• Title/Summary/Keyword: Break size

Search Result 245, Processing Time 0.028 seconds

Cost Analysis of Wrap Silage Production in the Paddy Field for Forage Crop Cropping System (답리작 사료작물의 랩사일리지 생산비 분석)

  • Ha, Yu-Shin;Park, Kyung-Kyoo
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.32 no.1
    • /
    • pp.75-84
    • /
    • 2012
  • Mechanized operation model and mechanical cultivation technology for winter barley, rye, Italian ryegrass and sudan grass wrap silage production system at the paddy field for cropping system was developed. Also, a series of experiment were performed and lots of data were collected and analyzed to develope mechanical technology, coverage area, and optimum size of the farm (break-even point) for wrap silage production system. The coverage area for winter barley or rye wrap-silage production system is determined around 61.9, 73.4, 77.5, 88.2 ha in the case of drill seeding and different ripening species by tractor power 50, 75, 100, 130 ps, respectably. The break-even point of the farming size is analyzed as 20 ha and its production cost is estimated around 367, 383, 430, 443 won/TDN-kg in the case of winter barley wrap-silage by tractor power 50, 75, 100, 130 ps, respectably. The break-even point of the farming size is analyzed as coverage area and its production cost is estimated around 237, 215 won/TDN-kg in the case of winter barley wrap silage and sudan grass by the tractor power 50, 100 ps, respectably.

A Study on the Fluctuations in Quality of Incoming Materials and Determination of the Acceptance Inspection Type with Inspection Error (검사과오를 고려한 자재의 품질변동과 수입검사방법의 결정)

  • Lee, Hoe-Sik
    • Journal of Korean Society for Quality Management
    • /
    • v.24 no.2
    • /
    • pp.54-64
    • /
    • 1996
  • The inspection policy and inspection error are very critical factors which influence the outgoing quality. In other words, such factors influence the acceptance rate of the incoming matarials. Hence, the outgoing lot size is varied. This paper presents a method to compute the break-even point(pb1, pb2) under these two factors, which canbe used to determine the economic acceptance inspection type.

  • PDF

Evaluation of Human Factors on Subtitle Content Displayed in Augmented Reality (증강현실 자막 콘텐츠 표시에 대한 휴먼팩터 평가)

  • Kim, Dae-Yeon
    • Journal of Korea Multimedia Society
    • /
    • v.25 no.5
    • /
    • pp.739-747
    • /
    • 2022
  • In this study, the effect of augmented reality subtitle content on users was investigated by using a subjective evaluation method and a statistical approach. The human factor was defined as subtitle position and font size. Then, we analyzed the effects of the defined factors on human eye comfort and visibility. Ten participants conducted related survey evaluation tasks with a 1-minute break after viewing the content for 3 minutes.

Effects of Health Behaviors on Perceived Physical and Psychological Job Stress Among Korean Manufacturing Workers (제조업 근로자의 건강행위와 직무로 인한 스트레스 자각증상의 관련성)

  • 박경옥;김인석;오영아
    • Korean Journal of Health Education and Promotion
    • /
    • v.21 no.3
    • /
    • pp.195-211
    • /
    • 2004
  • Stress is a primary health promotion issue in worksite research because psychological distress is closely related not only to workers' health status but also to their job performance. This study identified the significant health behaviors affecting workers' job-related stress in Korean manufacturing industry with the national survey data conducted by the Korean Occupational Safety and Health Agency in 2003. A total of 7,818 factory workers in 1,562 manufacturing companies participated in the Korean nation-wide occupational health survey and 3,390 workers answered that they had any stressors in their workplace among the 7,818 workers finally participated in the analysis. Participants were selected by the stratified proportional sampling process by manufacturing industry classification, company size, and company locations (8 metropolitan and 8 non-metropolitan regions) in Korea. Trained interviewers visited the target companies and interviewed the factory workers randomly selected in each company. Smoking, drinking, weight control, exercise, sleeping, break time at work, and perceived fatigue were included in the health behavior construct. Stress symptoms was consisted of physical and psychological stress with 8 items. All survey responses were anonymously coded into the SPSS statistical program and testified using stepwise multiple regression analysis. Male workers were 73.5% and the 30s were 40.0% among the age groups. The married and the high school graduate were majority with 52.1% and 61.8% each. Current smokers were 44.7% and More than 50% of the participants drank alcohol sometimes. No exercise group was 59.3% and the participants who dissatisfied with their daily sleeping hours were 43.5%. In t-test and analysis of variance, the significant general characteristics associated with physical and psychological job stress were young age (p<0.001), single marital status (p<0.001), and short working period at the present company (p<0.001). The health behaviors related to physical job stress were current smoking, weight change during the past one year (p<0.001), weight control effort (p<0.001), exercise (p<0.001), daily sleeping dissatisfaction (p<0.001), break time, and perceived fatigue (p<0.001). All 10 health behavior factors were significantly associated with psychological job stress (p<0.05). Weight change, weight control effort, exercise, daily sleeping dissatisfaction, little break at work, and high perceived fatigue were significant factors affecting job stress. Daily sleeping dissatisfaction, little break at work, little exercise, weight change for the past one year and young age were selected as the significant health behavior and general factors affecting physical job stress symptoms in stepwise multiple regression analysis. The five factors explained 18.9% of the physical stress score variance. Six factors were selected as the significant health behaviors affecting psychological job stress: daily sleeping dissatisfaction, little exercise, frequent drinking alcohol, high perceived fatigue, little break at work, and little weight control effort. The six factors explained 10.6% of the psychological stress score variance.

Small Break LOCA Analysis for RCP Trip Strategy for YGN 3&4 Emergency Procedure Guidelines (영광3, 4호기 비상운전지침용 원자로냉각재펌프 정지전략을 위한 소형냉각재상실사고 분석)

  • Seo, Jong-Tae;Bae, Kyoo-Hwan
    • Nuclear Engineering and Technology
    • /
    • v.27 no.2
    • /
    • pp.203-215
    • /
    • 1995
  • A continued operation of RCPs during a certain small break LOCA may increase unnecessary inventory loss from the RCS causing a severe core uncovery which might lead to a fuel failure. After TMI-2 accident, the CEOG developed RCP trip strategy called “Trip-Two/Leave-Two” (T2/L2) in response to NRC requests and incorporated it in the generic EPG for CE plants. The T2/L2 RCP trip strategy consists of tripping the first two RCPs on low RCS pressure and then tripping the remaining two RCPs if a LOCA has occurred. This analysis determines the RCP trip setpoint and demonstrates the safe operational aspects of RCP trip strategy during a small break LOCA for YGN 3&4. The trip setpoint of the first too RCPs for YGN 3&4 is calculated to be 1775 psia in pressurizer pressure based on the limiting small break LOCA with 0.15 ft$^2$ break size in the hot leg. The analysis results show that YGN 3&4 can maintain the core coolability even if the operator fails to trip the second too RCPs or trips at worst time. Also, the YGN 3&4 RCP trip strategy demonstrates that both the 10 CFR 50.46 requirements on PCT and the ANSI standards 58.8 requirements on operator action time can be satisfied with enough margin. Therefore, it is concluded that the T2/L2 RCP trip strategy with a trip setpoint of 1775 psia for YGN 3&4 can provide improved operator guidance for the RCP operation during accidents.

  • PDF

Study of Production and Material Properties of Micro Screw Using SWCH18A and SUS XM7 Materials (SWCH18A 와 SUS XM7 을 적용한 초소형 나사제작 및 물성분석에 관한 연구)

  • Ra, Seung-Woo;Kim, In-Rak;Hwang, Sung Tack
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.38 no.9
    • /
    • pp.1043-1048
    • /
    • 2014
  • As micro screws feature reduced screw lengths and pitches, the resulting clamping force diminishes because of the reduced length of the actual joints. The elements of the clamping force are material, geometry, and friction. We studied the shrinking size of the screw and the methods to improve the clamping force by changing the material. We developed a micro screw using SWCH18A and SUS XM7 materials, and obtained the precision and thickness of the pitch through three-dimensional measurement. We also measured the external resistance of the micro screw by applying the Vicker's hardness test and conducted a break surface analysis using a break torque test and SEM for obtaining the break characteristics.

A Study on the Goal Setting Method for Increasing the Holed Probability in Slope Putting Stroke on an Artificial Putting Surface

  • Park, Jin;Kim, Ji Hyeon;Jung, Jong Min
    • Korean Journal of Applied Biomechanics
    • /
    • v.27 no.4
    • /
    • pp.269-278
    • /
    • 2017
  • Objective: The purpose of this study was to develop a goal setting method for increasing the probability of a holed in a side inclined putting stroke. Method: Three-dimensional video data was recorded at a frequency of 120 hz per second after synchronizing 19 infrared motion capture systems (Qualisys, Gothenburg, Sweden). Putting green used a polycarbonate plate ($1.2{\times}2.4{\times}0.01meter$) with coefficient of friction (${\mu}=0.062$) and a real curve of the actual hole. Results: The velocity ratio between the club and the ball was 1:1.6 under various ball speed conditions in this study. The overall position of the break is 1 m to 1.4 m from the point where the ball leaves. If there is a slope, the ball follows the target line by the straightening force, and when it reaches 1 m position, the straightening force decreases by 30~50% and reaches to the deviation (break) point which is severely influenced by the slope. From here, the ball is aimed in a direction other than the target, and the size is affected by the slope. Conclusion: If there is a side slope, the ball moves away from the straight line, and the larger the slope, the closer the break point is to the starting point of the ball. Therefore, it is necessary to calculate the degree of departure according to the slope carefully, and it is preferable that the slower the speed is, the more the influence of the slope becomes. It is preferable to use the center of the hole as a reference when calculating the departure.

Effect of Nozzle on LBB Evaluation for Small Diameter Nuclear Piping (직경이 작은 원자력배관의 파단전누설 해석에 미치는 노즐의 영향)

  • Yu, Yeong-Jun;Kim, Yeong-Jin
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.20 no.6
    • /
    • pp.1872-1881
    • /
    • 1996
  • LBB(Leak-Before-Break) analysis is performed for the highest stress location of each different type of mateerials in the nuclear piping line. In most cases, the highest stress occurs in the pipe and nozzle interface location. i.e. terminal end. The current finite element analysis approach utilizes the symmetry condition both for locations near the nozzle and for locationa away from the nozzle to minimize the size of the finite element model and to make analysis simple when calculating the J-integral values at the crack tip. In other words, the nozzle is not included in the finite element model. However, in reality, the symmetric condition is not applicable for the pipe-nozzle interface location. Because the pipe-nozzle interface location is asymmetric due to different stiffenss of the pipe and nozzle(both material and dimensions). The simplified analysis approach for pipe-nozzle interface locaiton is too conservative for a smaller diameter piping. In tlhis paper, various analyses are performed for the range of materials and crack sizes to evaluate the nozzle effect for a LBB anlaysis. This paper presents methodology for developing the piping evaluaiton diagram at the pipe-nozzle interface location.

A Scheduling Method using Task Partition for Low Power System (저전력 시스템을 위한 BET기반 태스크 분할 스케줄링 기법)

  • Park, Sang-Oh;Lee, Jae-Kyoung;Kim, Sung-Jo
    • The KIPS Transactions:PartA
    • /
    • v.18A no.3
    • /
    • pp.93-98
    • /
    • 2011
  • While the use of battery-powered embedded systems has been rapidly increasing, the current level of battery technology has not kept up with the drastic increase in power consumption by the system. In order to prolong system usage time, the battery size needs to be increased. The amounts of power consumption by embedded systems are determined by their hardware configuration and software for manipulating hardware resources. In spite of that, the hardware provides features for lowering power consumption, if those cannot be utilized efficiently by software including operating system, reduction in power consumption is not optimized. In this paper, we propose a BET(Break Even Time)-based scheduling method using task partition to reduce power consumption of multimedia applications in a mobile embedded system environment.

A COMPARATIVE OF RETENTIVE FORCE OF VARIOUS OVERDENTURES USING SEVERAL MAGNETS (수종의 Magnet를 이용한 Overdenture의 유지력에 관한 비교연구)

  • Hur, Kyoung-Sook;Hur, Song-Ju;Cho, In-Ho
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.29 no.2
    • /
    • pp.49-57
    • /
    • 1991
  • The magnets were widely used to increase the retention of overdentures. The purpose of this study was to compare the break load between overdentures and edentulous models. For this study, Model former(U-402) was used for model fabrication and four different magnets were used for evaluation of break load. The artificial saliva was used between overdenture and model. Breakaway loads were tested with an Instron 1122 at a speed of 2mm/min. The results were as follows. 1. The retentivee forces complete dentures with artificial saliva were than the retentive forces of complete detures without artificial saliva. 2. Magnetic overdenture with artificial saliva showed best retentive force, magnetic overdenture without artificial saliva showed the next retentive force, and the complete denture without artificial saliva showed the worst retention. 3. As the magnetic sizes increased, the retentive forces of magnetics were increased. 4. The retentive force of nipple shape magnet is greater than the retentive force of flate shape magnet in the same size.

  • PDF