• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.93-99
• /
• 2013

Purpose: The aim of this study was to develop a dry eye test method using a paper based microfluidic device that improves inaccuracy caused by using one of current point-of-care dry eye tests such as Shirmer's. Methods: Wax printed hydrophilic chromatography papers were dyed with anthocyanin extracts to detect colorimetric display of liquid samples with varying pH. Fluid distribution rates were measured using artificial tears and human tears directly from 32 subjects. Results: With Shirmer's, fluid distribution rates with small amount of samples (less than $0.5{\mu}l$) were not displayed. However, with paper based microfluidic device, fluid imbibition distances over time were clearly showed. Also clinical results of dry eye from newly developed paper based microfluidic device showed correlation with the results from tear break up time tests. Conclusions: The newly developed paper based microfluidic devices were easy to use and exhibited more accurate clinical results than current dry eye point of care tests such as Shirmer's.

• The Journal of Korean Physical Therapy
• /
• v.30 no.5
• /
• pp.187-192
• /
• 2018

Purpose: This study compared the functional fitness and brake response of elderly and young drivers to confirm the correlation between the functional fitness and brake response. Methods: This study was a cross sectional observational design. Older drivers (>65age, n=21) and young adult drivers (20-40aged, n=20) were enrolled as subjects. The functional fitness of the subjects was measured using a senior fitness test consisting of a back scratch (BS), chair sit and reach (CSR), arm curl (AC), chair stand up (CSU), foot up and go (8-FUG), and 2-minute step (2-MS). The brake response used the virtual driving simulator to measure the brake reaction time (BRT) and braking distance (BD) according to the pedestrian protection and traffic signal compliance. Results: The older drivers had a lower BS (p<0.000), CSU (p=0.040), and 8-FUG (p=0.011) than the young adult drivers. BS and 8-FUG showed a significant positive correlation with the BRT and BD of pedestrian protection and traffic signal compliance. CSU showed a significant negative correlation with the BRT of pedestrian protection and traffic signal compliance. Conclusion: These findings suggest that the flexibility of the upper extremity, lower extremity strength, and agility are strongly correlated with the driving performance of elderly drivers.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.1
• /
• pp.67-74
• /
• 2013

A jet in a crossflow (JICF) has been extensively studied because of its wide applications in technological systems, including fuel injection into a ram-combustor. However, in the case of insufficient mixing performance of the liquid jet into the crossflow, the flame in a ram-combustor is unstable. In this study, the nonuniform flame and combustion instabilities due to lack of mixing performance were experimentally investigated. By performing correlations to predict the penetration height and break-up point, the spray and mixing characteristics of JICF have been studied. In particular, the improved correlations of penetration height are proposed in two distinctive domains depending on the X/d location of the crossflow.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.4
• /
• pp.53-58
• /
• 2021

Based on surrogate model, a hydrocarbon mixture was analyzed by visualizing the impinging break up mechanism in subcritical and supercritical conditions. Decane and methylcyclohexane with different critical pressures and temperatures were selected as experimental fluids. The impinging injector was installed inside the chamber, and the spray was visualized through a speed camera in subcritical and supercritical conditions. The injection condition of the mixture and chamber was kept constant at Pr(P/P_c) = 1, and Tr(T/T_c) was increased from 0.48 to 1.02. As Tr increased, the spray angle increased, and the sheet length decreased as the properties of the mixture reached each critical point. In addition, when the mixture approached the near critical point, it was shown that the change in density gradient was largely observed out of the impinging break up mechanism.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.1
• /
• pp.27-35
• /
• 2013

Purpose: The present study was conducted to investigate the changes in the physical properties of RGP lenses induced by the polishing during the process of RGP lens manufacturing, and further evaluate the differences in the actual wearer's comfort and the tear film break-up time caused by these changes. Methods: RGP lenses (fluorosilicone acrylate material) were divided into 4 groups by the different lens-polishing time like 0, 25, 50 and 100 seconds and the thickness, the surface roughness and the wetting angle of those lenses were compared. Furthermore, the comfortability of the lens wear was surveyed after applying these lenses on the subject's eyes with normal tear volume and the non-invasive tear break-up time of the wearers was measured. Results: The central thickness of 4 RGP lenses made of different lens-polishing time was not significantly different however, the lens surface was changed smoother after polishing to be confirmed by scanning electron microscopy. The wetting angle of the RGP lens significantly decreased in accordance with the increase of polishing time. Thus, the difference of approximately $16^{\circ}$ between 0 second and 100 seconds-polishing was statistically significant. The actual wearing feeling of RGP lens was tended to improve in accordance with the increase of the lens wettability however, it was not proportional improvement. The non-invasive tear break-up time of the lens wearers showed different aspect compared with the changes in lens wettability and the actual feeling of RGP lens wear. Conclusions: In this study, better lens wettability, thinner lens thickness, and/or improved lens surface induced by physical stimuli in the process of RGP lens manufacturing was not well-correlated with the increase of actual subjective/objective satisfaction in RGP lens wear. Thus, the consideration of physical properties of the lens as well as the lens wearers' physiological factors in the process of RGP lens manufacturing may be suggested.

• Journal of The Korean Ophthalmological Society
• /
• v.58 no.6
• /
• pp.706-711
• /
• 2017

Purpose: To analyze blinking patterns when watching an ultra-high definition (UHD) television and to compare the results between normal eyes and dry eyes. Methods: A total of 59 participants aged from 13 to 69 years were instructed to watch a colorful and dynamic video on a UHD television for 10 minutes. Before and after watching the UHD television, we measured the best corrected visual acuities, autorefraction, tear-break-up-time, degree of corneal erosion and conjunctival hyperemia via slit lamp biomicroscopy. In addition, questionnaires for the evaluation of eye fatigue and symptoms of a dry eye were completed. The definition of dry eye syndrome was that the tear-break-up-time of one of the eyes was less than 5 seconds, conjunctival injection, or marked corneal erosion. The number of blinks and the duration of blinking were both measured and analyzed at the early and late phases of video-watching. Results: After watching the UHD television in the normal eye group, the tear-break-up-time was significantly decreased (p < 0.001) and the degree of corneal erosion was significantly increased (p = 0.023). However, the subjective symptoms of participants were not aggravated (p = 0.080). There were no significant differences in blinking patterns in the dry eye group. On the other hand, in the normal eye group, the mean blinking time was significantly increased (p = 0.030). Conclusions: Watching an UHD television changes the tear-break-up-time, degree of corneal erosion, and blinking pattern in normal eyes, which may increase the risk of dry eye syndrome.

• Journal of the Korean Society of Costume
• /
• v.60 no.1
• /
• pp.91-100
• /
• 2010

In the rapid development of science, technology, information, cultural industry during the 21st century, hybridity is consistently shown in which different techniques, systems, and sorts in society, industry, culture, and art are combined. The purpose of this study is to analyze the formative characteristics of hybrid make-up that is shown in the field of make-up as a practical art reflecting society and culture of a specific period, to understand the tendencies of modern make-up, and to present data for predicting changes in the future. According to the results of this study, the hybrid characteristics of make-up indicate as follows. First, hybrid make-up at a timely aspect in which senses transcending times by mixed expression of traditional classicism and modernism coexist and mingled, Characteristics of hybrid make-up at a local aspect are shown in one make-up by expressing modern tendencies that break from homogeneity, uniformity, and concentration as interests in other cultures and borrowing them in modern images. Also in modern period, characteristics of hybrid make-up at a cultural aspect are shown by mixed expression of conflicting cultural factors such as modern beauty of cutting-edge technology, female & male, and elegance & activeness in one makeup. Within the multiplex, modern social system in this period of cutting-edge technology, "tendency of hybrid design" as a social, cultural phenomenon is shown to be a complex, new designing tendency due to mixture and deconstruction of various genres. Hybrid make-up, seeking diversification and open-mindedness, is predicted to be consistently developed owing to infinite materials of design, being expected to be stronger and newer in the future.

• Korean Institute of Interior Design Journal
• /
• no.38
• /
• pp.48-56
• /
• 2003

This study is purposed to find the transition of the perspective connected with visual modality. The perspective based on Greek optics and euclidean geometry and rediscovered in Renaissance represents the object according to the particular moment and the point of view, is a principal fact which affect architecture, the form of a city and the spatial organization and symbolizes an ideal of the times. It embodied perception which treats the space rationally on the basis of realism and became visual modality based on the separation of the seeing subject and the world of the object. The point of view became one with the vanishing point which made up the shape and after Renaissance for four hundred years a straight line, a right angle and a circle got to be favorite geometrical choices in architecture. A fixed point of view of the subject is getting to change and break up fundamentally by the new visual technologies of the modem times.

• 한국연소학회:학술대회논문집
• /
• 2002.06a
• /
• pp.113-122
• /
• 2002

The purpose of this study is to verify that the modified Lagrangian model can predict temperature, flow and scalar fields in the high temperature recirculation region of swirling confined diffusion flame. In the meantime numerical results from EBU and Equilibrium PDF models as well as experimental results are compared with those from the modified Lagrangian model. Adaption of three different turbulent models were accompanied with this procedure. Look-up table of the ignition characteristic time scale which is one of important factors of the Lagrangian model was referred to the 11-step reduced mechanism. Eventually, results with the Lagrangian model show a good accordance with experimental results, which shows the validity of this model. Results from Chen's model differ from those of the others. Numerical results of ${\widetilde{k}$ show significant deviation from experimental results for three models.

• 한국연소학회:학술대회논문집
• /
• 1999.10a
• /
• pp.81-91
• /
• 1999

Fuel characteristics of sewage sludge as required for the fluidized bed incinerators have been evaluated. Sewage sludge is basically a solid fuel with high percentage of moisture. Moisture content of the fuel directly affects the heating value of the fuel and the exhaust gas composition. When the sludge of transported into the incinerator, sludge cake is subject to the mixing, break-up and heat-up. Fluidization process would enhance these physical processes. The sludge fuel could then undergo the moisture evaporation and devolatilization process. Subsequent oxidation of volatiles as well as the remaining char would then follow. Sludge samples are characterized with high percentage of volatiles out of total combustibles. Quantitative understanding of above listed subprocesses would certainly help in the utilization of fluidized bed incinerators. A limited set of fuel characterization tests including calorimetric analysis, proximate analysis, elemental analysis and thermogravimetric analysis were conducted for the selected sludge samples. The measurement reasults of sludge samples were reported along with some published data. Limited experience in the actual incinerator plant is also presented.