• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.5
• /
• pp.371-383
• /
• 2011

It is important to secure illumination for the driver's safety because the tunnel is a space for changing brightness quickly, and lighting fixtures of the tunnel have consumed a lot of electric lighting energy for operating in both the daytime and at night. This study aims to evaluate daylighting performance of Mirror Reflector System for luminous environment improvement of tunnel space by using RADIANCE simulation program. The results of simulation show that illuminance of bar type is higher than illuminance of pole type at 20 m from the tunnel entrance.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.3
• /
• pp.132-136
• /
• 2002

In this study, we analyzed the luminous efficiencies of Ne-Xe-Ar and He-Ne-Xe-Ar mixing gas in compared with those of Ne-Xe and He-Ne-Xe mixing gas to improve luminous efficiency by adding a small amount of Ar gas. At the Xe 4%, the brightness of Ne-Xe and He-Ne-Xe mixing gas is higher than others. As the Xe % increases, power consumption decreases. Thus, in the Ne-Xe and He-Ne-Xe mixing gas of Xe 4%, we obtained maxium luminous efficiency. The Ar concentration is varied from 0.1% to 0.7% in this study. The luminous efficiency of the Ne-Xe(4%) mixing gas is improved to 1.16 and 1.13 lm/W by adding an Ar concentration of 0.4% and 0.5%, respectively. The luminous efficiency of the He-Ne-Xe(4%) (He : Ne = 7 : 3) mixing gas is considerably improved by adding an Ar concentration of above 0.3%. The maximum luminous efficiency of this mixing gas is 1.38 lm/W at the condition of adding an Ar concentration of 0.5%.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.864-867
• /
• 2006

Thermal infrared images of Landsat-5 TM and Landsat-7 ETM+ sensors have been unrivalled sources of high resolution thermal remote sensing (60m for ETM+, 120m for TM) for more than two decades. Atmospheric effect that degrades the accuracy of Sea Surface Temperature (SST) measurement significantly, however, can not be corrected as the sensors have only one thermal channel. Recently, MODIS sensor onboard Terra satellite is equipped with dual-thermal channels (31 and 32) of which the difference of at-satellite brightness temperature can provide atmospheric correction with 1km resolution. In this study we corrected the atmospheric effect of Landsat SST by using MODIS data obtained almost simultaneously. As a case study, we produced the Landsat SST near the eastern and western coast of Korea. Then we have obtained Terra/MODIS image of the same area taken approximately 30 minutes later. Atmospheric correction term was calculated by the difference between the MODIS SST (Level 2) and the SST calculated from a single channel (31 of Level 1B). This term with 1km resolution was used for Landsat SST atmospheric correction. Comparison of in situ SST measurements and the corrected Landsat SSTs has shown a significant improvement in $R^2$ from 0.6229 to 0.7779. It is shown that the combination of the high resolution Landsat SST and the Terra/MODIS atmospheric correction can be a routine data production scheme for the thermal remote sensing of ocean.

• Journal of Information Display
• /
• v.7 no.2
• /
• pp.16-21
• /
• 2006

The effect of improvement on the surface morphology of screen-printed carbon nanotube (CND) films was studied by using the optically clear poly-dimethylsiloxane (PDMS) elastomer for surface treatment. After the PDMS activation treatment was applied to the diode-type CNT cathode, the entangled carbon nanotube (CNT) bundles were broken up into individual free standing nanotubes to remarkably improve the field-emission characteristics over the as-deposited CNT film. Also, the cathode film morphology of a top gated triode-type structure can be treated by using the proposed surface treatment technique, which is a low-cost process, simple process. The relative uniform emission image showed high brightness with a high anode current. This result shows the possibility of using this technique for surface treatment of large-size field emission displays (FEDs) in the future.

• Journal of the Korean Society of Visualization
• /
• v.13 no.3
• /
• pp.15-19
• /
• 2015

We developed a high-throughput microscopy (HTM) method which enabled us to replace a conventional phase contrast microscopy (PCM) method that has been used as a standard analytical method for airborne asbestos. We could obtain the concentration of airborne asbestos fibers under detection limit by automated image processing and analysis using HTM method. Here we propose an improved image processing algorithm with variable parameters to enhance the accuracy of the HTM analysis. Since the variable parameters that compensate the difference of the brightness are applied to the individual images in our new image processing method, it is possible to enhance the accuracy of the automatic image analysis method for sample slides with low asbestos concentration that caused errors in binary image processing. We demonstrated that enumeration of fibers by improved image processing algorithm remarkably enhanced the accuracy of HTM analysis in comparison with PCM. The improved HTM method can be a potential alternative to conventional PCM.

• Transactions of Materials Processing
• /
• v.17 no.5
• /
• pp.322-327
• /
• 2008

LGP is a key component of LCD back light unit because it determines brightness and sharpness of the display image. Usually, it has optical patterns fabricated on the bottom surface. These optical patterns convert point or line sources placed in the side of LGP to plane source at the top surface by changing the propagating direction of the incident light. In the present paper the LiGA-reflow method was applied to fabricate the LGP mold. Furthermore, the optical simulation considering the replication ratio of pattern height was applied to the pattern design. The optical simulation through systematic correction scheme was adopted to find the optimum distribution of pattern density. Finally, the stamper fabricated by this method was installed in the mold and LGP was produced by injection molding. As a result of luminance measurement for the final product, the average luminance and luminance uniformity was measured 3,180 nit and 84%, respectively. Consequently, the mold fabrication method using the LiGA-reflow and optical simulation(CAE) can save the expense and time compared with the existing fabrication methods(laser ablation and chemical etching).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.57-64
• /
• 2008

In general, the entire of paper mulberry bark, which is not cut into pieces with an appropriate length, have been used in the pulping. This kind of pulping method couldn't accomplish the improvement of beating and sheet forming efficiency. For this reason, we investigated the effects of the cutting length of paper mulberry bast fiber on pulping and Hanji (Korean traditional paper) properties, in order to develop high quality Hanji manufacturing process. The cutting length variation of paper mulberry white bast did not great effects on pulp yields. The pulp yields based on pulping methods were sulfomethylated pulping av. 57.4%, alkali-hydrogen peroxide pulping av. 55.4%, and alkaline pulping av. 53.5% respectively. The optical properties such as brightness, opacity, scattering coefficient, and absorption coefficient were slightly improved by the increase of paper mulberry white bast cutting length. The increase of paper mulberry white bast cutting length resulted in poor sheet formation. Physical properties such as breaking length, TEA, tear index, burst index, and folding endurance were slightly improved by the increase of cutting length. The modified pulping processes, which used sulfomethylated method and alkali-hydrogen peroxide method, showed better pulp and sheet properties than conventional alkaline pulping.

• Culinary science and hospitality research
• /
• v.23 no.3
• /
• pp.29-37
• /
• 2017

This study investigated the physicochemical and sensory characteristics of white bean paste prepared with various amounts of aronia powder (as ratios of 0%, 2%, 4%, 6%, 8%, 10%). The result shows that the pH of white bean paste decreased significantly with the addition of aronia powder. From chromatography, the brightness, L-value was decreased by increasing the adding rate of aronia powder. The a-value of sample group adding 2% of aronia powder was the highest and that of sample group adding 8% was the lowest (p<0.01). Sample group adding 8% of aronia powder achieved the highest appraisal from many factors, such as springiness, cohesiveness, chewiness, brittleness, and adhesiveness. The total polyphenols and anthocyanin contents were proportionally increased with increasing the level of aronia powder added in white bean paste. The antioxidant activity measured by DPPH and NSA radical scavenging activities was significantly higher than control and increased proportionally to the aronia powder concentration. The result of sensory test shows that sample group adding 6% of aronia powder achieved the highest. Based on the above results, this study suggests that the addition of 6% aronia powder may be the best substitution ratio for white bean paste of the improvement of sensory preference and antioxidant.

• Journal of Korea Multimedia Society
• /
• v.9 no.11
• /
• pp.1455-1464
• /
• 2006

In this paper, we propose an adaptive image enhancement algorithm. The proposed algorithm is classified with the MIE technique for intensity enhancement of input image and MSE techniques for saturation enhancement. The MIE technique is proposed to control the gamut mapping problem and a sudden change in image-brightness while Luminance signal is processing, The MSE techniques are proposed to control de-saturation or over-saturation while chrominance signal is processing. The proposed algorithm is focused on processing preference color for human vision in order to generate better image quality than the algorithms focused on processing uniformly to whole images, This algorithm can be applied to a monitor, TV and other display devices for high quality image.

• Journal of Korea Multimedia Society
• /
• v.19 no.4
• /
• pp.706-716
• /
• 2016

Each year, significant amounts of Stereoscopic 3D(S3D) contents have been introduced. However, viewers who enjoy the contents readily experience a sense of fatigue on account of various factors. Consequently, many improvement studies have been conducted with the domain of disparity by, for example, simply controlling the disparity or optimizing the reaction speed of viewers' eyes to vergence. However, such studies are limited to the disparity domain and therefore are restricted to a limited number of applications. In this study, we attempted to transcend this limitation and analyzed how a reconstruction in color and brightness, as well as disparity and other important features, affects eyes in terms of vergence adaptation. As a result, we found that, the higher the color similarity is, the better it positively affects vergence adaptation during viewing. Based on this analysis, we propose in this paper a similar color extraction method between takes that are applicable to real-life situations. In an evaluation, the algorithm was applied to publicly available S3D contents and produced a converted color optimized image. The vergence adaptation time of this applied contents was significantly decreased. Also it was minimized through color reconstruction, thereby, being resulted in enhancing viewer concentration.