• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.1-9
• /
• 1997

In the single yarn spinning process by the ring spinning system, the finer the fineness of yarn and the lower the twist coefficient, the lower the breaking strength and breaking elongation. The change of yarn specific volume to yarn number agreed with Peirce's formula in the range of Ne 50 to 70, but above that range the values of the experiment are higher than that of the formula. The change of diameter of yarn to the reciprocal of the square root of yarn number agreed with Peirce's formula in the range of under 0.14, but above that value the values of the experiment are higher than that of the formula. In breaking strength variation according to twist constant of single yarn, as the twist coefficient increased, breaking strength increased. At 5.8∼6.0 of twist coefficient the maximum breaking strength was shown, but above that value breaking strength decreased. Breaking elongation also showed a similar tendency. But at 6.0∼6.5 of twist coefficient the maximum breaking elongation was shown. Also spinning tension increased as twist coefficient increased. Twist coefficient, breaking strength and breaking elongation according to the number of coils stayed almost the same. Yarn spinning tension according to the number of coils at the maximum of diameter was the lowest value. The speed of the traveller at the maximum of diameter was the highest value.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.7
• /
• pp.998-1006
• /
• 1999

This study has investigated the relation between the sewing speed and seam breaking strength applied perpendicular to the seam direction. Breaking strength efficiency breaking mode of seams were examined under various sewing conditions using three kinds of sewing threads and four kinds of fabrics. The results obtained are as follows : 1. According to the increase in sewing speed seam strength was remarkably decreased. Seam strength and its loss difference were shown variously as threads and fabrics were mixed. 2. In case of fabrics with higher strength seam strength showed higher. And the seam strength was determined by the loop strength. 3. In case of fabrics with lower strength seam strength and its difference for every sample showed lower. So the strength of fabrics dominated the seam strength than those of threads. 4. In the experiment using various fabrics and sewing threads there was a type of thread appropriate to each fabric. Fabrics and threads with have similar physical properties were shown proper seam efficiency. 5. The breaking mode was different for every sample seam that was tested.

• Journal of the Korean Home Economics Association
• /
• v.35 no.1
• /
• pp.257-262
• /
• 1997

In this thesis considering the problems shown in the usage of interlining of clothes and in the process of sewing the breaking away strength which is meant by adhesion is analysed by experimennt in which Polyamide content is dealed with at the 5 level to raise the adhesive strength by using the one-sided non woven adhesive interlining made in this country as the samples. After examing the optimum in the process of Cotton and polyester fabrics and adhered fabrics practical for blouse and jacket and analysing the breaking away strength the wanted property of matter and the change with the repeated laundry We reach at the following results. 1. The adhesive strength of the two adhered fabrics were strongly appeared in order of cotton>polyester. 2. The order of the breaking away strength by the interlinings of adhesive fabrics was A5> A4> A3> A2> A1. 3. The breaking away strength of the two adhered fabrics was weakened by the repeated laundry and the breaking away phenomena were fewer under the most suitable conditions than the various conditions.

• Journal of Ocean Engineering and Technology
• /
• v.37 no.1
• /
• pp.31-37
• /
• 2023

In this study, a fiber chain was developed to replace a steel chain using high-modulus polyethylene DM20. The pick count, wrapping count, and inner length were selected as the main design variables of the fiber chain and were analyzed to increase the breaking strength. Orthogonal array experiments were conducted, and the results were analyzed with respect to the breaking strength. The analysis revealed that the pick count and wrapping count had meaningful effects at significance levels within 5%. The main effect analysis revealed that a smaller pick count, larger wrapping count, and longer inner length caused the breaking strength to increase. With the wrapping count fixed at 1, a pick count less than -0.65, and an inner length greater than 0.38, the breaking strength was calculated to be greater than 300 kN. These results are expected be important factors in the derivation of an optimal combination of design variables to attain a fiber chain with a targeted strength.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.3
• /
• pp.85-91
• /
• 2008

Out of all the nondestructive test (NDT) methods, the pullout test is one of the most reliable techniques for estimating the strength of concrete under construction. However the pullout test inevitably produces significant surface damage because of the inherent test mechanism and costs too much for using measurement devices. In the view of construction engineers and inspectors, the main purpose of NDT methods for concrete is to verify whether the concrete strength of structure members exceeds the target strength or not. In this paper, a new pullout test method, which involves a pre-installed breaking bolt, with pre-determined breaking torques corresponding to the target strength of concrete, is introduced with related test data. The three types of test, the rebound hammer test, the pullout test, and the new pullout test with breaking bolt, were carried out on wall specimen with three types of concrete strengths. Our results show that concrete strength as evaluated by the pullout test with breaking bolt was similar with cylinder test results. Therefore it can be said that the new pullout test with breaking bolt is a useful method for checking the concrete strength without any surface damages in construction site.

• Journal of Integrative Natural Science
• /
• v.12 no.4
• /
• pp.116-121
• /
• 2019

This experiment is to evaluate the physical properties of the hydrogel lens with the addition of carbon-based nanomaterials, Graphene oxide and Carbon nanotube, and to confirm the improvement of strength. Hyaluronic acid, a hydrophilic substance, was used as an additive by using HEMA (2-hydroxyethyl methacrylate) and ethylene glycol dimethacrylate (EGDMA) as a base monomers. Graphene oxide and two types of Carbon nanotubes(Amide functionalized and Carboxilic acid functionalized) were added 0.1%, 0.3%, 0.5%, respectively, and the physical properties were analyzed by measuring water content, refractive index, breaking strength and SEM image. In the case of the sample added with each carbon nano material, the water content tended to increase for all three materials. The breaking strength tended to increase in Graphene oxide and Carbon nanotube; Carboxilic acid functionalized, but in the case of Carbon nanotube; amide fuctionalized, the breaking strength tended to decrease. However, Carbon nanotube; amide fuctionalized had the highest breaking strength among the three nano materials. Thus, the addition of certain carbon nanomaterials seems to be appropriate for improving the strength of hydrogel lenses.

• Journal of Aquaculture
• /
• v.17 no.3
• /
• pp.228-232
• /
• 2004

This study evaluates red seabream quality using physicochemical and chemoenzymatic indices. Breaking strength was correlated with moisture content and lipid content of red seabram by a precedent experiment. Moisture content (X$_1$), lipid content (X$_2$) and breaking strength (Y) were optimized with multiple regression as, Y= -2.53539＋0.05544X$_1$-0.00161X$_2$. To test the equation, red seabream (n=13) were randomly purchased and measured moisture content, lipid content and breaking strength. The calculated breaking strength using the equation was similar to breaking strength measured using Rheo meter. Adenylate energy charge (AEC), a general biochemical index of stress, values of all sample were higher than 0.8 expect two fish. Fish's condition was a good. The equation developed in this study predicts breaking strength with moisture and lipid content measured. Moreover the equation may be used in grading cultured red seabream with calculated breaking strength. Grade according to breaking strength, when it came to over 1.4 kg, was measured as high grade; when it came to below 1.2 kg, was measured as low grade. Grade according to AEC, when it came to over 0.8, was measured as high grade.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.7
• /
• pp.993-998
• /
• 2015

Possibilities of predicting eggshell ultrastructure from direct non-destructive and destructive measurements were examined using 120 Fayoumi eggs collected from the flock at 45 weeks of age. The non-destructive measurements included weight, length and width of the egg. The destructive measurements were breaking strength and shell thickness. The eggshell ultrastructure traits involved the total thickness of eggshell layer, thickness of palisade layer, cone layer and total score. Prediction of total thickness of eggshell layer based on non-destructive measurements individually or simultaneously was not possible ($R^2=0.01$ to 0.16). The destructive measurements were far more accurate than the non-destructive in predicting total thickness of eggshell layer. Prediction based on breaking strength alone was more accurate ($R^2=0.85$) than that based on shell thickness alone ($R^2=0.72$). Adding shell thickness to breaking strength (the best predictor) increased the accuracy of prediction by 5%. The results obtained indicated that both non-destructive and destructive measurements were not useful in predicting the cone layer ($R^2$ not exceeded 18%). The maximum accuracy of prediction of total score ($R^2=0.48$) was obtained from prediction based on breaking strength alone. Combining shell thicknesses and breaking strength into one equation was no help in improving the accuracy of prediction.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.32-37
• /
• 1998

The objective of this study was to analyze lodging-related traits using different cultivars from Korea, Japan, and the U.S. in direct seeded rice on dry paddy field. Stem diameter and culm wall thickness were highest in 'Caloro' followed by 'Nongan', 'M202', and 'Calrose'. All the U.S. cultivars were higher than the others in stem diameter and culm wall thickness. These two traits were important with regard to lodging. The highest breaking strength (1442g) was observed in Caloro. 'Gancheoek', 'Dongjin', and transplanted 'Hatsuboshi' showed more than 1000g in breaking strength. Lodging index was lowest in Hatsuboshi followed by Nongan and Gancheok. Even though breaking strength of the U.S. cultivars was higher than others, their lodging index values were high. There were no statistically significant differences in starch content. However, Calrose, Caloro, Dongjin, and Koshihikari were relatively higher than others in starch content. Positive correlations were found between culm base weight, lignin and breaking strength. High contents of lignin and cellulose were observed in Nongan, transplanted Hatsuboshi, Calrose, and Caloro. Traits such as stem diameter, culm wall thickness, bending moment, culm length, breaking strength, cellulose, lignin, and culm base weight were closely related to a lodging index. According to path coefficient analysis, most important traits were culm length, stem diameter, thickness of clum wall, and top plant weight.

• Fashion & Textile Research Journal
• /
• v.3 no.4
• /
• pp.357-361
• /
• 2001

This paper is concern with the effect of various conditions on mechanical properties of textile fabrics by water soluble resin treatment. Resin treatment of cotton, acetate, viscose rayon, polyester, nylon and acryl fabrics were made by aqueous resin treatment to improve the mechanical properties. The mechanical properties of fabrics, the breaking strength and strain were measured and surface reflectance was measured by color eye. The breaking strength and surface reflectance of fabrics by water soluble resin treatment showed difference by the different treatment concentration. The surface reflectance was increased by water soluble resin treatment. The breaking strength was lower in fabrics with resin treatment than fabrics with none treatment.