color images such as 'common,' 'rustic,' and 'strange' before change, but they showed positive color images after change such as 'clean,' 'unique,' and 'soft'. But, most of higher grades showed negative reactions before change such as 'common,' 'strange,' and 'rustic' and they showed positive reactions after change only in such items as 'clean,' 'warm,' and 'unique', but Indicated negative reactions in remaining items such as 'strange,' 'rustic,' 'stiff,' and 'artificial'. Accordingly, in using colors for lower grade classroom, arrangement of colors through adjustment of brightness and chroma between ceiling, wall and other components based on coloring of high brightness and low chroma of similar colors should be considered and for higher grade classroom, arrangement of colors of unique images of mid-brightness/mid-chroma among warm color lines of similar colors should be examined.