• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.237.2-237.2
• /
• 2013

ReRAM cell, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of conductive filament in a solid electrolyte [1,2]. Especially, Chalcogenide-based ReRAM have become a promising candidate due to the simple structure, high density and low power operation than other types of ReRAM but the uniformity of switching parameter is undesirable. It is because diffusion of ions from anode to cathode in solid electrolyte layer is random [3]. That is to say, the formation of conductive filament is not go through the same paths in each switching cycle which is one of the major obstacles for performance improvement of ReRAM devices. Therefore, to control of nonuniform conductive filament formation is a key point to achieve a high performance ReRAM. In this paper, we demonstrated the enhanced repeatable bipolar resistive switching memory characteristics by spreading the Ag nanocrystals (Ag NCs) on amorphous GeSe layer compared to the conventional Ag/GeSe/Pt structure without Ag NCs. The Ag NCs and Ag top electrode act as a metal supply source of our devices. Excellent resistive switching memory characteristics were obtained and improvement of voltage distribution was achieved from the Al/Ag NCs/GeSe/Pt structure. At the same time, a stable DC endurance (>100 cycles) and an excellent data retention (>104 sec) properties was found from the Al/Ag NCs/GeSe/ Pt structured ReRAMs.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.2
• /
• pp.233-242
• /
• 2014

PURPOSE: The purpose of this study was to determine the correlation between the hip adductor muscles and abdominal muscles during bridge exercise. METHOD: Participants who met the criteria for this study(n=36) were divided into the three groups. The first experimental group performed normal bridge exercises and the second group performed bridge exercises with the contraction of the hip adductor muscles and the control group didn't perform any exercise. Transversus abdominis muscle thickness was measured by ultrasound imaging with a special transducer head device, at pre exercise, after 2 weeks, 4 weeks, and 6 weeks. RESULT: Data were analyzed using repeated ANOVA with the level of significance set at ${\alpha}=.05$. Transversus abdominis muscle thickness was influenced by contraction of the hip adductor muscles during bridge exercise in people without lower back pain. Compared with normal bridge exercise, transversus abdominis muscle thickness significantly increased in thickness during bridge exercise with contraction of the hip adductor muscles(p<.05). CONCLUSION: The results from this study showed that contraction of the hip adductor muscles during bridge exercise increased change in the transversus abdominis muscle thickness. These results can be a good source to prevent low back pain due to hip adductor weakness. Therefore, inducing activation of hip adductor with abdominal stabilizing exercise is more effective in patients with low back pain.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.7 no.2
• /
• pp.208-214
• /
• 2004

Purpose: The prognosis of neonates with cholestasis is not clear. Some factors, such as high peak bilirubin levels and liver histologic findings have been claimed to affect the prognosis adversely. Our study aims to define which factors influence the prognosis of neonatal intrahepatic cholestasis. Methods: Retrospective reviews of the medical records were performed in 32 cases with neonatal intrahepatic cholestasis, who were admitted to Department of Pediatrics, Pusan National University Hospital from July 1995 to July 2002. Neonates were classified into 2 groups according to the duration of elevated serum alanine aminotransferase (ALT) levels more or less than 6 months. The data, such as biochemical, histopathologic and radiologic findings, were compared in both groups. Biochemical data included mean peak level of serum ALT, total bilirubin, direct bilirubin, and alkaline phosphatase. Histologic parameters related to lobular architecture, fibrosis, inflammatory infiltration and degenerative features of hepatocytes were arbitrary estimated on a scale of 1 to 3. Results: There were 19 males and 13 females, whose mean age was 48 days (14~77 days). The peak serum ALT levels were higher in the poor outcome group. Ductular proliferation and portoportal bridging were more severe in the poor outcome group. But the degree of multinucleated hepatocytes, hepatocellular swelling and canalicular plug did not appear to be significantly related to the long-term outcome. The DISIDA scintigraphy by visualization time of gall bladder and intestine was not useful in predicting outcome of neonatal intrahepatic cholestasis. Conclusion: Neonates who have intrahepatic cholestasis with high serum ALT levels, severe ductular proliferation and portoportal bridging in the liver biopsy specimen should be carefully followed up because they may have a poor prognosis.

• Journal of Distribution Science
• /
• v.16 no.5
• /
• pp.71-81
• /
• 2018

Purpose - Our research aims to investigate the mediating effect of employee creativity on the relationship between intrinsic motivation and job performance using relationship using Chinese department salespeople samples. Another objective of this study is to be clear boundary conditions that strengthen or weaken the effects of intrinsic motivation on work outcomes (i.e., employee creativity and job performance). Drawing on JD-R theory, we suggest that the two types of coworker support play differential moderating roles in the intrinsic motivation, employee creativity relationship by increasing or decreasing job resources and demands in different ways. Research design, data, and methodology - This empirical study data were collected from gathered from a sample of full time salespeople in China. A total of 550 questionnaires were distributed and 300 responses were collected, indicating a response rate of 84.0%. Working with a sample of 300 salespeople working in a department store in China. SPSS 18.0, Process 2.16 Macro, and M-Plus 8.0 software were used in the data analysis. Descriptive statistics were used to evaluate the distribution of the employee profiles and correlations between variables. M-Plus 8.0 software was used to test the model fit, validity and reliability of the variables. Finally, all research hypotheses was estimated by SPSS Macro 2.16. Results - To test our research hypotheses, we employed an analytical strategy suggested by Hayes (2013; 2015) and Shrout and Bolger (2002). In this study, we tested the relationship between intrinsic motivation and job performance throughout employee creativity. Results showed intrinsic motivation and job performance was partially mediated by employee creativity. The positive relationship between intrinsic motivation and employee creativity when coworker emotional support was high than when it was low. In contrast, the positive association between intrinsic motivation and employee creativity was stronger when coworker instrumental support was low than when it was high. Coworker emotional and instrumental support further moderated the indirect effect of intrinsic motivation on job performance through employee creativity. Conclusions - This study extends the conceptual model and empirical researches in coworker supports literature by representing a fundamental mechanism of how salespeople's intrinsic motivation and job performance throughout employee creativity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.2
• /
• pp.82-89
• /
• 2007

Glass-ceramics were fabricated by heat-treating a glass at $700^{\circ}C$/10hr which was obtained by melting a glass frit mixed with $40{\sim}80 wt%$ EAF dust at $1300^{\circ}C$/1hr. Dependence of crystal phase and bonding state change upon a compositional change and heat treatment condition were studied and the results was connected to the toxic characterization leaching procedure (TCLP) test data to investigate a chemical durability of the specimens. Increasing dust in a glass shifted the peak around $1000cm^{-1}$ to the lower frequency which was composed of two vibration peaks for the nonbridging oxygen at $960cm^{-1}$ and the bridging oxygen at $1050{\sim}1060cm^{-1}$. Also, the $B_2O_3$ structure of boroxol ring changed to a tetrhedral-, trigonal- and di-borate with dust addition. The Fe-O peaks in the glass-ceramics were observed which is consitent with XRD results of spinel formation. The surface of glass after TCLP test was severely cracked while there was no cracks on a glass-ceramics after TCLP test so the chemical durability of the glass-ceramics is superior than that of glass. The leaching concentration of Fe for the glass-ceramics containing EAF dust 80 wt% is 1/15 times lower than that of glass. The Zn leaching concentration fur the glass-ceramics containing dust < 70 wt% was higher than that of glass but its trend was reversed for the specimen of dust content > 80 wt% which could be concluded as correlated with occurrence of willemite phase.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.5
• /
• pp.317-322
• /
• 2011

Sertraline HCl, (1S-cis)-4-(3, 4-dichloro-phenyl)-1, 2, 3, 4-tetrahydro-N-methyl-l-naphthalenamine hydrochloride, is a potent and selective serotonin reuptake inhibitor which is used in the treatment of depression and obsessivecompulsive disorders. The purpose of the present study was to evaluate the bioequivalence of two sertraline HCl tablets, Traline tablet (Myungin Pharm. Co. Ltd.) and Zoloft$^{(R)}$ tablet (Pfizer Inc.), according to the guidelines of the Korea Food and Drug Administration (KFDA). The in vitro release of sertraline from the two sertraline HCl formulations was tested using KP VIII Apparatus II method with various dissolution media. Twenty four healthy Korean male volunteers, $23.50{\pm}1.74$ years in age and $64.09{\pm}7.10\;kg$ in body weight, were divided into two groups and a randomized $2{\times}2$ crossover study was employed. After a single tablet containing 50 mg as sertraline HCl was orally administered, blood samples were taken at predetermined time intervals and the concentrations of sertraline in serum were determined using an online columnswitching HPLC method with UV/Vis detection. The dissolution profiles of two formulations were similar in all tested dissolution media. The pharmacokinetic parameters such as $AUC_t$, $C_{max}$ and $T_{max}$ were calculated, and computer programs (Equiv Test and K-BE Test) were utilized for the statistical analysis of the parameters using logarithmically transformed $AUC_t$, $C_{max}$ and un-transformed $T_{max}$. The results showed that the differences between two formulations based on the reference drug, Zoloft$^{(R)}$ tablet, were 0.04, 3.26 and -1.29% for $AUC_t$, $C_{max}$, and $T_{max}$, respectively. There were no sequence effects between two formulations in these parameters. The 90% confidence intervals using logarithmically transformed data were within the acceptance range of log0.8 to log1.25. Thus, the criteria of the KFDA bioequivalence guideline were satisfied, indicating Traline tablet was bioequivalent to Zoloft$^{(R)}$ tablet.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.2
• /
• pp.117-123
• /
• 2011

Loxoprofen sodium, a 2-phenylpropionate non-steroidal anti-inflammatory drug (NSAID), has marked analgesic and antipyretic activities and relatively weak gastrointestinal ulcerogenicity. The purpose of the present study was to evaluate the bioequivalence of two loxoprofen sodium tablets, Hana loxoprofen sodium tablet (Hana Pharm. Co., Ltd.) and Dongwha Loxonin$^{(R)}$ tablet (Dongwha Pharm. Co., Ltd.), according to the guidelines of the Korea Food and Drug Administration (KFDA). The in vitro release of loxoprofen from the two loxoprofen sodium formulations was tested using KP IX Apparatus II method with various dissolution media. Twenty four healthy Korean male volunteers, $22.83{\pm}1.862$ years in age and $69.92{\pm}9.14$ kg in body weight, were divided into two groups and a randomized $2{\times}2$ crossover study was employed. After a single tablet containing 60 mg as loxoprofen sodium was orally administered, blood samples were taken at predetermined time intervals and the concentrations of loxoprofen in serum were determined using a online column-switching HPLC method with UV/Vis detection. The dissolution profiles of two formulations were similar in all tested dissolution media. The pharmacokinetic parameters such as $AUC^t$, $C_{max}$ and $T_{max}$ were calculated, and computer programs (Equiv Test and K-BE Test 2002) were utilized for the statistical analysis of the parameters using logarithmically transformed $AUC_t$, $C_{max}$ and un-transformed $T_{max}$. The results showed that the differences between two formulations based on the reference drug, Dongwha Loxonin$^{(R)}$ tablet, were 2.03, 2.99 and -9.49% for $AUC_t$, $C_{max}$, and $T_{max}$, respectively. There were no sequence effects between two formulations in these parameters. The 90% confidence intervals using logarithmically transformed data were within the acceptance range of log0.8 to log1.25 (e.g., log0.9831~log1.0535 and log0.9455~log1.1386 for $AUC_t$ and $C_{max}$, respectively). Thus, the criteria of the KFDA bioequivalence guideline were satisfied, indicating Hana loxoprofen sodium tablet was bioequivalent to Dongwha Loxonin$^{(R)}$ tablet.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.307-313
• /
• 2014

In order to predict the post-cracking tensile behavior of fiber reinforced concrete, it is necessary to evaluate the fiber orientation factor which indicates the number of fibers bridging a crack. For investigation of fiber orientation factor on a circular cross-section, in this paper, cylindrical steel fiber reinforced concrete specimens were casted with the variables of concrete compressive strength, circular cross-section size, fiber type, and fiber volumetric ratio. The specimens were cut perpendicularly to the casting direction so that the fiber orientation factor could be evaluated through counting the number of fibers on the circular cross-section. From the test results, it was investigated that the fiber orientation factor on a circular cross-section was lower than 0.5 generally adopted, as fibers tended to be perpendicular to the casting direction. In addition, it was observed that the fiber orientation factor decreased with an increase of the number of fibers per unit cross-section area. For rational prediction of the fiber orientation factor on a circular section, a rigorous model and a simplified equation were derived through taking account of a possible fiber inclination angle considering the circular boundary surface. From the comparison of the measured data and the predicted values, it was found that the fiber orientation factor was well predicted by the proposed model. The test results and the proposed model can be useful for researches on structural behavior of steel fiber reinforced columns with a circular cross-section.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.184-189
• /
• 2002

This study, compared with data of PbO-base glass system is a part of new glass composition design with Bi-base composition for PDP Rib. As $Bi_2O_3-B_2O_3-ZnO$ glass composition including Bi, which have similar density value and work facility to PbO, properties of softening point, thermal expansion coefficient, chemical durability, dielectric constant, and structural changing by XPS were investigated. $Bi_2O_3-B_2O_3-ZnO$ glass system, added 50∼80 wt% $Bi_2O_3$ widely, were presented 400∼480$^{\circ}C$ softening temperature, $68{\sim}72{\times}10^{-7}/^{\circ}C$ thermal expansion coefficient and 13∼25 dielectric constant. These results were showed similar physical properties with Pb-base glass system of same composition content, application possibility as starting composition of rib material was identified through micro-control of components and physical properties. The bonding energy of $O_{1s}$ as the $Bi_2O_3$ content decreasing was increased and full width at half-maximum (FWHM) was decreased, which is caused by non-bridging oxygen increasing.

• Composites Research
• /
• v.32 no.6
• /
• pp.327-334
• /
• 2019

The delamination is a special mode of failure occurring in composite laminates. Several numerical studies with finite element analysis have been carried out on the delamination behavior of unidirectional composite laminates. On the other hand, the fracture for the multi-directional composite laminates may occur not only along the resin-fiber interface between plies known as interply or interlaminar fracture but also within a ply known as interyarn or intralaminar fracture accompanied by matrix cracking and fiber bridging. In addition, interlaminar and intralaminar cracks appear at irregular proportions and intralaminar cracks proceeded at arbitrary angle. The probabilistic analysis method for the prediction of crack growth behavior within a layer is more advantageous than the deterministic analysis method. In this paper, we analyze the crack path when the mode I load is applied to the cross-ply carbon/epoxy composite laminates and collect and analyze the probability data to be used as the basis of the probabilistic analysis in the future. Two criteria for the theoretical analysis of the crack growth direction were proposed by analyzing the stress field at the crack tip of orthotropic materials. Using the proposed method, the crack growth directions of the cross-ply carbon/epoxy laminates were analyzed qualitatively and quantitatively and compared with experimental results.