• 제목/요약/키워드: Break-out

검색결과 600건 처리시간 0.028초

소형냉각재 상실사고시 루프밀봉 형성 및 제거에 대한 예측 (Prediction of Loop Seal Formation and Clearing During Small Break Loss of Coolant Accident)

  • Lee, Sukho;Kim, Hho-Jung
    • Nuclear Engineering and Technology
    • /
    • 제24권3호
    • /
    • pp.243-251
    • /
    • 1992
  • 소형 냉각재 상실사고시 루프밀봉 형성 및 제거에 대하여 LSTF에서 수행된 실험 SB-CL-18의 결과를 RELAP5/MOD2와 /MOD3를 이용하여 예측하였다. 본 연구는 증기발생기 상향 및 하향 유동에서의 비대칭 냉각재수용에 따른 마노메트릭 유동에 의해 노심노출의 조기발생을 야기시키는 열수력학적 현상을 예측하기 위하여 수행되었다. RELAP5/MOD2를 이용한 해석결과는 루프밀봉 형성 및 제거를 포함하여 감압사고시의 주요 현상을 전반적으로 잘 예측하고 있으나 기초 계산외 결과를 볼 때 현상 및 시간적 순서에 관련하여 몇 가지의 차이가 있었다. RELAP5/MOD3는 RELAP5/MOD2보다 전반적인 현상, 특히 증기발생기 액체수용을 보다 잘 예측하고 있으며, 또 한 RELAP5/MOD3를 이용하여 증기발생기 U자관과 펌프 흡입관의 nodalization수를 늘린 경우는 루프 밀봉제거현상과 시간적 순서를 잘 예측할 수 있었다.

  • PDF

3차원 레이저 스캐너를 활용한 터널 시공관리 (The construction management of tunnel using 3D laser scanner)

  • 이강현;허인욱;김도훈;이인모
    • 한국터널지하공간학회 논문집
    • /
    • 제13권3호
    • /
    • pp.159-176
    • /
    • 2011
  • 현재 3차원 레이저 스캐너는 게임, 영화, 의료, 미술, 디자인 분야 등 다양한 분야에서 널리 사용되고 있다. 토목분야에서는 교량 및 터널에 3차원 레이저 스캐너를 이용한 시공관리 방안 및 적용에 관한 연구가 다수 수행되었다. 그러나 3차원 레이저 스캐너로 얻어진 데이터의 용량이 너무 크고 우리나라 현장 실정에 적합한 소프트웨어가 없는 것이 현실이다. 따라서 본 연구에서는 3차원 레이저 스캐너의 데이터를 신속하게 처리할 수 있도록 데이터베이스를 구축하였으며, 터널의 미굴 여굴 여부 판단, 균열 누수 백태를 확인할 수 있는 소프트웨어를 개발하였다. 또한 실제 터널 현장에 3차원 레이저 스캐너를 사용하여 3차원 레이저 스캐너와 소프트웨어를 검증하였다. 이는 터널 시공 중 시공관리 및 시공 후 유지관리에도 기여할 수 있을 것으로 예상된다.

증기발생기 전열관 확관천이부위 축방향 관통균열의 관막음 기준에 관한 연구 (Study on Plugging Criteria for Thru-wall Axial Crack in Roll Transition Zone of Steam Generator Tube)

  • 박명규;김영종;전장환;김종민;박준수
    • 대한기계학회논문집A
    • /
    • 제20권9호
    • /
    • pp.2894-2900
    • /
    • 1996
  • The stream generator tubes represent an integral part of a major barrier against the fission product release to the environment. So, the rupture of these tubes could permit flow of reactor coolant into the secondary system and injure the safety of reactor coolant system. Therefore, if the crack was detected during In-Service Inspection of tubes the cracked tube should be evaluated by the pulgging criteria and plugged or not. In this study, the fracture mechanics evaluation is carried out on the thru-wall axial crack due to Primary Water Stress Corrosion Cracking in the roll transition aone of steam generator tube to help the assurence the integrity of tubes and estabilish the plugging criteria. Due to the Inconel which is used as tube material is more ductile than others, the plastic instability repture theory was used to calculate the critical and allowable crack length. Based on Leak Before Break concept the leak rate for the critical crack length and the allowable leak rate are compared and the safety of tubes was given.

천리안 위성 자료를 이용한 대류권계면 접힘 난류 탐지 가능성 연구 (Feasibility Study for Detecting the Tropopause Folding Turbulence Using COMS Geostationary Satellite)

  • 김미정;김재환
    • 대기
    • /
    • 제27권2호
    • /
    • pp.119-131
    • /
    • 2017
  • We present and discuss the Tropopause Folding Turbulence Detection (TFTD) algorithm for the Korean Communication, Ocean, Meteorological Satellite (COMS) which is originally developed for the Tropopause Folding Turbulence Product (TFTP) from the Geostationary Operational Environmental Satellite (GOES)-R. The TFTD algorithm assumes that the tropopause folding is linked to the Clear Air Turbulence (CAT), and thereby the tropopause folding areas are detected from the rapid spatial gradients of the upper tropospheric specific humidity. The Layer Averaged Specific Humidity (LASH) is used to represent the upper tropospheric specific humidity calculated using COMS $6.7{\mu}m$ water vapor channel and ERA-interim reanalysis temperature at 300, 400, and 500 hPa. The comparison of LASH with the numerical model specific humidity shows a strong negative correlation of 80% or more. We apply the single threshold, which is determined from sensitivity analysis, for cloud-clearing to overcome strong gradient of LASH at the edge of clouds. The tropopause break lines are detected from the location of strong LASH-gradient using the Canny edge detection based on the image processing technique. The tropopause folding area is defined by expanding the break lines by 2-degree positive gradient direction. The validations of COMS TFTD is performed with Pilot Reports (PIREPs) filtered out Convective Induced Turbulence (CIT) from Dec 2013 to Nov 2014 over the South Korea. The score test shows 0.49 PODy (Probability of Detection 'Yes') and 0.64 PODn (Probability of Detection 'No'). Low POD results from various kinds of CAT reported from PIREPs and the characteristics of high sensitivity in edge detection algorithm.

장미 식물공장 생산에서 삽수의 채취 절위와 엽면적에 따른 단경삽목묘의 발근과 신초발아 특성 (Rooting and Budbreak of Single-Stemmed Roses (Rosa hybrida L.) as Affected by Axillary Bud Position and Leaf Area of Cuttings)

  • 김완순
    • 화훼연구
    • /
    • 제17권4호
    • /
    • pp.297-302
    • /
    • 2009
  • 절화 장미의 식물공장적 생산을 위해 삽수용 모주의 성숙정도, 삽수의 채취 절위와 엽면적이 단경삽목묘(single-node cuttings)의 발근과 신초발아에 미치는 영향을 조사하였다. 모주의 성숙정도는 SNC의 발근 및 신초 발아 활성에 큰 영향을 주지는 않았다. 전체적으로 95% 이상의 발근 및 신초발아율을 나타났으며, 'Rote Rose'는 발근과 신초발아가 삽목 후 34일 경에 동시에 일어난 반면, 'Teresa'의 신초발아 소요기간은 18일로 발근보다 9일 먼저 시작되었으며 'Rote Rose'보다는 16일이나 짧았다. 삽수 채취 절위가 줄기 기부방향으로 내려갈수록 발근 및 신초발아의 소요일수는 늘어나고 발근율과 신초발아율은 감소하였다. 특히 'Teresa' 품종에서 더욱 뚜렷하였는데 신초발아의 소요일수는 최대 12일 지연되었고 신초발아율은 14.4%나 감소하였다. 또한 삽수의 엽면적이 클수록 발근 및 신초 발아율이 증가하고 소요일수도 단축되었다.

기초교양필수 프로그래밍 수업에서 성별과 프로그래밍 과목에 따른 수강생의 학습이탈동기 분석 (The Analysis of Learning Demotivation according to Gender and Programming Subjects in Programming Class' Students of Liberal Arts)

  • 유강수;김세민;홍기천;최숙영
    • 한국정보통신학회논문지
    • /
    • 제23권6호
    • /
    • pp.704-710
    • /
    • 2019
  • 프로그래밍 학습은 오랫동안 어려운 과목으로 인식되어왔다. 이를 해결하기 위하여 다양한 연구가 진행되고 있는데, 본 연구에서는 학습자 특성 중 하나인 성별을 기반으로 프로그래밍 학습에서 이탈하려는 동기에 대한 연구를 진행하였다. 본 연구에서는 스크래치를 학습하는 분반과 파이썬을 학습하는 분반을 남학생과 여학생으로 나누어 학습이탈동기의 사전-사후 설문을 진행하였다. 연구 결과로는 남학생이 여학생보다 프로그래밍 학습에 대한 자신감은 높았으나 전체적인 항목에서는 큰 차이가 없었다. 또한 성별마다 학생들이 선택한 전공에 따라서 학습이탈동기의 차이를 발견할 수 있었다. 본 연구를 통하여 프로그래밍 학습에서 학습자 특성을 고려하여 학습 효율 및 만족도를 높일 수 있는지 개선하는데 도움이 될 것이라고 기대한다.

간호대학생의 중동호흡기증후군에 대한 지식, 태도 및 예방행위 실천 간의 관계 (Correlation between Knowledge, Attitude, and Compliance of Preventive Behaviors regarding Middle East Respiratory Syndrome among Nursing Students)

  • 박진희;장수정;최수진
    • Journal of Korean Biological Nursing Science
    • /
    • 제20권4호
    • /
    • pp.252-260
    • /
    • 2018
  • Purpose: This study aimed to investigate the relationships between the level of knowledge, attitude and compliance of preventive behaviors of the Middle East respiratory syndrome (MERS) among nursing students. Methods: The study sample consisted of 219 nursing students. Through the use of a structured questionnaire, data collection was conducted from June 1st to June 30th 2015. The descriptive statistics, independent t-tests and Pearson's correlation coefficient were employed to analyze the data. Results: The score of the MERS-related knowledge was 9.15 out of 13. The participants had a positive attitude toward the MERS. The level of MERS-related knowledge was high in the case of temporary school closure or break in clinical practice because of the clinical training in hospitals that MERS occurred (t= 2.42, p= .016). The compliance level of the preventive behavior for MERS was high in female students (t= -2.11, p= .036), in the case of temporary school closure or break in clinical practice due to the clinical training in hospitals that MERS occurred (t = 3.29, p= .001), and in students that had MERS-related education for prevention (t = 2.80, p= .006). The MERS-related knowledge was positively correlated with the level of compliance for preventive behavior (r= .18, p= .009). Conclusion: To prevent MERS infection in nursing students, the level of knowledge on MERS should be enhanced so that they can practice preventive behaviors against it. Additionally, the MERS infection control education should include etiology and treatment products based on the MERS response guideline issued by the Centers for Korea Disease Control and Prevention.

리튬이온전지의 사이클 수명 모델링 (Modeling to Estimate the Cycle Life of a Lithium-ion Battery)

  • 이재우;이동철;신치범;이소연;오승미;우중제;장일찬
    • Korean Chemical Engineering Research
    • /
    • 제59권3호
    • /
    • pp.393-398
    • /
    • 2021
  • 리튬이온전지의 성능을 최적화하기 위해서는 여러 열화 요소들을 고려한 성능 예측 모델링 기술이 필요하다. 본 연구에서는 리튬이온전지의 사이클 노화로 인한 방전 거동 및 사이클 수명 변화를 수학적으로 모델링하였다. 모델링의 신뢰성을 검증하기 위해 0.25C로 사이클 시험을 진행했으며, 30 사이클 간격으로 진행한 RPT (Reference performance test)를 통해 전기적 거동을 파악하였다. 기존의 리튬이온전지의 사이클 수명 예측 모델에 BOL (Beginning of life)에서 일어나는 현상 중 하나인 Break-in 메커니즘을 반영하여 수명예측 정확도를 개선시켰다. 모델에 근거하여 예측된 사이클 수명 변화는 실제 시험 결과와 잘 일치하였다.

축소 라운드 SHACAL-2의 연관키 공격 (Related-Key Attacks on Reduced Rounds of SHACAL-2)

  • 김종성;김구일;이상진;임종인
    • 정보보호학회논문지
    • /
    • 제15권3호
    • /
    • pp.115-126
    • /
    • 2005
  • SHACAL-2는 해쉬 알고리즘 SHA-2의 압축 함수에 기반을 둔 최대 512 비트 키 크기를 가지는 256 비트 블록 암호이다. 최근에 SHACAL-2는 NESSIE 프로젝트의 256 비트 블록 암호에 선정되었다. 본 논문에서는 연관키를 이용한 두 가지 형태의 연관키 차분-비선형 공격과 연관키 Rectangle 공격에 대한 SHACAL-2의 안전성을 논의한다. 연관키 차분-비선형 공격 기법을 통하여 512 비트 키를 사용하는 35-라운드 SHACAL-2를 분석하고, 연관키 렉탱글 공격 기법을 통하여 512 비트 키를 사용하는 37-라운드 SHACAL-2를 분석한다. 본 논문에서 소개하는 512 비트 키를 가지는 37-라운드 SHACAL-2 연관키 렉탱글 공격은 SHACAL-2 블록 암호에 알려진 분석 결과 중 가장 효과적이다.

초임계 탄화수소계열 혼합유체의 이중 충돌 제트 분무 가시화 (Visualization of Doublet Impinging Jet Spray in Supercritical Mixed Hydrocarbon Fluid)

  • 송주연;최명환;안정우;구자예
    • 한국추진공학회지
    • /
    • 제25권4호
    • /
    • pp.53-58
    • /
    • 2021
  • 대체모델을 사용한 탄화수소계열 혼합유체를 아임계 및 초임계 상태에서 이중 충돌 분무를 통해 분무 메커니즘을 가시화하여 분석하였다. 임계압력과 온도가 다른 데칸과 메틸사이클로헥산을 대체모델로 선정하였다. 챔버 내부에 이중 충돌 인젝터를 설치하여 아임계 및 초임계 상태에서 고속카메라를 통해 분무를 가시화하였다. 혼합유체의 분사 및 챔버 환산압력은 Pr(P/Pc)=1로 유사하게 유지하였으며 Tr(T/Tc)은 0.48에서 1.02까지 증가시켰다. Tr이 증가할수록 혼합유체의 물성치가 각각의 임계점에 도달하여 분무각은 증가하고 시트분열길이는 감소하였다. 또한 혼합 유체가 모두 근임계점에 도달하였을 때 이중 충돌 분열 메커니즘에서 벗어나 밀도 구배의 변화가 크게 관측됨을 보였다.