• Steel and Composite Structures
• /
• 제23권6호
• /
• pp.657-668
• /
• 2017

In the most of previous studies, researchers have restricted their own studies to consider the effect of single walled carbon nanotubes as a reinforcement on the vibrational behavior of structures. In the present work, free vibration characteristics of functionally graded annular plates reinforced by multi-walled carbon nanotubes resting on Pasternak foundation are presented. The response of the elastic medium is formulated by the Winkler/Pasternak model. Modified Halpin-Tsai equation was used to evaluate the Young's modulus of the multi-walled carbon nanotube/epoxy composite samples by the incorporation of an orientation as well as an exponential shape factor in the equation. The exponential shape factor modifies the Halpin-Tsai equation from expressing a straight line to a nonlinear one in the multi-walled carbon nanotubes wt% range considered. The 2-D generalized differential quadrature method as an efficient and accurate numerical tool is used to discretize the equations of motion and to implement the various boundary conditions. The effects of two-parameter elastic foundation modulus, geometrical and material parameters together with the boundary conditions on the frequency parameters of the plates are investigated. This study serves as a benchmark for assessing the validity of numerical methods or two-dimensional theories used to analysis of annular plates.

• 대한전자공학회논문지SD
• /
• 제40권8호
• /
• pp.555-559
• /
• 2003

본 논문에서는 CMOS 소자의 RF 동작을 정확히 예측하기 위해 Si 표면에서의 메탈 라인 사이의 커패시턴스 효과와 표피효과 및 근접효과를 포함한 RF IC 설계를 위한 새로운 CMOS RF 모델을 처음으로 제시하였다. Si 표면에서의 메탈 라인 사이의 커패시턴스는 레이아웃에 기초하여 모델링하였으며, 표피효과는 메탈 라인의 등가회로에 병렬회로를 부가하여 사다리꼴 등가회로로 구현하였다. 근접효과는 사다리꼴 등가회로에서 교차 결합된 인덕턴스 사이의 상호 인덕턴스를 부가함으로써 모델링하였다. 제안된 RF 모델은 BSIM 3v3에 비해 측정 데이터와 잘 일치하였으며, GHz 영역에서 소자 동작의 주파수 종속성을 잘 보여주었다.

• Journal of Electrical Engineering and Technology
• /
• 제5권2호
• /
• pp.197-208
• /
• 2010

Unified power flow controller (UPFC) is the most reliable device in the FACTS concept. It has the ability to adjust all three control parameters effective in power flow and voltage stability. In this paper, a linearized model of a power system installed with a UPFC has been presented. UPFC has four control loops that by adding an extra signal to one of them, increases dynamic stability and load angle oscillations are damped. In this paper, after open loop eigenvalue (electro mechanical mode) calculations, state-space equations have been used to design damping controller and it has been considered to influence active and reactive power flow durations as the input of damping controller, in addition to the common speed duration of synchronous generators as input damper signal. To increase stability, further Lead-Lag and LQR controllers, a novel on-line adaptive controller has been used analytically to identify power system parameters. Closed-loop calculations of the electro mechanical mode verify the improvement of system pole placement after controller designing. Suitable operation of adaptive controller to decrease rotor speed oscillations against input mechanical torque disturbances is confirmed by the simulation results.

• 조명전기설비학회논문지
• /
• 제17권3호
• /
• pp.127-137
• /
• 2003

논문에서는 대규모 계통의 미소신호안전도 평가 및 해석을 위해 고유치 감도/perturbation 이론에 근거한 상정사고 지표를 제안하였으며 이를 실제 계통에 적용한 결과를 기술하였다. 선로정수와 제어기점수에 대한 미소신호 안정도 상정사고 지표를 제시하였고 이로부터 심각한 저주파진동 문제를 발생할 수 있는 파라메타들을 선택하였다. 또한 각 발전기의 발전량 증감에 대한 고유치 변화로부터 미소신호안정도 상정사고를 일으킬 수 있는 발전기들을 선택하였다. 이 논문에서는 모든 결과들을 2000년 KEPCO 실계통의 시간영역해석과 비교 검증하여 제안한 미소신호안정도 상정사고 해석법이 정확함을 확인하였다.

• 한국통신학회논문지
• /
• 제18권11호
• /
• pp.1774-1784
• /
• 1993

본 논문에서는 원추형 복사패턴과 원편파 특성을 가지는 광대역 마이크로스트립 안테나 배열의 설계와 제작과정 및 그 실험결과를 제시하였다. 이 안테나는 6개의 정방형 마이크로스트립 안테나 소자로 구성된 원형 배열 안테나이다. 각 소자 안테나는 기생소자를 가지는 적층구조를 이용하여 대역폭을 넓혔으며, 90도 하이브리드를 부착하려 원편파를 복사할 수 있게 하였다. 논문에서는 소자 안테나와 전력 분배기 그리고 하이브리드의 설계과정과 측정결과를 제시하였다. 또한 위성을 통한 이동통신에 유용하도록 안테나의 복사패턴을 원추형으로 만드는 방법도 제시하였다. 끝으로 제작된 안테나의 측정결과를 보이고 이를 설계치와 비교하였다.

• 한국통신학회논문지
• /
• 제33권9A호
• /
• pp.934-940
• /
• 2008

본 논문에서는 GPS, DCS, PCS, UMTS, Wibro, Bluetooth, S-DMB대역에서 동작 가능한 안테나를 설계하고 제작하였다. 최대한 적은 부피의 안테나로 광대역 특성을 얻기 위해 모노폴 안테나를 기반으로 CPWG(Coplanar Waveguide-fed with Ground) 급전 구조를 사용하였다. 방사패치의 길이와 방사패치와 접지면 간의 간격을 조정하며 시뮬레이션 하였으며, 최적화된 파라미터를 가지고 제작하였다. 제작된 안테나는 VSWR<2에서 1.430Hz$\sim$2.9GHz(67.89%)의 대역폭과 $1.3{\sim}3.7dBi$의 이득 및 전방향성(Omni-directional) 방사패턴을 얻었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권12호
• /
• pp.592-596
• /
• 2005

Recently, substations have been constructed in GIS (Gas Insulated Switchgear) and indoor type because of the increasing difficulties of securing locations. In case of urban substations, it is also common that the substations are exclusively fed by underground cables. Sometimes, the infrastructures in urban area, such as communication facilities, are located near substations to be constructed. In this paper, we examined such a case that a branch office building of KT(Korea Telecom) was located near 154 kV underground GIS substation under construction with about 100 meters of the lateral distance between two facilities. GPR (Ground Potential Rise) at the substation and the transferred earth potential at the KT building through the earth in SLG (Single-Line-to- Ground) fault condition were investigated based on a series of computer simulations. The calculated earth potential at a distance of 100 m from the substation was below 120 V which satisfying the limit value of 650 V.

• Smart Structures and Systems
• /
• 제5권6호
• /
• pp.663-679
• /
• 2009

The use of Micro-Electro-Mechanical Systems (MEMS) accelerometers in geotechnical instrumentation is relatively new but on the rise. This paper describes a new MEMS-based system for in situ deformation and vibration monitoring. The system has been developed in an effort to combine recent advances in the miniaturization of sensors and electronics with an established wireless infrastructure for on-line geotechnical monitoring. The concept is based on triaxial MEMS accelerometer measurements of static acceleration (angles relative to gravity) and dynamic accelerations. The dynamic acceleration sensitivity range provides signals proportional to vibration during earthquakes or construction activities. This MEMS-based in-place inclinometer system utilizes the measurements to obtain three-dimensional (3D) ground acceleration and permanent deformation profiles up to a depth of one hundred meters. Each sensor array or group of arrays can be connected to a wireless earth station to enable real-time monitoring as well as remote sensor configuration. This paper provides a technical assessment of MEMS-based in-place inclinometer systems for geotechnical instrumentation applications by reviewing the sensor characteristics and providing small- and full-scale laboratory calibration tests. A description and validation of recorded field data from an instrumented unstable slope in California is also presented.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.74-77
• /
• 2011

We report a novel extension of 840 nm wavelength- based spectral domain optical tomography to in vivo/real-time human middle ear diagnosis. The system was designed to access the middle ear region with a specifically dedicated handheld probe. The real-time displaying feature was mandatory for in vivo imaging human subject with the handheld probe, and the system could provide about 20 frames per second for 2048 pixels by 1000 A-scans without using any graphics process units under the Labview platform. The inner ear structure of a healthy male volunteer was imaged with the developed system with the axial and lateral resolutions of $15\;{\mu}m$ and $30\;{\mu}m$, respectively. The application of the OCT technology to early diagnose otitis media(OM) is very promising and could be another extensive branch in the OCT field because it provides the depth resolved image including tympanic membrane (TM) and structures below TM whereas the conventional otoscope technique only gives asurface image of the TM.

• 대한화학회지
• /
• 제63권1호
• /
• pp.12-23
• /
• 2019

The new experimental data of liquid-liquid equilibrium (LLE) of aqueous two-phase system (ATPS) consisting of poly(ethylene glycol) 3000 + tri-potassium citrate at different pH were presented. It was found that an increase in pH resulted in the expansion of the two-phase region. The TLL and STL increased with increasing the pH values. The Merchuk equation can be appropriately employed to correlate the binodal curves and also the tie-line compositions were adjusted to both the Othmer-Tobias and Bancroft equations. In order to calculate the compositions of the phase and the ends of the tie-lines, density and refractive indices as two physical properties were used. Finally, the extended UNIQUAC, UNIFAC, Virial-(Mobalegholeslam & Bakhshi) and modified UNIQUAC-FV were used to measure the phase equilibria at different pH. The results of the models suggested that it can be used quite well to correlate the LLE in an aqueous solution of polymer-salt.