• 한국구조물진단유지관리공학회 논문집
• /
• 제13권2호통권54호
• /
• pp.189-198
• /
• 2009

본 연구에서는 시공된 실제 현수교에 구축된 계측 모니터링 시스템의 성능을 확인하고, 이 모니터링 시스템을 사용하여 대상교량의 거동특성에 대한 정량적인 정보를 획득하기 위하여 현장재하시험을 수행하였다. 현장재하시험은 정적재하시험, 동적재하시험 및 충격재하시험으로 구성되었으며, 재하시험을 수행함에 앞서 시험결과를 사전에 예측 및 검증하기 위하여 포괄적인 구조해석을 수행하였다. 재하시험 결과는 구조해석결과와 비교하여 면밀하게 분석하였으며, 비교분석 결과 계측값이 구조해석값보다 약 30~50% 정도 작은 값으로 평가되어 대상교량의 우수한 구조성능을 확인하였다. 또한, 대부분의 계측값이 유효한 범위 내에서 측정되는 것을 확인하여 대상교량에 구축된 계측 모니터링 시스템에 대한 신뢰성과 효율성을 검증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.188-193
• /
• 2008

According to introduce KTX in Korea, rail-road bridge section of KTX was increased approximately 50% of the total length. Bridge is required periodic inspection and check to prevent accident and hazard because various damage which have effects on traffic and replacement of damaged parts is difficult. Specifically, the train as large-scale transportation because accidents led to great damage, preventing these accidents are critical. Well-organized management and maintenance systems are required to prevent the accidents. In the case of roadway bridge, bridge inspection vehicle is used to deploy inspectors in roadway bridge. However, this method requires a lot of time and efforts, and inspectors are exposed to potential hazard. Also, surrounding environment like poor lighting system or electric wire could harm the inspector while repairing. Due to this reason, automatic repairing and inspecting system have been introduced to replace the old methods. Management system of the railroad bridge track for trains uses various advanced equipments, but whereas roadway bridge management system is lacking these efforts. As a result of that, this study looks over the existing management method. and review the method to apply the Bridge Inspection Robot in railroad bridge. Moreover, this study suggests future management technology using inspection robot.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.401-410
• /
• 2007

Form the application of long rail system the non-ballast steel plate bridges, fatigue strength increase and rail noise reduction can be expected. This is mainly form the reduction of the rail impact at the rail joint locations which already made to behave together from welds. In the high speed rail, application of long rail system is essential because without long rail system, the required serviceability level can not be achieved. But even with this long rail systems, the thermal expansion from the girder can not be absorbed in the normal bearing systems, and these expansion cause between girder and rail. Also unexpected rail buckling and fracture through rail thermal tension may happen. It was found through numerical analysis and field measurement that these problems can be avoided by semi-fixed bearing system. In this study, the benefits of non-ballast plate bridge through long rail system, especially at the point of girder stability, girder stiffness increase and bearing maintenance will be reviewed.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.365-376
• /
• 2005

A prototype of the Bridge Transported Servo Manipulator (BTSM) system has been developed to do operation and maintenance jobs remotely in a hot cell. The system consists of a telescopic transporter, a slave arm, a master arm, and a control system. In this paper, the system is introduced and several performance test results are presented. The results have been used to design an upgraded system that will be used during demonstrations of the advanced spent fuel conditioning process.

• 대한토목학회논문집
• /
• 제32권4D호
• /
• pp.387-396
• /
• 2012

교량은 사회간접자본에 해당되는 시설물이다. 본 연구에서는 교량 유지관리 대안들에 대한 경제성 평가방법을 제안하고 이를 검증해 보았다. 각 대안들을 동일시점 기준으로 평가하기 위해 기저년도와 평가년도 개념을 도입하여 적용하였으며, 각 비용발생시기에 따라 이자율이나 할인율을 적용하였다. 본 연구에서는 유지관리 대안의 평가대상을 공사비용에 국한하지 않고, 평가기간을 정하여 유지관리 대안으로 인해 발생되는 관리비용 및 잔존가치를 평가하는 방법을 제안하였다. 직접공사비와 연금현재가치계수를 통해 유지관리 비용산정과 평가방법을 제시하였고, 기저년도를 기준으로 하는 잔존가치 산정방법을 제시하였다. 또한, 경제성 평가시스템을 제안하였고 검증을 통해 계산방법과 그 결과를 분석하여 제시하였다. 제안한 시스템은 실무에 적용할 수 있을 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.145-155
• /
• 2002

It is essential for health monitoring of a cable-stayed bridge to provide more accurate and enough information from the sensors. In experimental modal testing, the chosen measurement locations and the number of measurements have a major influence on the quality of the results. The choice is often difficult for complex structures like a cable-stayed bridge. It is extremely important a cable-stayed bridge to minimize the number of sensing operations required to monitor the structural system. In order to obtain the desired accuracy for the structural test, several issues must take into consideration. Two important issues are the number and location of response sensors. There are usually several alternative locations where different sensors can be located. On the other hand, the number of sensors might be limited due to economic constraints. Therefore, techniques such as methodologies, algorithms etc., which address the issue of limited instrumentation and its effects on resolution and accuracy in health monitoring systems are paramount to a damage diagnosis approach. This paper discusses an optimum sensor placement criterion suitable to the identification of structural damage for continuous health monitoring. A Kinetic Energy optimization technique and an Effective Independence Method are analyzed and numerical and theoretical issues are addressed for a cable-stayed bridge. Its application to a cable-stayed bridge is discussed to optimize the sensor placement for identification and control purposes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.586-589
• /
• 2006

Recently, the application area of wireless LAN(Internet) and CDMA have been increased, rapidly. Bridge monitoring system using this ubiquitous Computing Technology can bring more convenience of bridge maintenance and management. This paper present a automatic data acquisition, control and processing technology through this concept, and check system applicability to the concrete bridge completed. Finally, The preventive bridge monitoring through the application of this system will progress in technology and make civil infrastructure more safe and useful.

• 한국철도학회논문집
• /
• 제13권1호
• /
• pp.71-77
• /
• 2010

대부분의 선진국에서 교량의 유지보수 및 보강(Maintenance Repair & Rehabilitation-MR&R)으로 인한 비용은 해마다 증가하고 있다. 전산화된 교량유지관리 및 의사결정시스템(Bridge Management System-BMS)은 가능한 최저의 생애주기비용(Life Cycle Cost - LCC)에 최적의 안정성를 확보하기 위해 개발되었다. 본 논문에서는 제한된 현존하는 교량진단기록을 이용하여 현존하지 않는 과거의 교량상태등급 데이타를 생성하기 위해 Backward Prediction Model(BPM)이라 불리는 인공신경망(Artificial Neural Network-ANN)에 기초한 예측모델을 제시한다. 제안된 BPM은 한정된 교량 정기점검기록으로부터 현존하는 교량진단기록과 연관성을 확립하기 위해 교통량과 인구, 그리고 기후 등과 같은 비구조적 요소를 이용하며, 제한된 교량진단기록과 비구조적 요소 사이에 맺어진 연관성을 통해 현존하지 않는 과거의 교량상태등급 데이타를 생성할 수 있다. BPM의 신뢰도를 측정하기 위하여 Maryland DOT로 부터 얻어진 National Bridge Inventory(NBI)와 BMS 교량진단자료를 이용하였다. 이중 NBI자료를 이용한 Backward comparison 에 있어서 실제 NBI기록과 BPM으로 생성된 교량상태등급과의 차이(상판: 6.68%, 상부구조부: 6.61%, 하부구조부: 7.52%)는 BPM으로 생성된 결과의 높은 신뢰도를 보여준다. 이 연구의 결과는 제한된 정기점검 기록으로 야기되는 BMS의 장기 교량손상 예측에 관련된 사용상의 문제를 최소화하고 전반적인 BMS 결과의 신뢰도를 높이는데 기여 할 수 있다.

• Structural Monitoring and Maintenance
• /
• 제1권4호
• /
• pp.357-369
• /
• 2014

In the existing bridge management systems, assessment of the structural behavior is based on the results of visual inspections in which corresponding condition states are assigned to individual elements. In this process, limited attention is given to the correlation between bridge elements from structural perspective. Also, the uncertainty of parameters which affect the structural capacity is ignored. A system reliability-based assessment model is potentially an appropriate replacement for the existing procedures. The aim of this research is to evaluate the system reliability of existing conventional Steel-Reinforced bridge decks over time. The developed method utilizes the reliability theory and evaluates the structural safety for such bridges based on their failure mechanisms. System reliability analysis has been applied to simply-supported concrete bridge superstructures designed according to the Canadian Highway Bridge Design Code (CHBDC-S6) and the deterioration pattern is achieved based on the reliability estimates. Finally, the bridge condition index of an old existing bridge in Montreal has been estimated using the developed deterioration pattern. The results obtained from the developed reliability-based deterioration model and from the evaluation done by bridge engineers have been found to be in accordance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.1074-1079
• /
• 2002

Long term measurement data on the bridge response caused by moving loads are fundamental ingredient to the development or improvement of the new bridge design. In addition, proper establishment of the systematic analysis and diagnosis together with the maintenance system become the essential procedure to the effective repair/reinforcement/retrofit of not only the high speed but also the conventional railway bridges. Therefore, the real time health monitoring system on the important railway bridges should be enhancing the proper maintenance of the structures. The main objective of this study is, therefore, to develop a monitoring device including Weigh-In-Motion (WIM) function and the emphasis is place on the easy and economic installation of the developed system in the field condition.