• 한국농촌생활과학회지
• /
• 제5권2호
• /
• pp.117-123
• /
• 1994

The purpose of this study was to establish the range of the body frame size determination for elderly subjects. Anthropometric data were collected from over 60 years old 229 elderly peoples. Three methods for determining frame size were to measure elbow breadth, ankle breadth, and height to wrist circumference ratio. Among the three variables, ankle breadth exhibited the lowest correlation with skinfold thickness and changed little with age. A pairwise comparision among three methods for determining frame size showed that the highest incidence of overall agreement was achieved when the ankle breadth and elbow breadth were compared. This analysis supported that ankle breadth can be used as an indicator of frame size. Small, medium and large categories of ankle breadth were presented depending on whether the measurements were below the 15th, between the 15th and 85th, and above the 85th percentile for ankle breadth.

• 대한수학회논문집
• /
• 제12권3호
• /
• pp.679-683
• /
• 1997

We obtain new upper bound of the area of a constant breath curve. We estimate the area of a constant breadth curve in terms of its breadth and minimal radius and the arc length of its pedal curve.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.591-596
• /
• 2001

The purpose of this study is to examine the change of half value breadth and residual stress during fatigue process in S45C Steel by X-ray diffraction. For S45C Steel, the relationship between the change in fatigue damage of the specimen and the half value breadth, and residual stress of X-ray diffraction profiles during the fatigue processes has been investigated. The half value breadth(HVB) decreases in he early period of fatigue cycle. The change of HVB is relation to cyclic work hardening. In $10{\sim}20%$ of ratio of fatigue life, the change in the half value breadth is not marked. During fatigue process, the residual stress is changed with fatigue cycle increasing.

• Nuclear Engineering and Technology
• /
• 제7권1호
• /
• pp.15-23
• /
• 1975

냉간 압축가공한 순수 지르코늄의 회복현상을 X-ray line broadening과 미소경도 (microhardness)를 측정하여 연구하였다. Isochronal 소둔한 결과에서 경도나 X-ray line breadth가 30$0^{\circ}C$이하에서는 감소하지 않는다는 것을 알 수 있었다. 같은 크기의 냉간가공도에서 X-ray line breadth의 회복속도는 경도의 회복속도와 다르게 나타났으며 가공도에 상관없이 X-ray line breadth의 회복에 필요한 활성화 에너지는 경도의 회복에 필요한 활성화 에너지보다 작은 것을 알 수 있었다. 8%, 19%, 28% 냉간가공한 지르코늄에서의 X-ray line breadth의 회복에 필요한 활성화 에너지는 각각 64,800cal/gram atom, 56,400 cal/gram atom, 48,500 cal/gram atom이였으며 경도의 회복에 필요한 활성화 에너지는 72,800 cal/gram atom, 64,300 cal/gram atom, 58,600 cal/gram atom인 것으로 나타났다.

• 한국통신학회논문지
• /
• 제36권1C호
• /
• pp.37-47
• /
• 2011

본 논문에서는 다중 입출력 (multiple-input multiple-output: MIMO) 시스템을 위한 깊이 우선 탐색과 (depth-first search) 너비 우선 탐색의 (breadth-first search) 혼용을 바탕으로 한 복호 기법을 제안한다. 제안된 기법은 먼저 탐색 트리를 여러 단계로 나눈 뒤, 깊이 우선 탐색과 너비 우선 탐색 기법 모두의 장점을 이끌어 낼 수 있도록 두 기법의 유기적인 적용을 통하여 각 단계를 탐색한다. 또한, 성능 평가를 통해 두 탐색 기법이 적절히 적용되었을 때, 기존의 복호 기법들보다 상당히 낮은 연산 복잡도를 갖는 것을 확인할 수 있다.

• Asia Marketing Journal
• /
• 제15권3호
• /
• pp.97-115
• /
• 2013

This paper was motivated by two gaps in the extant literature on brand portfolio planning. First, research has shown that, as the number of products connected to a brand increases, the extended product receives more favorable evaluations. However, this result was obtained by comparing two brands with different number of products while controlling the brands' breadths. Hence one may question if the above result would hold when the brand is narrow as well as broad. Second, the literature has investigated the effect of brand breadth on the perceived fit and evaluations of an extended product within a relatively limited range ("narrow vs. broad") and not considered the case of a "very broad" brand. To address these gaps, we propose two hypotheses: 1) the effects of the number of products associated with a brand on the perceived fit and evaluations of a moderately far brand extension are moderated by the brand's breadth (H1); and 2) the relationship between a brand's breadth and a moderately far extension's perceived fit and evaluations looks like an inverse-U shape (H2). Study 1 was conducted to test H1. Study 1 employed a 2 × 2 within-subjects design in which the first factor was the number of products (small (2) or large (5)), and the second factor was brand breadth (narrow or broad). We measured brand breadth as the perceived similarity among products associated with a brand. Participants provided the perceived fit and evaluations of an extended product. Study 2 was conducted to test H2 as well as to replicate Study 1 in a more general setting and with different products. It employed a 2 × 3 within-subjects design, in which the first factor was the number of products (small (2) or large (5)), and the second factor was brand breadth (narrow, broad, or very broad). The results from two experiments support both hypotheses. This paper contributes to the literature on brand extensions in two ways. First, it broadens our understanding of the effects of product number and brand breadth on extended product evaluations by considering the two factors jointly. Second, we believe this study to be the first to present evidence that brand breadth can exert an inverted U-shape effect on the perceived fit and evaluations of an extended product. The results also offer implications for marketers. First, marketers should heed the finding that adding similar products to a narrow brand does not help the brand's extension launch. Second, the finding that the relationship between brand breadth and extended product evaluations might not be linear provides practical implications. While a narrow brand should not keep launching close extensions, nor should a broad brand continue producing far extensions to broaden its breadth. A firm with a broad corporate or family brand might want to consider introducing a new brand instead of adding dissimilar products under the brand umbrella.

• 대한수학회보
• /
• 제36권1호
• /
• pp.15-23
• /
• 1999

We obtain an efficient upper bound of the area of convex curves of constant relative breadth in the Minkowski plane. The estimation is given in terms of the Minkowski are length of pedal curve of original curve.

• Tribology and Lubricants
• /
• 제18권3호
• /
• pp.187-193
• /
• 2002

The half-value breadth off-ray diffraction profile line is generally used for a factor in nondestructive hardness measuring method of steel. In this paper, the problem in using the half-value breadth for the hardness measuring method is evaluated in strain hardened steel. And new hardness measuring method using residual stress is proposed X-ray diffraction test after rolling contact fatigue test of ball bearing with inner race of various hardness are carried out to measure the distribution of residual stress and half-value breadth from surface. The result of this study shows that there is little correlation between half-value breadth and hardness in the higher strength region and in the region increasing the hardness by strain hardening. But the magnitude of residual stress on/under race after rolling contact fatigue test becomes clearly to be correlative with hardness. Thus, it is concluded that the hardness of strain hardened steel can be estimated by this relationship between residual stress and hardness.

• 대한가정학회지
• /
• 제42권7호
• /
• pp.165-178
• /
• 2004

The purpose of this study is to research the facial shape and suggest quantified data for the domestic fashion cordinaton and beauty industry. A measurement survey of 264 female college students aged from 20 to 24, was conducted with photographs of front view and later view taken by digital camera. Two hundred values were generated through the facial measurement program. In the results, for the coefficient of variance of the height was highly related with height, radial length was highly related with radial length, and breadth with highly related with breadth. However Gnation breadth, Zygomatic breadth, Philtrum breadth were lowly related and indefendent with other items.

• 지식경영연구
• /
• 제16권4호
• /
• pp.1-16
• /
• 2015

This paper aims to explore the small and medium sized enterprises'(SMEs') technological innovation through an open innovative strategy. Researchers have identified open innovation as external search 'breadth' and 'depth'. Although an open innovation strategy is well known as an effective way for SMEs' innovation, this stream of research examines differences between pursuing breadth of external knowledge and depth of external knowledge for SEMs' innovation. The sample comprises a total of 1106 SMEs included in the Korean Innovation Survey, and logistic regression analysis and odds ratio comparison were used to evaluate the relationship between external knowledge search and innovation outcomes. The results show that both 'breadth' and 'depth' positively affect the SMEs' innovation. When SMEs are simultaneously pursuing external searching for breadth and depth, however, a negative result on innovation outcome followed because of the lack of their internal resources and capacities. Despite these contributions, we have certain limitations that can be regarded as means of future research. Even though breadth and depth are adopted to measure the way of how a firm sources the external knowledge, companies may place the different weight on each source of knowledge. And also, it is difficult to understand how the knowledge gained through external search contributes to a firm's incremental and radical innovation, respectively.