• Korean Journal of Plant Resources
• /
• v.37 no.1
• /
• pp.79-86
• /
• 2024

This study was conducted to determine the conditions for breaking dormancy in the seeds of the North Korean plant resource, Trollius macropetalus, and to investigate its germination characteristics. The morphological characteristics and viability of T. macropetalus seeds were examined. Germination characteristics were investigated based on temperature conditions (15/6℃ & 25/15℃), cold stratification treatment, and GA₃ treatment. The results showed that cold stratification treatment had no effect on breaking the dormancy of T. macropetalus. GA₃ treatment significantly increased the germination rate of T. macropetalus and also improved the mean germination days and germination speed. However, compared to the 15/6℃ condition, the effectiveness of GA₃ treatment for T. macropetalus decreased under the 25/15℃ condition. It was determined that T. macropetalus have a nondeep-type morpho-physiological dormancy. The most effective conditions for breaking dormancy were found to be the 15/6℃ temperature condition and GA₃ treatment at 500 mg·L^-1. The findings of this study are expected to provide valuable information for the mass propagation of T. macropetalus, which has potential applications in landscaping and pharmaceutical materials.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.9
• /
• pp.391-396
• /
• 2005

In this paper the modeling of interrupting characteristics of a high voltage current limiting fuse to be used in a power distribution system is introduced. In order to reduce the level of energy which can be absorbed by equipment during fault current flow, a high voltage current limiting fuse can generate a high voltage at the fuse terminals. Consequently it is necessary to model and analyze precisely the voltage and current variation during a CL fuse action. The characteristics of CL fuse operation modeled by electrical components have been performed with less than 6 [$\%$] errors. So the fuse designer or manufacturer can estimate the characteristics of CL fuse operation by using this modeling. The Electro Magnetic Transient Program (EMTP) is used to develop the modeling.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.78-83
• /
• 2010

The domestic 30AFs that are currently being produced show many problems due to different instantaneous trip characteristics in case of short-circuit. The troubles may cause explosion by excessive short-circuit capacities and arc emission, which results in a wide range of blackout. The function and safety of the low voltage circuit breakers installed before the end load are very important. This paper presents an idea on the safety improvement of the low voltage circuit-breakers through the analysis of instantaneous trip characteristics of domestic 30AF circuit-breakers.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.283-288
• /
• 2003

The object of this study is to investigate a fracture characteristics of static tensile test as a function of acoustic emission according to the fiber orientation $\theta=0^{\circ}C$ in carbon/epoxy composites, CFRP. On tensile loading, it was recognized that the fracture characteristics of CFRP in a unidirectional composites. Using the results of the AE analysis(a=2mm), it was found that the amplitude distributions of AE signals corresponding the matrix cracking, fiber debonding or delamination, and fiber breaking are 55~70dB(<200sec), 100dB(200~600sec), and 80dB(>600sec).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.853-863
• /
• 1999

the change of physical properties (thickness, weight, air permeability) and mechanical properties(abrasion resistance breaking load and displacement) of samples were determined after heat exposure by a RPP tester. The effect of exposure time and heat flux intensity on the changes and the relationship between physical properties and mechanical properties were investigated. FR treated cotton Kevlar/PBI and Nomex with different structureal characteristics were chosen for specimens. The changes of physical properties and mechanical properties were calculated based on their initial values before heat exposure. The longer exposure time and the high heat flux intensity the more changes of those properties. Heat flux intensity was more effective on the changes, The showed to be affected by an interplay of shrinkage and pyrolysis products loss. The changes of thickness and abrasion resistance showed to be higher for plain weave fabric and those of air permeabiliyt and breaking load and displacement for twill weave fabric. While FR treated cotton which have high RPP value experienced serious and detrimental changes after heat exposure Kevlar/PBI which has low RPP value showed no high changes. In conclusion it could be confirmed that when total performance of a protective clothing is estimated retention capability of physical and mechanical properties after heat exposure as well as RPP value must be considered.

• Textile Coloration and Finishing
• /
• v.18 no.4
• /
• pp.11-19
• /
• 2006

Black-dyed PET fabrics were sputtered with stainless steel through DC-magnetron type device to investigate the possibility of coloration effect, and then considered the morphological structure and physical characteristics such as water permeation ability and washing fastness. Change in color was estimated on the basis of CIELAB color system. The color coordination of metal plated PET was shifted to yellow-red from red-blue. Colour difference$({\Delta}E^*)$ was increased by sputtering conditions with increasing ion current and treatment time. Especially, $Lightness(L^*)$ value of PET was remarkably increased by sputtering, whereas $Chroma(C^*)$ increased gradually. From SEM analysis, rough and uneven craters were found and thickened on the fiber surfaces with longer sputtering time. And washing fastness was a little poor and absorption ability slightly decreased. There were little changes of breaking load and breaking extension. It was evident that observed uneven craters in the plated thin layer resulted in the colour change of PET fabrics by sputtering treatments.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.257-262
• /
• 2002

Numerical model introduced in this study combines wave refraction-diffraction, breaking, bottom friction, lateral mixing, and critical shear stress and three sub-models for simulating waves, currents, and bottom change were briefly discussed. Simulations of beach processes and harbor sedimentation were also described at the coast neighboring Bangpo Harbor, Anmyundo, Chungnam, where the area has suffered from accumulation of drifting sand in a small fishing harbor with a wide tidal range. We also made model test for the case of a narrow tidal range at Nakdong river's estuary area to understand the effect of water level variation on the littoral drift. Simulations are conducted in terms of incident wave direction and tidal level. Characteristics of wave transformation, nearshore current, sediment transport, and bottom change are shown and analyzed. We found from the simulation that the tidal level impact to the sediment transport is very important and we should apply the numerical model with different water level to analyze sediment transport mechanism correctly. Although the model study gave reasonable description of beach processes and harbor sedimentation mechanism, it is necessary to collect lots of field observation data, including waves, tides and bottom materials, etc. for better prediction.

• Journal of Navigation and Port Research
• /
• v.41 no.2
• /
• pp.55-62
• /
• 2017

A nearshore current or a wave-induced current is an important phenomenon in a nearshore zone, which is composed of longshore, cross-shore, and rip currents. The nearshore current is closely related to the occurrence of coastal accidents by beachgoers. A considerable number of coastal accidents by beachgoers involving the rip current have been reported at Jungmun Beach. However, in studies and observations of the nearshore current of Jungmun Beach, understanding of the rip current pattern remains unclear. In this study, a scientific approach is taken to understand the nearshore current and the rip current patterns at Jungmun Beach by numerical computation for year of 2015. From results of numerical computation, the occurrence and spatial characteristics of the rip current, and the similarities between the rip current and incident wave conditions are analyzed. The primary results of this study reveal that the rip currents are frequently generated at Jungmun Beach, especially in the western parts of the beach, and that the rip currents often occur with a wave breaking height of around 0.5 ~ 0.7 m, a wave period of around 6 ~ 8 seconds, and a breaking angle of around 0 ~ 15 degrees.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.5-8
• /
• 2003

We studied the effect of spin injection on tunneling conduction properties of intrinsic Josephson junctions formed in $Bi_2$$Sr_2$$CaCu_2$$O_{ 8＋x}$ single crystals. properties of an identical stack (10${\times}$5.0${\times}$0.030 $\mu\textrm{m}^3$) of intrinsic Josephson junctions were compared for the bias current injected through Au and Co electrodes. The suppression of the superconducting gap in the $_2$ double layers and the interlayer Josephson critical current was manifested in the tunneling current-voltage characteristics of the stacks. This effect appears to be caused by the pair breaking associated with spin-polarized carriers injected from the Co electrode into the $Bi_2$$Sr_2$$_2$O$CaCu_{ 8＋x}$ single crystal. This study may provide valuable information on clarifying the mechanism of high- $T_{c}$ superconductivity.y.y.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.255-262
• /
• 2013

The boltzmann equation is based on the particle distribution function while the Navire-Stokes equation based on the continuum theory. In order to simulate free surface flow, this paper used the Lattice Boltzmann Method of which is the discretized form. The detail study on the characteristics of the Lattice Boltzmann Method for the free surface simulation was investigated. The developed code was validated with the traditional dam breaking problem by tracking the front position of the water. A basic roles of density functions in the Lattice Boltzmann Method is discussed. To have an engineering applications, the simulation is also conducted the free surface behavior with an arbitrary wall geometry.