• 전기학회논문지
• /
• 제60권3호
• /
• pp.544-551
• /
• 2011

This paper presents the circuit arrangement and effective control method of regenerative energy storage system for an electric vehicle using super-capacitors as the braking energy storage element. A bi-directional controlled current flow of the DC-DC converters with the capacitor bank is connected in parallel with battery, and is controlled so that the whole of the braking energy is effectively absorbed into the capacitors and released back to the electric motor upon acceleration. The converter needs the series-parallel switching circuit for making the best use of the series capacitors and for limiting the step-up ratio of the boost converter. The proposed methods are verified by computer simulation and experimental set-up. They are usefully applied to the electric vehicles such as green cars, electric motorcycles, bike, etc which are power- supplied by the electric batteries.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.786-791
• /
• 2007

고속철도차량의 제동시스템은 전기제동장치, 디스크제동장치, 답면제동장치 등 다양한 제동장치들의 조합으로 구성되며 요구되는 제동성능을 충족하는 범위 내에서 에너지의 효율적인 활용과 마찰재의 경제성을 고려하여 각 제동장치에 대한 제동블랜딩 제어 기능을 포함하고 있다. 일반적으로 요구제동거리를 만족하기 위한 열차 전체에 대한 제동력 패턴을 설정하고 전기제동을 최우선적으로 투입하고 부족한 부분에 대하여 기계제동을 사용하여 부족한 부분을 보상하는 방법을 사용하고 있다. 기계제동장치의 대부분을 차지하고 있는 디스크제동장치는 디스크와 패드 사이의 마찰력을 이용하여 제동력을 확보하는 것으로 사용에 따른 마모가 발생한다. 특히, 고속영역에서 사용하는 경우 패드 마모량은 저속에 비하여 급격히 증가하게 되어 패드의 교환 주기를 단축시킬 뿐만 아니라 제동 초기 과정에서 온도의 상승으로 인한 제동효율의 저하를 가져오는 단점이 있다. 따라서, 본 논문에서는 제동거리, 감속도, 감속도 변화율 등 요구되는 제동성능을 만족시키는 범위 내에서 디스크 제동장치의 패드 마모량 감소를 위한 열차 주행속도에 따른 디스크 제동력 패턴을 설정하는 하나의 방법론으로 제시된 제동초기에서부터 정지할 때까지의 디스크제동에너지의 분산을 최소로 하는 최적화 방법을 이용하여 한국형 고속열차를 바탕으로 제작되는 10량 편성의 고속열차를 대상으로 모든 제동장치가 정상인 경우와 1개의 전기제동장치가 고장이 발생한 경우에 대한 패드 마모량을 구하고 현재 설정된 디스크 제동력 패턴에서의 패드 마모량과의 비교 검토를 수행하였다.經章句索引)${\lrcorner}$이분위오절진행료연구(而分爲五節進行了硏究). 본편기재료상견적흔다잡병, 재임상상유흔대적연구가치. 단시통과역대다차전초(但是通過歷代多次轉抄), 유흔다오식, 착간(錯簡), 가차적부분(假借的部分), 인차유흔다불역리해적지방. 여과불참조다종판본화역대주석가적연구성과(如果不參照多種版本和歷代註釋家的硏究成果), 취무법진정영회기본의(就無法眞正領會其本意). 기어저일점(寄於這一點), 본편논문연구료역대판본화주석가적견해(本篇論文硏究了歷代版本和註釋家的見解), 병진행료교감화교주(幷進行了校勘和校註), 재가어료현토급국어주석(再加於了懸吐及國語注釋), 이기갱유조어정확지리해원문적본의(以期更有助於正確地理解原文的本意). 보고하는 바이다. 관련된 부작용(ADR)이 발생하지 않았다. 따라서 UDB는 본 임상연구 기준에서 포함하는 모든 병력의 만성 간질환에서 ALT 수치가 지속적으로 상승해 있는 경우 효과적이고도 안전하게 투여할 수 있는 제제로 생각된다. pH는 4.4이었으며 최적온도(最適溫度)는 $30^{\circ}C$이었다. 3. CHS-3 균주(菌株)의 specific growth rate는 $0.23\;h^{-1}$, generation time 은 3.01h이었다. 4. CHS -13균주(菌株)의 기질소비율(基質消費率)은 81%이었다. 5. CHS-13 균주(菌株)의 형태학적(形態學的) 배양학적(培養學的) 특성(特性)을 조사(調査)한 결과(結果) Candida guilliermondii var. guilliermondii 로

• 조명전기설비학회논문지
• /
• 제24권9호
• /
• pp.85-96
• /
• 2010

The recent environmental protection trend requires more strict energy saving, therefore every transportation system should reduce energy consumption to the minimum value. High-efficiency operation system, energy saving and $CO_2$ emissions shall be addressed as important issues in railway system. These issues are the most essential factors of railway, compared to major public transportation system. Recently, saving energy in the electric railway system has been studied. The efficient use of regenerated energy is considered to save energy. Namely, Using regenerative energy is that to store the energy generated during braking and discharge it again when a vehicle accelerates. Reusing energy stores and discharges energy, consequently enables a complete exchange of energy between vehicles, even if they are not braking and accelerating at precisely the same time, as is most frequently the case in everyday service. This paper analyzes effects of energy saving and $CO_2$-cut by using regenerative energy of electric vehicles.

• Tribology and Lubricants
• /
• 제18권4호
• /
• pp.305-311
• /
• 2002

Three different kinds of brake discs including two coated brake discs and one steel disc were tested under the same experimental conditions on a reduced scale braking test bench. A braking test bench was specially designed to analyse thermo-mechanical and frictional behaviors of two types of brake with different sizes in stop and hold braking modes. Plasma spray coating technique was also used to coat the discs with ceramic powder. During the test four commercial brake pads were coupled with discs. Ceramic coated discs showed good stability in friction coefficient at high speed and high energy braking conditions. But they caused large wear loss of pad mass compared with the steel disc. It was shown that thermal barrier effect in ceramic coated discs adjusted the thermal partition between pad and disc. For a steel disc. it showed fluctuating friction coefficient at high speed but small wear loss of pad mass compared with ceramic coated discs.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.97-107
• /
• 1998

Three different kinds of brake discs including two coated brake discs and one steel disc were tested under the same experimental conditions on a reduced scale braking test bench. Braking test bench was specially designed to analyse thermo-mechanical and frictional behaviors of two sizes of brake discs in stop and hold braking modes. And Plasma spray coating technique was used to coat ceramic powder on the discs. In the test four commercial brake pads were coupled with discs. Ceramic coated discs had shown good stability in friction coefficient at high speed and high energy braking conditions. But they caused large pad mass wear loss compared with the steel disc. It was shown that thermal barrier effect in ceramic coated discs adjusted the thermal partition between pad and disc. For a steel disc, it had shown fluctuating friction coefficient at high speed but a fittie pad mass wear loss compared with ceramic coated discs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1161_1162
• /
• 2009

The recent environmental protection trend requires more strict energy saving, therefore every transportation system should reduce energy consumption to the minimum value. High-efficiency operation system, energy saving and $CO_2$ emissions shall be addressed as important issue in railway system. These issues are the most essential factors of railway, compared to major public transportation system. Recently, saving energy in the electric railway system has been studied. For such new energy saving, the energy storage system is considered for saving energy. Energy saving is possible by efficient use of regenerated energy. Regenerated energy is recycled amongst vehicles by mean of charge and discharge corresponding to powering and braking of electric vehicle operations. This energy saving contributes to cut $CO_2$ to reduce greenhouse gas emissions. Recycling regenerated energy demonstrate significant effect on peak cut of consumption energy in railway substation. Absorption of excess energy avoids regeneration failure due to high traction voltage. Therefore, the energy storage system is needed to be adopted to use regeneration energy when the vehicle is braking.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.120-131
• /
• 2011

This paper proposes two control strategies for the bidirectional Z-source inverters (BZSI) supplied by batteries for electric vehicle applications. The first control strategy utilizes the indirect field-oriented control (IFOC) method to control the induction motor speed. The proposed speed control strategy is able to control the motor speed from zero to the rated speed with the rated load torque in both motoring and regenerative braking modes. The IFOC is based on PWM voltage modulation with voltage decoupling compensation to insert the shoot-through state into the switching signals using the simple boost shoot-through control method. The parameters of the four PI controllers in the IFOC technique are designed based on the required dynamic specifications. The second control strategy uses a proportional plus resonance (PR) controller in the synchronous reference frame to control the AC current for connecting the BZSI to the grid during the battery charging/discharging mode. In both control strategies, a dual loop controller is proposed to control the capacitor voltage of the BZSI. This controller is designed based on a small signal model of the BZSI using a bode diagram. MATLAB simulations and experimental results verify the validity of the proposed control strategies during motoring, regenerative braking and grid connection operations.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.31-42
• /
• 2012

Urban transit vehicle that uses electrical energy, is faster, safer and energy-efficient public transit than other means. As a Research method, the Matlab/Simulink are used to modeling a regenerative brake-capable train, and actual parameters such as powering and braking characteristics, all kinds of resistance, passenger load, velocity, gradient, radius of curve etc and powering and breaking commands per time or distance are inputted to train's dynamic equation, then a simulation program is made and used to yield train driving pattern and driving time and the amount of driving energy used thereby at auto and manual operation and at all sector.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1737-1741
• /
• 2014

The railway ECB(Eddy Current Brake) is used for high speed vehicle of railway like as TGV, ICE, JR-500 because it has stable braking force at high speed. But it is not effective at low speed and it is difficult to save energy due to the excitation of electro-magnet. Although ECB with permanent magnet is used for roller-coaster, it can not control the braking force without clutch. In this paper, the shield moving ECB with PM is proposed for application of railway vehicle. The angle of shield can be changed for various braking force. It changes the flux amount from PM, then the braking force will be reduced. The brake of 800W is simulated by using the software, "Ansoft Maxwell". The characteristics of braking will be shown by the shapes of magnet, disk and various speeds.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권11호
• /
• pp.611-616
• /
• 1999

The introduction of the eddy current braking(ECB) system in HSRT(high speed railway train) is known to be advantageous, in that the system is independent on wheel-rail adhesion coefficient which is greatly affected by weather condition. It also minimize the maintenance of the brake system and does not require any additional electric energy because it is powered form the regenerated power at the time of the braking. In this study, the braking and attraction forces of the ECB are simulated by 2-D FEM and are experimentally verified on a down-scaled prototype. A control algorithm of the ECB is proposed to generate constant braking torque using linear variation of the reference current according to speed. Experimental results shows that the constant torque is generated over all operating speed region by developed control algorithm.