• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.243-250
• /
• 1998

From early plane-table photogrammetry through the analog and analytical stages, photogrammetry has now reached the digital photogrammetry stage using the image stored at computers. Digital Photogrammetry using aerial photograph generates the DTM and digital orthophoto. Expecially, DTM is important for improving the accuracy of digital ortho photo. so Many experimental are required. In this study, therefore deals with the generation process of digital orthophotos using DTM with breakline and without breakline.

• Journal of Ocean Engineering and Technology
• /
• v.8 no.2
• /
• pp.64-79
• /
• 1994

In this study, terrain classification, which was done by using the quantitative classification parameters and suitable interpolation method was applied to improve the accuracy of digital elevation models, and to increase its practical use of aerial photogrammetry. A terrain area was classified into three groups using the quantitative classification parameters to the ratio of horizontal, inclined area, magnitude of harmonic vectors, deviation of vector, the number of breakline and proposed the suitable interpolation. Also, the accuracy of digital elevation models was improved in case of large grid intervals by applying combined interpolation suitable for each terrain group. As a result of this study, I have an algorithm to perform the classification of the topography in the area of interest objectively and decided optimal data interpolation scheme for given topography.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.1
• /
• pp.67-74
• /
• 1998

This paper performed terrain analysis using DTM(digital terrain model) with TIN/ GRID structure on PC environment. Contour layer from 1:5,000 scale map was used to produce DTM. DTHs were produced with and without considering breakline for each data structure. Processing time, file size, mean elevation and standard variation were analyzed for each DTM. slope map, aspect map were analyzed for grid structure with consideration of TEX>$5\times{5m},\;l0\times{10m},\;15\times{15m},\;l0\times{30m},\;45\times{45m},\;60\times{60m}$ cell size respectively. The results suggest following; The incorporation of breakline does improve mapping accuracy for highly disturbed landscape, Mean elevation doesn't increase as the grid size increases, while processing time, storage room is significantly lessened. Thus, the optimal grid size must be determined in advance for efficient application. slope decreases, while aspect increases as grid size is increasing.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.49-55
• /
• 2006

Nowadays, flood hazard maps have been generated to minimize the damages from the flooding. To generate such flood hazard maps, LiDAR data can be used as data source with higher data accuracy. LiDAR data, however, requires relatively higher cost and longer processing time. In this background, this study proposed DEM generation using NGIS digital topographic maps. For that, breaklines were processed to count directions of water flows. In addition, the river profile data, unique data source to represent real topography of the river area, were integrated to the breaklines to generate DEM. City of Kuri in Kyunggi Province was selected for this study and 1:1,000 and 1:5,000 topographic maps were integrated to process breaklines and river profile data were also linked to generate DEM. The generated DEM showed relatively lower vertical accuracy from mixing 1:1,000 and 1:5,000 topographic maps since 1:1,000 topographic maps were not available for some portion of the area. However, the DEM generated demonstrated reasonable accuracy and resolution for flood map generation as well as higher cost saving effects. On the contrary, for more efficient utilization of NGIS topographic maps, periodic map updating needs to be made including technical consideration in building breaklines and applying interpolation methods.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.30-31
• /
• 2005

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.3
• /
• pp.234-240
• /
• 2005

In this study, we have prepared three kinds of enteric tablet coating formulations for prevention the crack incidence and enhanced process improvement of enteric tablet using aqueous system. we determined the mechanical strength of three formulatons on the enteric film-coating process. The compared experiment of one-layer and two-layer (A), (B) coating treated having placebo tablets without breakline and logo. In result, the breaking force time of two-layer (B) film strength was found to increase 0.8min than two-layer (A). We confirmed the half reduction of working hour and the simplification in the one-layer coating process, and the coating troubles was solved as setting up a dehumidifier in inlet of coater. In result, we recovered that optimum running capacity(g/kg) of dehumidifier is 10g/kg and below.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.66-71
• /
• 2009

최근 가상도시, 위치기반시스템 등 여러 분야에서 도심지역의 고해상도 DSM의 수요가 증가하고 있다. 고해상도 DSM을 획득하는데 항공 라이다 측량은 가장 효율적이고 경제적인 방법으로 인정받고 있다. 그러나 레이저 펄스는 도시건물의 모서리와 코너보다는 주로 표면에서 반사되기 때문에 일반적으로 라이다 DSM은 명확한 수직 breakline을 포함하기 힘들다. 이에 본 연구에서는 라이다 데이터와 항공영상의 결합을 통해서 고품질의 도시지역 DSM을 생성하는 새로운 방법을 제안하고자 한다. 제안된 방법은 (1) 서로 다른 두 센서에서 획득된 라이다 데이터와 영상의 기하 정합, (2) 라이다 데이터를 이용한 영상정합, (3) 영상정합을 통해 획득된 지상점과 라이다 데이터를 이용한 DSM 생성순으로 이루어진다. 영상 정합을 위한 지상점의 초기값으로 대상지의 평균고도를 높이로 사용하는 것이 아니라 라이다 데이터로부터 얻어진 높이를 사용한다면 영상 정합이 아주 정밀하게 이루어 질 수 있다. 이와 함께 정합된 영상으로부터 얻어진 지상점은 라이다 데이터 보다 더 높은 밀도를 갖게 된다. 따라서 DSM 생성을 위한 격자에 라이다 데이터와 영상정합의 결과로 얻어진 지상점 모두를 내삽에 이용하여 DSM을 생성하고자 한다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.449-454
• /
• 2004

Nowadays, flood hazard maps have been generated to minimize the loss of human lives due to flooding domestically. To generate the flood hazard maps, LiDAR data have mainly been used to provide topographic data. The LiDAR data requires, however, relatively higher cost and processing time. Therefore, the needs of validating possible use of topographic maps as an alternative source of LiDAR, which have been already existed from the NGIS project over the nation, has been raised. In this background, this study has generated a DEM over City of Kuri as a pilot study using conventional 1:1,000 and 1:5,000 topographic maps emphasizing the linkage of river profile with breakline processing algorithm to build the essential topographic data as accurate as possible. The results showed that the RMSE from topographic maps and LiDAR were 3.49 and 2.282 meter, respectively. Further study needs to be made to decide possible use of topographic maps instead of LiDAR including more easier updating of topographic maps to support flood map generation. In addition, 1:1,000 topographic mapping, which is limited to the urban areas so far, needs to be extended to the river areas.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.113-119
• /
• 2003

Building information is extremely important for many applications within the urban environment. Sufficient techniques and user-friendly tools for information extraction from remotely sensed imagery are urgently needed. This paper presents an automatic and manual approach for extracting footprints of buildings in urban areas from airborne Light Detection and Ranging (LIDAR) data. First a digital surface model (DSM) was generated from the LIDAR point data. Then, objects higher than the ground surface are extracted using the generated DSM. Based on general knowledge on the study area and field visits, buildings were separated from other objects. The automatic technique for extracting the building footprints was based on different window sizes and different values of image add backs, while the manual technique was based on image segmentation. A comparison was then made to see how precise the two techniques are in detecting and extracting building footprints. Finally, the results were compared with manually digitized building reference data to conduct an accuracy assessment and the result shows that LIDAR data provide a better shape characterization of each buildings.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.169-177
• /
• 2000

The modelling technique on the terrain of real-world in geo-spatial information system is a primary element for geo-information processing. This paper is designed to make use of TIN in geo-spatial information system and study the development and application of high-precision 3-D spatial analysis technique applied to terrain features. According to this research, MODEL 3 applied to breakline in mild slope/steep slope and MODEL 2 applied to peak in complex region show relatively low RMSE. This consequence proves that these two models have high precision in comparison with other models. This study also finds out optimal routines in the estimation method of slope grade and in the construction method of surface. N_T, LSP_T and LSQ_T in mild slope, N_T in steep slope, and LSQ_T in complex region turn out to be the optimal routines for high-precision 3-D spatial analysis.