• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.751-752
• /
• 2005

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.2
• /
• pp.41-50
• /
• 1985

The mathematical analysis of the outflow hydrograph resulting from earth dam-break was studied. DBFW(Dam Break Flood Wave) model based on the breach mechanism and reservoir storage equation was developed and was applied to the Teton and Buffalo-Creek dam. The modeling results showed that the shape of outflow hydrograph, peak discharge and failure duration time had a good agreement with the data analyzed by NWS. The breach mechanisms which exert influence on the outflow hydrograph were consisted of geomorphological characteristics of the reservoir, breach mode, breach width and failure duration time. The earth dams in Korea were classified into four types by the reservoir geomorphology, and water surface elevation-failure duration time-peak discharge relationships were also presented. The methodological procedure made in this paper will provide a basic contribution to dam-break study in river system.

• Journal of Environmental Science International
• /
• v.28 no.2
• /
• pp.211-217
• /
• 2019

A Numerical modeling approach is usually applied to reproduce the physical phenomena of a fill dam-break. The accuracy of the dam-break model depends on the physical structure that defines input variables such as the storage volume, breach formation and progress, and the parameters of the model, which are subjective as they are prescribed by users. In this study, a sensitivity analysis was performed for the nonlinear breach progression curve that was already developed, which includes four parameters. The study focuses on the two of the parameters which control the breach forming time and peak discharge. The model is coupled with a two-dimensional flood simulation model (FLO-2D) to examine flood coverage and depth. It is generally observed that the parameter ${\beta}$ controls only the breach forming time, the parameter ${\gamma}$ is particularly sensitive to the peak flow.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.459-466
• /
• 2017

Several reservoirs that were managed by local governments and the Korea Rural Community Corporation have recently collapsed. One of them is the Goeyeon reservoir in Yeongcheon-si, Gyeongsangbuk-do that collapsed mainly around the spillway due to heavy rain at 9 O'clock, on 21 August 2014. The Goeyeon reservoir was an aging agricultural reservoir over 70 years since it was built. In this study, the collapse situation of the reservoir was reproduced through the DAMBRK model. Flood inundation maps were reconstructed for the breach outflow of the dam analyzed by the DAMBRK model. We estimated the breach duration and outflow of the reservoir as compared with the inundation image taken by the Unmanned Aerial Vehicle (UAV) at the time when the Goeyeon reservoir collapsed. The results of this study are expected to be useful for predicting damage in the downstream inundation area when a reservoir collapses.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.196-196
• /
• 2016

Landslide dam failure presents as a severe natural disaster due to its adverse impact to people and property. If the landslide dams failed, the discharge of a huge volume of both water and sediment could result in a catastrophic flood in the downstream area. In most of previous studies, breaching process used to be considered as a constructed dam, rather than as a landslide dam. Their erosion rate was assumed to relate to discharge by a sediment transport equation. However, during surface erosion of landslide dam, the sediment transportation regime is greatly dependent on the slope surface and the sediment concentration in the flow. This study aims to accurately simulate the outflow hydrograph caused by landslide dam by overtopping through a 2D surface flow erosion/deposition model. The lateral erosion velocity in this model was presented as a function of the shear stress on the side wall. The simulated results were then compared and it was coherent with the results obtained from the experiments.

• Journal of Korea Water Resources Association
• /
• v.49 no.2
• /
• pp.121-132
• /
• 2016

The DAMBRK is applied to Janghyeon and Dongmak reservoirs in Namdaecheon basin, where two reservoirs were failed due to Typhoon Rusa in 2002. Relaxation scheme is added to DAMBRK to consider the tributary cross-section because two reservoirs are in tributary valleys. In addition, this study suggests the method to utilize the reservoir breach formation time of ASDSO (2005) and empirical formulas for peak break outflow from dam to reduce the uncertainty of reservoir breach formulation time. The single break of Janghyeon reservoir and consecutive break of Janghyeon and Dongmak reservoirs with the suggested method are considered. While the breach discharge from reservoirs rushes down, the discharge and water surface elevation along the river are predicted, and the predictions show the attenuation phenomena of reservoir break floodwave. The applicability of the model is validated by comparing the predicted height with field surveyed data, and showing good agreements between predictions and measurements.

• Journal of Convergence for Information Technology
• /
• v.9 no.11
• /
• pp.125-133
• /
• 2019

In this paper, probabilistic flood risk maps were produced for levee break caused by possible flood scenarios. The results of the previous studies were employed for flood stages corresponding to hydrological extreme event quantified uncertainties and then predicted the location of a levee breach. The breach width was estimated by combining empirical equation considered constant width and numerical modeling considered uncertainties on compound geotechnical component. Accordingly, probabilistic breach outflow was computed and probabilistic inundation map was produced by 100 runs of 2D inundation simulation based on reliability analysis. The final probabilistic flood risk map was produced by combining probabilistic inundation map based on flood hazard mapping methodology. The outcomes of the study would be effective in establishing specified emergency actin plan (EAP) and expect to suggest more economical and stable design index.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1846-1851
• /
• 2010

댐붕괴 모델링에 관한 연구가 활성화된 시기는 미국 Baldwin Hills 댐(1964)과 Lower Van Norman(San Fernando) 댐(1971) 붕괴 사고 이후이며 1970년대 발생한 Buffalo Creek 댐(서부 버지니아, 1972), Teton 댐(아이다호, 1976), Laurel Run 댐/Sandy Run 댐(펜실바니아, 1977), Kelly Barnes 댐(조지아, 1977) 붕괴 사고로 인해 미국 댐 안전 관리 프로그램의 포괄적 재검토의 필요성이 제기되었다. 국내에서도 연천댐 붕괴(1996년)와 장현저수지와 동막저수지의 붕괴(2002년)로 하류에 위치한 가옥 및 농경지 침수로 인해 재산피해가 발생한 바 있으며, 2005년 비상대처계획 수립을 의무화하는 제도가 도입되었다. 오늘날 댐 붕괴와 붕괴로 인한 유출 수문곡선을 분석하는데 이용 가능한 수많은 도구들이 존재하고 있다. 가장 잘 알려져 있으며 가장 널리 이용되는 모형은 NWS Dam-Break Flood Forecasting Model(DAMBRK; Fread, 1977)이며 국내 댐 저수지 비상대처계획 수립을 위해 많이 이용되고 있다. DAMBRK 모형의 입력자료는 붕괴지속시간, 결괴부측면경사, 최종결괴부바닥표고, 댐붕괴시작수위 등이 요구되며, 이 중 결괴형성과정에 관련된 매개변수의 선정을 위해서는 댐붕괴 사례연구 자료가 활용되고 있다. 모형으로부터 도출된 붕괴유출수문곡선에 대한 적정성 평가는 과거 경험, 공학적 판단, 첨두유량 예측식에 의해 수행되고 있으며 가장 객관적인 기준이라 판단되는 첨두유출량 예측식은 사례연구 자료의 부족으로 인해 높은 불확실성을 안고 있다. 본 연구는 최근까지 개발된 댐결괴 첨두유출량 예측식을 기반으로 국내 건설된 댐의 대다수를 차지하는 필댐에 대해 댐높이, 댐형식별로 예측식의 적정성을 평가하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.377-377
• /
• 2020

이상기후변화에 따른 홍수피해는 매년 빈번히 발생하고 있고, 이러한 피해에 대비하여 예측 및 대응방안을 신속히 확보할 수 있는 재난예측 및 대응시스템은 필수로 요구되는 실정이다. 강우의 의한 홍수발생과 하천수위 급상승에 의한 제방의 월류 및 파제 메커니즘은 상당히 복잡하고 유동적이며 다양한 불확실성을 포함한다. 본 연구에서는 극치 강수량의 매개변수들의 불확실성을 고려하기 위해 수행된 비정상성 빈도해석 기반의 수문시나리오를 바탕으로 산정된 MCS(Monte Carlo Simulation)기반 확률홍수위를 산정하였고, 이를 활용하여 2차원 제내지 침수해석의 경계조건으로 활용하여 홍수위 변동에 의한 하천 제방 붕괴 변동폭의 범위를 설정하고, 그에 따른 제방붕괴 유출량의 변동 범위를 산정하였다. 또한 확률론적 파제 유입량에 의한 제내지의 침수심과 침수범위를 MCS기반의 2차원 제내지 침수해석을 통해 정량화하여 확률침수심도를 작성하였다. 이러한 홍수발생의 전반적인 메커니즘을 고려하여 매개변수들의 불확실도를 정량적으로 평가함으로써 기존의 결정론적 해석기법보다 신뢰성 있는 침수심 예측결과를 확보하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.231-243
• /
• 2016

This study presents the applicability of two-dimensional (2D) flood inundation model by applying to real irrigation reservoir failure with limited available data. The study area is Sandae Reservoir placed in Gyeongju and downstream area of it and the reservoir was failured by piping in 2013. The breach hydrograph was estimated from one-dimensional (1D) hydrodynamic model and the discharge was employed for upstream boundary of 2D flood inundation model. Topography of study area was generated by integrating digital contour map and satellite data, and Cartesian grids with 3m resolution to consider geometry of building, road and public stadium were used for 2D flood inundation analysis. The model validation was carried out by comparing predictions with field survey data including reservoir breach outflow, flood extent, flood height and arrival time, and identifying rational ranges with allowed error. In addition, the applicability of 2D model is examined using different simulation conditions involving grid size, building and roughness coefficient. This study is expected to contributed to analysis of irrigation reservoirs were at risk of a failure and setting up Emergency Action Plan (EAP) against irrigation reservoir failure.