• 전기학회논문지
• /
• 제60권9호
• /
• pp.1715-1720
• /
• 2011

Studies suggested an increase in the competitiveness and roles of mainline railways like speed and accessibility improvement, as a fundamental direction of the National Transport Network Plan. At this point, topics presented especially for strengthening the role of human and environment centered transportation: as to the greatly improved speed competitiveness, there are an operational speed above 180km/h ~ 200km/h and traveling within 2 ~ 3 hours among big cities. As to accessibility improvement, there are accessibility to main railway stations within 30 minutes, and the improvement of accessibility, safety, eco-friendliness, amenity etc. As a part of these suggestions, field specific plans were proposed for the establishment of expressed mainline railway network in Korea such as train's, civil structures, trolley lines etc. In this paper we analyzed the conventional lines and systems to figure out whether to change details in terms of H/W of signaling system. Additionally, we reviewed the compatibility or difference of signalling system depending on train's speed. With this result, we deduced the number of virtual blocks specific to the speed of 180km/h, 200km/h and 230km/h, which were showed for the speed improvement considering each variable like blocks, braking distance etc. In this way, we suggested the railway signal system establishment plan considering safety operation.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1795-1804
• /
• 2014

Owing to the reduction in the peak power of a DC railway subsystem, many studies on energy storage system (ESS) applications have received attention. Each application focuses on improving the efficiency and addressing regulation issues by utilizing the huge regenerative energy generated by braking-phase vehicles. The ESS applications are widely divided into installation on a vehicle or in a substation, depending on the target system characteristics. As the main purpose of the ESS application is to reduce the peak power of starting-phase vehicles, an optimized ESS utilization can be achieved by the operating at the highest peak power section. However, the weight of an entire vehicle, including those of the passengers, continuously changes during operation; thus, considering the total power consumption and the discharging point is difficult. As a contribution to the various storage device algorithms, this study deals with ESS on board vehicles and introduces an ESS operating plan for peak-power reduction by investigating the weight of a train on a real-time basis. This process is performed using a train-performance simulator, and the simulation accuracy can be increased because the weight in each phase can be adopted in the simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.228-230
• /
• 2006

While trains perform a complete precision stopping control at stop point, it is essential to keep better commuters comfort in prompt. Because a train's brake force tends to increase a brake effort in a low speed and a low brake effort, a brake force in motor cars must be increased to keep better passenger comfort, to control the special braking qua1ities and to prevent the impact of the automatic coupler rather than trailer's, Rail cars must have a special braking process for the train stopping control. In the train stop mode, the train stopping control is designed to start at 20km/h. It starts by Dynamic brake blending, and then finally stops by only the friction. If these process are not exactly activated, the train may fail a complete precision stop. In this report, it studied the electric and friction brake processing during the precious stopping control. To achieve exact test results, the speed reference has to be reduced the calculated difference. In the precision stopping control. the ways of the keeping brake force in motor car was analyzed and some solutions of controling air pressure was brought up by means of direct test in main line, This study was based on line 5 in Seoul Metropolitan subway.

• 자동차안전학회지
• /
• 제9권2호
• /
• pp.13-19
• /
• 2017

This paper presents safety assessment scenarios for cyclist autonomous emergency braking(AEB) system. To assess the safety performance of AEB in real traffic situation with limited number of scenarios, scenario should reflect the characteristics of real traffic collision cases. For this, statistic data of real traffic car-to-cyclist collision in Korea are analyzed. Many types of accidents are listed and categorized based on the movement of vehicle and cycle just before the collision. Then, the characteristics, main issues and limitations of each scenarios are discussed. Not only the test scenario itself but also the cost and time for the test are very important issues for the test scenarios to actually repeat the test for various systems. Also, the performance of AEB can be effected by the algorithm of AEB and the technical limitation of the sensors and hardwares. Therefore, required number of tests, possibility of dummy destruction and other technical issues are discussed for each scenarios. Based on these information, typical scenarios are selected. Also, using this information, vehicle speed range, cyclist speed and collision point are established. Proposed scenarios are verified and modified based on the vehicle test results. vehicle test was evaluated 5 times for each scenarios. Based on this results, final test scenarios are modified and proposed.

• 대한교통학회지
• /
• 제26권1호
• /
• pp.7-14
• /
• 2008

교통신호기의 설치목적 중 하나는 교통신호기를 통해 차량의 이동을 명확히 규제하여 교통사고를 사전에 방지하는데 있다. 하지만, 부적절한 신호기 위치로 인해 교차로에 접근하는 운전자가 안전운행에 필요한 행태를 나타내지 못한다면, 교통 안전도를 높이기 위한 방안으로 현장상황에 적합한 설치기준 또는 권고사항이 현장조사 및 분석을 통해서 제시되어야 할 필요가 있다. 이러한 배경에서 본 연구는 도심 신호교차로의 신호기 위치가 교차로에 접근하는 운전자의 운전행태에 미치는 영향을 분석하였다. 분석한 결과, 신호기 위치는 딜레마존을 형성하는 운전자의 감속시작지점과 접근속도에 따른 딜레마존 분포에 영향을 미치며, 더욱이 딜레마존 안전율과 밀접한 관계가 있는 것으로 나타났다. 따라서, 본 연구는 신호교차로의 교통안전도를 향상하기 위한 대안으로 교통신호기를 정지선 근처로 이설 또는 설치하는 방안을 다룬 신호기 설치운영 권고안을 제안하여 현장 활용도를 제고하고자 하였다.

• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.122-130
• /
• 2001

In this paper, an operational algorithm for a 2-shaft parallel hybrid electric vehicle is suggested for the minimization of operation cost. The operation cost is obtained as a summation of the engine fuel cost and the motor electricity cost. The electrical cost function is estimated in case of motoring, and generating when the recuperation is carried out during the braking. In addition, weight function is introduced in order to maintain the battery state of charge. Based on the operation algorithm, the optimal engine operation point that minimizes the operation cost is obtained with respect to the required vehicle power for every state of charge of battery. The optimal operation point provides the optimal power distribution of the engine and the motor for a required vehicle power Simulation was performed and the fuel economy of the hybrid vehicle was compared to that of the conventional vehicle. Simulation results showed that hybrid vehicle's fuel economy can be improved as much as 45∼48% compared to the conventional vehicle's.

• 대한인간공학회지
• /
• 제35권1호
• /
• pp.11-27
• /
• 2016

Objective: The purpose of this study was to develop and evaluate high technology adaptive driving controls, such as mini steering wheel-lever system and joystick system, for the people with physical disabilities in the driving simulator. Background: The drivers with severe physical disabilities have problems in operation of the motor vehicle because of reduced muscle strength and limited range of motion. Therefore, if the remote control system with driver-by-wire technology is used for adaptive driving controls for people with physical limitations, the disabled people can improve their quality of life by driving a motor vehicle. Method: We developed the remotely controlled driving simulator with drive-by-wire technology, e.g., mini steering wheel-lever system and joystick system, in order to evaluate driving performance in a safe environment for people with severe physical disabilities. STISim Drive 3 software was used for driving test and the customized Labview program was used in order to control the servomotors and the adaptive driving devices. Thirty subjects participated in the study to evaluate driving performance associated with three different driving controls: conventional driving control, mini steering wheel-lever controls and joystick controls. We analyzed the driving performance in three different courses: straight lane course for acceleration and braking performance, a curved course for steering performance, and intersections for coupled performance. Results: The mini steering wheel-lever system and joystick system developed in this study showed no significant statistical difference (p>0.05) compared to the conventional driving system in the acceleration performance (specified speed travel time, average speed when passing on the right), steering performance (lane departure at the slow curved road, high-speed curved road and the intersection), and braking performance (brake reaction time). However, conventional driving system showed significant statistical difference (p<0.05) compared to the mini steering wheel-lever system or joystick system in the heading angle of the vehicle at the completion point of intersection and the passing speed of the vehicle at left turning. Characteristics of the subjects were found to give a significant effect (p<0.05) on the driving performance, except for the braking reaction time (p>0.05). The subjects with physical disabilities showed a tendency of relatively slow acceleration (p<0.05) at the straight lane course and intersection. The steering performance and braking performance were confirmed that there was no statistically significant difference (p>0.05) according to the characteristics of the subjects. Conclusion: The driving performance with mini steering wheel-lever system and joystick control system showed no significant statistical difference compared to conventional system in the driving simulator. Application: This study can be used to design primary controls with driver-by-wire technology for adaptive vehicle and to improve their community mobility for people with severe physical disabilities.

• 융합정보논문지
• /
• 제8권6호
• /
• pp.59-66
• /
• 2018

보행 시 지면에 대한 수직력에 대한 전단력의 비율, 즉 보행자가 사용한 마찰계수(UCOF)는 미끄러짐 발생 가능성 있는 시점을 식별하는데 사용된다. 신발보행은 신발창 두께와 경도, 뒤꿈치 모양, 밑창 문양 등의 신발 디자인이 사용마찰계수를 변화시킬 것이다. 본 연구에서는 보행 시 신발 착용 유무에 따른 사용마찰계수(UCOF) 차이를 분석하기 위해 성인남녀 21명(여자 10명, 남자 11명, 나이: $25.2{\pm}2.3yrs$, 키: $165.6{\pm}7.2cm$, 몸무게: $62.2{\pm}7.8kg$)을 대상으로 보행속도, 지면반력, 사용마찰계수(UCOF) 최대 시점, CoP-CoM-수직선 각도의 차이를 알아보고, 사용마찰계수(UCOF)와의 상관관계를 분석하였다. 그 결과, 첫째, 보행 시 신발 착용으로 인해 체중수용기(제동기)의 더 이른 시점에 사용마찰계수가 최대치에 도달하고, 또 그 크기도 증가한다. 둘째, CoP-CoM의 Tangent 값과 사용마찰계수(UCOF1)와의 상관관계는 오른발 제동 초기시점(UCOF1_h)보다 추진 후기에 발생하는 왼발(다음발) 착지시점(UCOF2_h)에서 더 높은 상관관계를 보여, 제동기 보다는 추진기(다음 발 제동기)와의 연관성을 시사한다.

• 대한교통학회지
• /
• 제21권6호
• /
• pp.67-73
• /
• 2003

본 연구는 기존의 신호등의 시각적 인지도를 향상시켜 운전자의 인지실수를 예방하고 안전운전을 도모하기 위해 보조녹색신호가 추가된 신호등에 대한 연구를 수행하였다. 기존의 3색, 4색 신호등과 보조녹색신호를 추가로 제시한 3색, 4색 신호등을 자동차 모의실험장치를 통하여 비교한 결과 두 가지의 신호등간의 유의한 차이가 있는 것으로 나타났다. 이러한 결과는 개선된 신호등이 현장 적용시 운전자가 스스로 의식하지 못하는 상태에서 제동시점을 다소 앞당겨준다는 점에서 안전운전에 기여할 수 있는 가능성을 보여주었다. 본 연구 결과는 실제 운전자의 반응을 비교함과 동시에 주관적인 행동반응을 조사함으로써, 연구결과의 실제 적용가능성을 제시하였다는데 그 의의가 있다고 할 수 있다.

• 대한안전경영과학회지
• /
• 제20권4호
• /
• pp.1-6
• /
• 2018

Recently, bicycle has means of effective healthy transportation, and riding the bicycles is considered as popular recreational and sporting activities. Also, the saddle, steering system, driving device and braking device are researched briskly because of consumer's need for driving performance and comfort. Especially, the importance of a cassette responsible for transmission function by transmitting power to the drive shaft through the chain is very focused. The writer conducted structural analysis for the sprocket of each level using the ANSYS widely used for the analysis. Speed shifting performance was enhanced by minimization / simplification of shifting point through a sort of tooth profile of the cassette. By partitioning a clear value type and other shifting point, it has been modified to enable smooth speed-shifting. In addition, as titanium precision forming process, this study studied the molding technique by blanking and dies forging for mass production of the cassette. so it could be expected that the entire drive train would utilize that in the future. The stamping process capability for thin materials for the mass production of the sprockets is applicable to producing automobile parts, so lightweight component production is likely to be possible through that, for the safety of driving.