• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.261-264
• /
• 1997

A contactless eddy current type braking system is developed to take advantages of the recent brake system which uses hydraulic force can show high efficiency in a certain velocity region, but not in a high velocity region, and has initial response delay time and pressure build-up time which make stopping distance longer. These are the limits of mechanical brake system of a contact type, which makes a concept brake system required. So, in this paper, the contactless brake system .of a inductive current type is chosen instead of hydraulic brake system. This brake system can be used almost forever for being no wear and contributed to lightening weight of a vehicle. Besides, the contactless brake system can be used as that of electric or solar car with anti-lock brake system. The analysis of induced electromotive force and braking torque obtained with theoretical approximate model, the design of a braking system and a nonlinear controller, and the results of simulation of the ABS, experiment are included.

• Steel and Composite Structures
• /
• 제21권4호
• /
• pp.949-962
• /
• 2016

The braking hose in the automotive hydraulic braking system exhibits the complicated anisotropic large deformation while its movable end is moving along the cyclic path according to the steering and bump/rebound motions of vehicle. The complicated large deformation may cause not only the interference with other adjacent automotive parts but also the durability problem resulting in the fatal microcraking. In this regard, the design of high-durable braking hose with the interference-free layout becomes a hot issue in the automotive industry. However, since it has been traditionally relied on the cost-/time-consuming trial and error experiments, the cost- and time-effective optimum design method that can replace the experiment is highly desirable. Meanwhile, the hose deformed configuration and fatigue life are different for different hose cyclic paths, so that their characteristic investigation becomes an important preliminary research subject. As a preliminary step for developing the optimum design methodology, we in this study investigate the hose deformed configuration and the fatigue life for four representative hose cyclic paths.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.535-538
• /
• 2005

Today, most fixed-wing aircrafts are equipped with the antiskid brake system. It can modulate braking moments in the wheels optimally, when an aircraft is landing. So it can reduce landing distance and increase safeties. The antiskid brake system for an aircraft are mainly composed of braking moment modulators (hydraulic control valves) and brake control unit. In this paper, a Mark IV type - fully digital - brake controller is studied. For the development of its control algorithms, a 5-DOF (Degree of Freedom) aircraft landing model is composed in the form of matlab/simulink model at first. Then, braking moment control algorithms using wheel decelerations and slips are made. The developed algorithms are tested in software simulations using state-flow toolboxes in matlab/simulink model. Also, a real-time simulation systems are made, which use hydraulic brake systems of a real aircraft, pressure control valves and its controller as hardware components of HIL(Hardware In-the-Loop) simulation. Algorithms tested in software simulations are coded into the controller and the real-time landing simulations are made in very severe road conditions. The real-time simulation results are presented.

• International Journal of Automotive Technology
• /
• 제3권4호
• /
• pp.165-170
• /
• 2002

For a vehicle Anti-lock Braking System (ABS), the control target is to maintain friction coefficients within maximum range to ensure minimum stopping distance and vehicle stability. But in order to achieve a directionally stable maneuver, tire side forces must be considered along with the braking friction. Focusing on combined braking and turning operation conditions, this paper presents a new control scheme for an ABS controller design, which calculates optimal target wheel slip ratio on-line based on vehicle dynamic states and prevailing road condition. A fuzzy logic approach is applied to maintain the optimal target slip ratio so that the best compromise between braking deceleration, stopping distance and direction stability performances can be obtained for the vehicle. The scheme is implemented using an 8-DOF nonlinear vehicle model and simulation tests were carried out in different conditions. The simulation results show that the proposed scheme is robust and effective. Compared with a fixed-slip ratio scheme, the stopping distance can be decreased with satisfactory directional control performance meanwhile.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.653-661
• /
• 2016

This paper proposes a capacitance estimation method of the dc-link capacitor for brushless DC motor (BLDCM) drive systems. In order to estimate the dc-link capacitance, the BLDCM is operated in quadrant-II or -IV among four-quadrant operation. Quadrant-II and -IV are called reverse braking and forward braking, respectively. During the braking operation of the BLDCM, the capacitor is charged by the phase current and then the voltage is increased during the braking operation time. The capacitor current and voltage can be obtained by using the phase current sensor of BLDCM and the dc-link voltage sensor. The capacitance and be easily obtained by the voltage equation of the capacitor. The proposed method guarantees the reliable and simple calculation of the dc-link capacitance without additional hardware system except several the sensors already installed for the motor control system. The effectiveness of the proposed method is verified through both the simulation and experimental results.

• 한국항공운항학회지
• /
• 제24권3호
• /
• pp.62-68
• /
• 2016

According to the accident/incident reports of aircraft runway overruns and excursions, it generally shows runway friction reduction and aircraft braking capability deterioration are the basic causes due to adverse weather. Although surface of paved runway gets wet, it also should give good friction capability. If runway surface is worn due to long time usage and friction capability is reduced due to rubber accumulation or weather conditions(snow, rain, ice etc.), airport authorities should rapidly measure friction coefficient and give them to relevant persons through aeronautical information system and support safe takeoff and landing. Operation wise, these information of friction coefficient reduction should be lead to aircraft performance adjustments, but the data from manufacturer(performance manual) are airplane braking coefficient and the data from airport authorities are vehicle measured braking coefficient. But these two data are considered as the same meaning although the definite relationship between them is not clarified yet. So I am trying to search for the technical background of these two data and suggest reasonable method to use them efficiently.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권11호
• /
• pp.611-616
• /
• 1999

The introduction of the eddy current braking(ECB) system in HSRT(high speed railway train) is known to be advantageous, in that the system is independent on wheel-rail adhesion coefficient which is greatly affected by weather condition. It also minimize the maintenance of the brake system and does not require any additional electric energy because it is powered form the regenerated power at the time of the braking. In this study, the braking and attraction forces of the ECB are simulated by 2-D FEM and are experimentally verified on a down-scaled prototype. A control algorithm of the ECB is proposed to generate constant braking torque using linear variation of the reference current according to speed. Experimental results shows that the constant torque is generated over all operating speed region by developed control algorithm.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.56-61
• /
• 2013

This paper presents a development of the Advanced Emergency Braking (AEB) Algorithm for passenger vehicles. The AEB is the system to slow the vehicle and mitigate the severity of an impact when a rear end collision probability is increased. To mitigate a rear end collision, the AEB comprises of a millimeter wave radar sensor, CCD camera and vehicle parameters of which are processed to judge the likelihood of a collision occurring. The main controller of the AEB algorithm is composed of the two control stage: upper and lower level controller. By using the collected obstacle information, the upper level controller of the main controller decides the control mode based not only on parametric division, but also on physical collision capability. The lower level controller determines warning level and braking level to maintain the longitudinal safety. To decide the braking level, Last Ponit To Brake and Steer (LPTB/LPTS) are compared with current driving statues. To demonstrate the control performance of the proposed AEBS algorithm's, closed-loop simulation of the AEBS was conducted by using the Matlab simlink and CarSim software.

• 한국철도학회논문집
• /
• 제12권4호
• /
• pp.582-589
• /
• 2009

회생에너지는 회생 전동차와 역행 전동차의 순간적인 오버랩 경우를 제외하고, 전동차내 저항기 또는 전차선의 저항에 의해 열로서 사라지게 된다. 에너지자정시스템은 전동차 제동시 발생되어 재활용되지 못하고 사라지는 회생 에너지를 에너지저장시스템에 저장하고 전동차가 역행할 때 에너지저장시스템으로부터 에너지를 공급하여 도시철도시스템에서 회생 에너지를 재할용하는 시스템이다. 동시에 역행과 제동하는 차량이 존재하지 않을 지라도 차량간 에너지의 완전한 교환이 이루어 질 수 있다. 따라서 에너지저장시스템은 에너지를 저장하고 재활용함으로서 에너지를 절감할 수 있는 유용한 장치이다. 에너지저장시스템은 운행시격과 관계가 깊은데, 운행 시격이 짧은 경우보다 큰 경우 전동차 회생시 회생 에너지가 모두 에너지저장시스템으로 저장되므로 저장된 에너지를 활용할 수 있어 도시철도 운영기관의 에너지 절감율이 높아지게 된다. 반대로 운행 시격이 짧을 경우 한 변전소 구간 내에 전동차 여러 편성이있을 수 있다. 이때 하나의 전동차 회생시 이 회생 에너지가 주변의 역행 전동차에 공급되면 에너지저장시스템으로 들어오는 회생 에너지는 적을 것이다. 따라서 본 논문은 에너지저장시스템을 적용하는데 있어서 악조건인 운행 시격이 국내에서 가장 짧은 서울메트로 2호선을 대상으로 에너지저장시스템 적용 효과를 에너지절감 측면에서 현장 실측과 시뮬레이션을 통해 분석하고자 한다.

• 대한교통학회지
• /
• 제30권5호
• /
• pp.83-90
• /
• 2012

운전자가 위급한 상황을 인지하였을 경우 일반적으로 가장 먼저 급제동 조치를 취하게 된다. 그렇기 때문에 교통사고 현장에서 가장 흔하게 볼 수 있는 흔적이 급제동흔적, 즉 스키드마크라 할 수 있다. 오늘날까지 스키드마크의 길이를 측정해서 사고 당시 속도를 추정하고 이를 통해 과속 여부를 판단하고 있다. 그러나 스키드마크의 길이를 통해 추정된 속도는 불완전 제동구간의 감속정도를 배제한 활주직전의 속도로써 제동직전 속도와는 다소 차이를 보인다. 최근 연구에서 제동직전 속도를 추정하기 위해 실차 실험을 통해 몇가지 방법이 제시되었으나, 물리적 원칙에 입각하여 제동직전 속도를 산정할 수 있는 근본적인 방법을 제시하지 못하였다. 그 중에서도 가장 핵심적인 사항이 불완전 제동구간과 활주구간의 감속도를 파악하는 것이며, 본 연구에서는 승용차와 대형차의 실차 급제동 실험을 통해서 불완전 제동구간과 활주구간의 감속도 경향을 분석하였다. 본 연구는 자동차의 실질적인 제동직전 주행속도를 산출할 수 있도록 기초정보를 제공하고 나아가서는 현행보다 과속 적용의 범주가 확대됨에 따라 운전자의 경각심을 유발하여 국가 교통사고 감소에 일조할 수 있을 것으로 기대된다.